LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Paul Menzel <pmenzel@molgen.mpg.de>
To: Realtek linux nic maintainers <nic_swsd@realtek.com>,
	Heiner Kallweit <hkallweit1@gmail.com>
Cc: netdev@vger.kernel.org,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: r8169: Link only up after 16 s (A link change request failed with some changes committed already. Interface enp3s0 may have been left with an inconsistent configuration, please check.)
Date: Thu, 23 May 2019 13:00:31 +0200	[thread overview]
Message-ID: <a05b0b6c-505c-db61-96ac-813e68a26cc6@molgen.mpg.de> (raw)


[-- Attachment #1.1: Type: text/plain, Size: 1940 bytes --]

Dear Linux folks,


I optimized the Linux kernel configuration on my ASRock E350M1, and it now
boots really fast.

Unfortunately, that seems to cause the network driver to hit some corner
case, so that the link is supposedly down, although it should be up. The
cable is plugged in the whole time.

```
[    2.990757] libphy: r8169: probed
[    2.992661] r8169 0000:03:00.0 eth0: RTL8168e/8111e, bc:5f:f4:c8:d3:98, XID 2c2, IRQ 28
[    2.992669] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.294484] usb 5-2: new low-speed USB device number 2 using ohci-pci
[    3.458711] usb 5-2: New USB device found, idVendor=1241, idProduct=1122, bcdDevice= 1.00
[    3.458718] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.485065] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/0003:1241:1122.0001/input/input14
[    3.485320] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0
[    3.967622] random: crng init done
[    3.967628] random: 7 urandom warning(s) missed due to ratelimiting
[    4.323449] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    4.363774] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[    4.576887] r8169 0000:03:00.0 enp3s0: Link is Down
[    4.577167] A link change request failed with some changes committed already. Interface enp3s0 may have been left with an inconsistent configuration, please check.
[   16.377520] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[   16.377553] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
```

It happens with all Linux kernels I tried. Please find all Linux
messages attached.

Could you please tell me, how this can be debugged and solved?


Kind regards,

Paul

[-- Attachment #1.2: 20190516--asrock-e350m1-dmesg-r8169.txt --]
[-- Type: text/plain, Size: 49638 bytes --]

