LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Matthias Kaehlcke <mka@chromium.org>,
	Andy Gross <agross@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Amit Kucheria <amitk@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Thara Gopinath <thara.gopinath@linaro.org>,
	"open list:DRM DRIVER FOR MSM ADRENO GPU" 
	<linux-arm-msm@vger.kernel.org>,
	Linux PM <linux-pm@vger.kernel.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 4/4] arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones
Date: Mon, 4 Oct 2021 22:12:04 -0500	[thread overview]
Message-ID: <YVvChGwyiBF+TjlB@yoga> (raw)
In-Reply-To: <CAA8EJprYij6pWD1A17yr1+5-n5fKPW=YDA_-2+f8h6JnEh4myw@mail.gmail.com>

On Mon 04 Oct 15:56 CDT 2021, Dmitry Baryshkov wrote:

> On Mon, 4 Oct 2021 at 23:13, Bjorn Andersson <bjorn.andersson@linaro.org> wrote:
> >
> > On Wed 29 Sep 11:40 PDT 2021, Matthias Kaehlcke wrote:
> >
> > > On Thu, Sep 23, 2021 at 02:23:11PM -0700, Bjorn Andersson wrote:
> > > > Downstream defines four ADC channels related to thermal sensors external
> > > > to the PM8998 and two channels for internal voltage measurements.
> > > >
> > > > Add these to the upstream SDM845 MTP, describe the thermal monitor
> > > > channels and add thermal_zones for these.
> > > >
> > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > > > ---
> > > >
> > > > In addition to the iio channels exposed by v1, Daniel wanted thermal_zones...
> > > >
> > > > Changes since v1:
> > > > - Enable the pm8998_adc_tm and describe the ADC channels
> > > > - Add thermal-zones for the new channels
> > > >
> > > >  arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 128 ++++++++++++++++++++++++
> > > >  1 file changed, 128 insertions(+)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> > [..]
> > > > +&pm8998_adc {
> > > > +   adc-chan@4c {
> > > > +           reg = <ADC5_XO_THERM_100K_PU>;
> > > > +           label = "xo_therm";
> > > > +   };
> > > > +
> > > > +   adc-chan@4d {
> > > > +           reg = <ADC5_AMUX_THM1_100K_PU>;
> > > > +           label = "msm_therm";
> > > > +   };
> > > > +
> > > > +   adc-chan@4f {
> > > > +           reg = <ADC5_AMUX_THM3_100K_PU>;
> > > > +           label = "pa_therm1";
> > > > +   };
> > > > +
> > > > +   adc-chan@51 {
> > > > +           reg = <ADC5_AMUX_THM5_100K_PU>;
> > > > +           label = "quiet_therm";
> > > > +   };
> > > > +
> > > > +   adc-chan@83 {
> > > > +           reg = <ADC5_VPH_PWR>;
> > > > +           label = "vph_pwr";
> > > > +   };
> > > > +
> > > > +   adc-chan@85 {
> > > > +           reg = <ADC5_VCOIN>;
> > > > +           label = "vcoin";
> > > > +   };
> > > > +};
> > > > +
> > > > +&pm8998_adc_tm {
> > > > +   status = "okay";
> > > > +
> > > > +   xo-thermistor@1 {
> > > > +           reg = <1>;
> > > > +           io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
> > > > +           qcom,ratiometric;
> > > > +           qcom,hw-settle-time-us = <200>;
> > > > +   };
> > > > +
> > > > +   msm-thermistor@2 {
> > > > +           reg = <2>;
> > > > +           io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>;
> > > > +           qcom,ratiometric;
> > > > +           qcom,hw-settle-time-us = <200>;
> > > > +   };
> > > > +
> > > > +   pa-thermistor@3 {
> > > > +           reg = <3>;
> > > > +           io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>;
> > > > +           qcom,ratiometric;
> > > > +           qcom,hw-settle-time-us = <200>;
> > > > +   };
> > > > +
> > > > +   quiet-thermistor@4 {
> > > > +           reg = <4>;
> > > > +           io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>;
> > > > +           qcom,ratiometric;
> > > > +           qcom,hw-settle-time-us = <200>;
> > > > +   };
> > > > +};
> > > > +
> > >
> > > The example in the 'qcom,spmi-adc-tm5' binding specifies 'qcom,ratiometric'
> > > and 'qcom,hw-settle-time-us' for both the ADC and the thermal monitor, so do
> > > several board files (e.g. sm8250-mtp.dts and qrb5165-rb5.dts). This apparent
> > > redundancy bothered me earlier, it's not really clear to me whether it's
> > > needed/recommended or not. Do you happen to have any insights on this?
> >
> > Hmm, you're right and I missed this in defining my channels. I've not
> > looked at this detail, just got reasonable readings from my thermal
> > zones and was happy about that.
> >
> > Dmitry, do you have any further insights why these properties are
> > supposed to be duplicated between the adc channel and the thermal zones?
> 
> Because both ADC channel and thermal zone registers should be
> programmed accordingly.
> 

I presume our question is "why" to this particular part. The actual
implementation thereof seems reasonable.

Regards,
Bjorn

  reply	other threads:[~2021-10-05  3:12 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-23 21:23 [PATCH v2 0/4] arm64: dts: qcom: sdm845: Add thermal zones for PM8998 ADC Bjorn Andersson
2021-09-23 21:23 ` [PATCH v2 1/4] dt-bindings: thermal: qcom: add HC variant of adc-thermal monitor bindings Bjorn Andersson
2021-09-23 21:23 ` [PATCH v2 2/4] thermal/drivers/qcom/spmi-adc-tm5: Add support for HC variant Bjorn Andersson
2021-09-29 19:55   ` Vladimir Zapolskiy
2021-09-23 21:23 ` [PATCH v2 3/4] arm64: dts: qcom: pm8998: Add ADC Thermal Monitor node Bjorn Andersson
2021-11-18 22:04   ` Dmitry Baryshkov
2021-09-23 21:23 ` [PATCH v2 4/4] arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones Bjorn Andersson
2021-09-29 18:40   ` Matthias Kaehlcke
2021-10-04 20:15     ` Bjorn Andersson
2021-10-04 20:56       ` Dmitry Baryshkov
2021-10-05  3:12         ` Bjorn Andersson [this message]
2021-10-05 20:30         ` Thara Gopinath
2021-10-05 21:52           ` Bjorn Andersson
2021-10-05 22:21             ` Thara Gopinath
2021-10-05 22:47               ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YVvChGwyiBF+TjlB@yoga \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=amitk@kernel.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=thara.gopinath@linaro.org \
    --subject='Re: [PATCH v2 4/4] arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zones' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).