[    0.000000] Linux version 5.1.0-10952-gd19283a8021c (root@ee888abba79b) (gcc version 8.3.0 (Debian 8.3.0-7)) #39 SMP Wed May 15 22:38:33 UTC 2019
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c7d47fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7d48000-0x00000000c7ffffff] type 16
[    0.000000] BIOS-e820: [mem 0x00000000c8000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
[    0.000000] kmemleak: Kernel memory leak detector disabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASROCK E350M1/E350M1, BIOS 4.9-1671-g6644a75b0e 05/16/2019
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1599.936 MHz processor
[    0.006000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.006006] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.006015] last_pfn = 0x11f000 max_arch_pfn = 0x1000000
[    0.006026] MTRR default type: uncachable
[    0.006028] MTRR fixed ranges enabled:
[    0.006031]   00000-9FFFF write-back
[    0.006034]   A0000-BFFFF uncachable
[    0.006036]   C0000-FFFFF write-back
[    0.006038] MTRR variable ranges enabled:
[    0.006042]   0 base 0FFC00000 mask FFFC00000 write-protect
[    0.006045]   1 base 0C0000000 mask FF8000000 write-back
[    0.006047]   2 base 080000000 mask FC0000000 write-back
[    0.006050]   3 base 000000000 mask F80000000 write-back
[    0.006051]   4 disabled
[    0.006052]   5 disabled
[    0.006054]   6 disabled
[    0.006055]   7 disabled
[    0.006058] TOM2: 000000011f000000 aka 4592M
[    0.006259] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.006556] check: Scanning 1 areas for low memory corruption
[    0.006561] initial memory mapped: [mem 0x00000000-0x163fffff]
[    0.006721] BRK [0x15ee5000, 0x15ee5fff] PGTABLE
[    0.006743] BRK [0x15ee6000, 0x15ee6fff] PGTABLE
[    0.006756] ACPI: Early table checksum verification disabled
[    0.006882] ACPI: RSDP 0x00000000000F0800 000024 (v02 COREv4)
[    0.006889] ACPI: XSDT 0x00000000C7D490E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20190509)
[    0.006903] ACPI: FACP 0x00000000C7D4B840 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20190509)
[    0.006916] ACPI: DSDT 0x00000000C7D49280 0025B6 (v02 COREv4 COREBOOT 00010001 INTL 20190509)
[    0.006924] ACPI: FACS 0x00000000C7D49240 000040
[    0.006929] ACPI: FACS 0x00000000C7D49240 000040
[    0.006934] ACPI: SSDT 0x00000000C7D4B940 00008A (v02 COREv4 COREBOOT 0000002A CORE 20190509)
[    0.006941] ACPI: APIC 0x00000000C7D4B9D0 00005C (v02 COREv4 COREBOOT 00000000 CORE 20190509)
[    0.006947] ACPI: HEST 0x00000000C7D4BA30 000028 (v01 COREv4 COREBOOT 00000000 CORE 20190509)
[    0.006953] ACPI: SSDT 0x00000000C7D4BA60 00168E (v02 AMD    ALIB     00000001 MSFT 04000000)
[    0.006960] ACPI: SSDT 0x00000000C7D4D0F0 0003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.006967] ACPI: VFCT 0x00000000C7D4D4D0 00E269 (v01 COREv4 COREBOOT 00000000 CORE 20190509)
[    0.006973] ACPI: HPET 0x00000000C7D5B740 000038 (v01 COREv4 COREBOOT 00000000 CORE 20190509)
[    0.006992] ACPI: Local APIC address 0xfee00000
[    0.007000] 3706MB HIGHMEM available.
[    0.007004] 885MB LOWMEM available.
[    0.007006]   mapped low ram: 0 - 375fe000
[    0.007007]   low ram: 0 - 375fe000
[    0.007022] BRK [0x15ee7000, 0x15ee7fff] PGTABLE
[    0.017911] Zone ranges:
[    0.017915]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.017919]   Normal   [mem 0x0000000001000000-0x00000000375fdfff]
[    0.017922]   HighMem  [mem 0x00000000375fe000-0x000000011effffff]
[    0.017924] Movable zone start for each node
[    0.017925] Early memory node ranges
[    0.017928]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.017930]   node   0: [mem 0x0000000000100000-0x00000000c7d47fff]
[    0.017932]   node   0: [mem 0x0000000100000000-0x000000011effffff]
[    0.022084] Zeroed struct page in unavailable ranges: 99097 pages
[    0.022089] Initmem setup node 0 [mem 0x0000000000001000-0x000000011effffff]
[    0.022095] On node 0 totalpages: 945383
[    0.022098]   DMA zone: 40 pages used for memmap
[    0.022099]   DMA zone: 0 pages reserved
[    0.022101]   DMA zone: 3999 pages, LIFO batch:0
[    0.022314]   Normal zone: 2175 pages used for memmap
[    0.022315]   Normal zone: 222718 pages, LIFO batch:63
[    0.033674]   HighMem zone: 718666 pages, LIFO batch:63
[    0.076252] Using APIC driver default
[    0.076530] ACPI: Local APIC address 0xfee00000
[    0.076555] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.076562] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.076566] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.076569] ACPI: IRQ0 used by override.
[    0.076572] ACPI: IRQ9 used by override.
[    0.076576] Using ACPI (MADT) for SMP configuration information
[    0.076580] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.076592] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.076618] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.076626] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.076630] After setup_arch
[    0.076631] After mm_init_cpumask
[    0.076642] After setup_command_line
[    0.076643] After setup_nr_cpu_ids
[    0.076646] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.076909] percpu: Embedded 33 pages/cpu s102668 r0 d32500 u135168
[    0.076922] pcpu-alloc: s102668 r0 d32500 u135168 alloc=33*4096
[    0.076924] pcpu-alloc: [0] 0 [0] 1 
[    0.076951] After setup_per_cpu_areas
[    0.076952] After smp_perpare_boot_cpu
[    0.076954] After boot_cpu_hotplug_init
[    0.076960] Built 1 zonelists, mobility grouping on.  Total pages: 943168
[    0.076965] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.1.0-10952-gd19283a8021c root=/dev/sda1 rw noisapnp cryptomgr.notests quiet memory_corruption_check=1 memory_corruption_check_size=512k memory_corruption_check_period=5 iomem=relaxed apparmor=0 selinux=0 kmemleak=off initcall_blacklist=serial8250_init udev.children_max=2 udev.log_priority=info
[    0.077355] blacklisting initcall serial8250_init
[    0.077710] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.077884] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.077894] Initializing CPU#0
[    0.113006] Initializing HighMem for node 0 (000375fe:0011f000)
[    0.113011] add_highpages_with_active_regions: start_pfn = 226814, end_pfn = 1175552
[    0.113015] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113019] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113021] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113024] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113026] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113029] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113031] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113034] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113036] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113039] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113041] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113043] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113046] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113049] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113051] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113054] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113056] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113059] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113061] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113063] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 226814, e_pfn = 226814, before for loop
[    0.113066] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 226814, e_pfn = 818504, before for loop
[    0.299829] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 1048576, e_pfn = 1175552, before for loop
[    0.339904] Initializing Movable for node 0 (00000000:00000000)
[    0.339908] add_highpages_with_active_regions: start_pfn = 0, end_pfn = 0
[    0.339911] add_highpages_with_active_regions: for_each_free_mem_range: i = 8589934592, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339914] add_highpages_with_active_regions: for_each_free_mem_range: i = 12884901889, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339917] add_highpages_with_active_regions: for_each_free_mem_range: i = 17179869185, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339919] add_highpages_with_active_regions: for_each_free_mem_range: i = 21474836481, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339922] add_highpages_with_active_regions: for_each_free_mem_range: i = 25769803777, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339924] add_highpages_with_active_regions: for_each_free_mem_range: i = 30064771073, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339926] add_highpages_with_active_regions: for_each_free_mem_range: i = 34359738369, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339929] add_highpages_with_active_regions: for_each_free_mem_range: i = 38654705665, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339931] add_highpages_with_active_regions: for_each_free_mem_range: i = 42949672961, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339934] add_highpages_with_active_regions: for_each_free_mem_range: i = 47244640257, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339936] add_highpages_with_active_regions: for_each_free_mem_range: i = 51539607553, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339938] add_highpages_with_active_regions: for_each_free_mem_range: i = 55834574849, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339941] add_highpages_with_active_regions: for_each_free_mem_range: i = 60129542145, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339943] add_highpages_with_active_regions: for_each_free_mem_range: i = 64424509441, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339945] add_highpages_with_active_regions: for_each_free_mem_range: i = 68719476737, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339948] add_highpages_with_active_regions: for_each_free_mem_range: i = 73014444033, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339950] add_highpages_with_active_regions: for_each_free_mem_range: i = 77309411329, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339953] add_highpages_with_active_regions: for_each_free_mem_range: i = 81604378625, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339955] add_highpages_with_active_regions: for_each_free_mem_range: i = 85899345921, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339958] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313217, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339960] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313218, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.339963] add_highpages_with_active_regions: for_each_free_mem_range: i = 90194313219, nid = 0, pfn = 0, e_pfn = 0, before for loop
[    0.346229] Memory: 3645508K/3781532K available (8957K kernel code, 746K rwdata, 2908K rodata, 1144K init, 640K bss, 136024K reserved, 0K cma-reserved, 2874664K highmem)
[    0.346241] virtual kernel memory layout:
                   fixmap  : 0xfff91000 - 0xfffff000   ( 440 kB)
                 cpu_entry : 0xffa00000 - 0xffa4d000   ( 308 kB)
                   pkmap   : 0xff600000 - 0xff800000   (2048 kB)
                   vmalloc : 0xf7dfe000 - 0xff5fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf75fe000   ( 885 MB)
                     .init : 0xd5c6b000 - 0xd5d89000   (1144 kB)
                     .data : 0xd58bf498 - 0xd5c58ac0   (3685 kB)
                     .text : 0xd5000000 - 0xd58bf498   (8957 kB)
[    0.346242] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.346393] random: get_random_u32 called from cache_random_seq_create+0x7e/0x110 with crng_init=0
[    0.346670] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.346688] After mm_init
[    0.346690] ftrace: allocating 34238 entries in 67 pages
[    0.373291] After sched_init
[    0.373351] rcu: Hierarchical RCU implementation.
[    0.373352] rcu: 	RCU event tracing is enabled.
[    0.373357] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.373367] After rcu_init
[    0.380615] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
[    0.381182] After add_latent_entropy
[    0.381203] After add_device_randomness
[    0.381207] After boot_init_stack_canary
[    0.383698] Console: colour VGA+ 80x25
[    0.383712] printk: console [tty0] enabled
[    0.383759] ACPI: Core revision 20190509
[    0.384335] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.384355] hpet clockevent registered
[    0.384365] APIC: Switch to symmetric I/O mode setup
[    0.384367] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.384876] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.389436] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x170fe898b51, max_idle_ns: 440795260846 ns
[    0.389447] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.87 BogoMIPS (lpj=1599936)
[    0.389453] pid_max: default: 32768 minimum: 301
[    0.389543] LSM: Security Framework initializing
[    0.389582] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.389590] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.389914] *** VALIDATE proc ***
[    0.390023] *** VALIDATE cgroup1 ***
[    0.390027] *** VALIDATE cgroup2 ***
[    0.390124] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.390126] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
[    0.390133] Spectre V2 : Mitigation: Full AMD retpoline
[    0.390134] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.390136] Speculative Store Bypass: Vulnerable
[    0.390375] Freeing SMP alternatives memory: 32K
[    0.390378] After check_bugs
[    0.390382] After acpi_subsystem_init
[    0.390383] After arch_post_acpi_subsys_init
[    0.390384] After sfi_init_late
[    0.390386] After rcu_scheduler_starting
[    0.390531] After find_task_by_pid_ns
[    0.390534] After numa_default_policy
[    0.390570] After rcu_read_lock
[    0.390571] After rcu_read_unlock
[    0.390577] After kthreadd_done
[    0.391440] random: 1
[    0.391440] random: 2
[    0.391440] random: 3
[    0.391440] random: 4
[    0.410443] random: 1
[    0.410444] random: 2
[    0.410445] random: 3
[    0.410446] random: 4
[    0.474443] random: 1
[    0.474444] random: 2
[    0.474445] random: 3
[    0.474446] random: 4
[    0.492440] smpboot: CPU0: AMD E-350D APU with Radeon(tm) HD Graphics (family: 0x14, model: 0x2, stepping: 0x0)
[    0.492440] Performance Events: AMD PMU driver.
[    0.492440] ... version:                0
[    0.492440] ... bit width:              48
[    0.492440] ... generic registers:      4
[    0.492440] ... value mask:             0000ffffffffffff
[    0.492440] ... max period:             00007fffffffffff
[    0.492440] ... fixed-purpose events:   0
[    0.492440] ... event mask:             000000000000000f
[    0.492440] rcu: Hierarchical SRCU implementation.
[    0.492638] smp: Bringing up secondary CPUs ...
[    0.492897] x86: Booting SMP configuration:
[    0.492900] .... node  #0, CPUs:      #1
[    0.004344] Initializing CPU#1
[    0.493496] After schedule_preempt_disabled
[    0.493518] smp: Brought up 1 node, 2 CPUs
[    0.493518] smpboot: Max logical packages: 1
[    0.493518] smpboot: Total of 2 processors activated (6399.74 BogoMIPS)
[    0.495553] devtmpfs: initialized
[    0.496453] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.496453] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.496453] pinctrl core: initialized pinctrl subsystem
[    0.496453] PM: RTC time: 07:16:03, date: 2019-05-16
[    0.496621] NET: Registered protocol family 16
[    0.497068] audit: initializing netlink subsys (disabled)
[    0.497496] audit: type=2000 audit(1557990963.113:1): state=initialized audit_enabled=0 res=1
[    0.497704] cpuidle: using governor menu
[    0.497748] ACPI: bus type PCI registered
[    0.499017] PCI: Using configuration type 1 for base access
[    0.499019] PCI: Using configuration type 1 for extended access
[    0.499413] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.499414] mtrr: probably your BIOS does not setup all CPUs.
[    0.499415] mtrr: corrected configuration.
[    0.503544] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.504502] alg: self-tests disabled
[    0.506483] cryptd: max_cpu_qlen set to 1000
[    0.508625] ACPI: Added _OSI(Module Device)
[    0.508628] ACPI: Added _OSI(Processor Device)
[    0.508630] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.508632] ACPI: Added _OSI(Processor Aggregator Device)
[    0.508635] ACPI: Added _OSI(Linux-Dell-Video)
[    0.508637] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.508640] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.519774] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.522855] ACPI: Interpreter enabled
[    0.522903] ACPI: (supports S0 S1 S3 S5)
[    0.522906] ACPI: Using IOAPIC for interrupt routing
[    0.522946] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.523371] ACPI: Enabled 19 GPEs in block 00 to 1F
[    0.533361] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.533376] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.533544] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability LTR]
[    0.533986] PCI host bridge to bus 0000:00
[    0.533992] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.533995] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.533999] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.534002] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
[    0.534006] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.534025] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.534305] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000
[    0.534329] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.534339] pci 0000:00:01.0: reg 0x14: [io  0x2000-0x20ff]
[    0.534349] pci 0000:00:01.0: reg 0x18: [mem 0xf0100000-0xf013ffff]
[    0.534381] pci 0000:00:01.0: enabling Extended Tags
[    0.534432] pci 0000:00:01.0: supports D1 D2
[    0.534678] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
[    0.534699] pci 0000:00:01.1: reg 0x10: [mem 0xf0140000-0xf0143fff]
[    0.534741] pci 0000:00:01.1: enabling Extended Tags
[    0.534790] pci 0000:00:01.1: supports D1 D2
[    0.535118] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.535149] pci 0000:00:11.0: reg 0x10: [io  0x2410-0x2417]
[    0.535162] pci 0000:00:11.0: reg 0x14: [io  0x2420-0x2423]
[    0.535175] pci 0000:00:11.0: reg 0x18: [io  0x2418-0x241f]
[    0.535188] pci 0000:00:11.0: reg 0x1c: [io  0x2424-0x2427]
[    0.535201] pci 0000:00:11.0: reg 0x20: [io  0x2400-0x240f]
[    0.535215] pci 0000:00:11.0: reg 0x24: [mem 0xf014b000-0xf014b3ff]
[    0.535565] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.535591] pci 0000:00:12.0: reg 0x10: [mem 0xf0148000-0xf0148fff]
[    0.535961] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.535991] pci 0000:00:12.2: reg 0x10: [mem 0xf014c000-0xf014c0ff]
[    0.536103] pci 0000:00:12.2: supports D1 D2
[    0.536107] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.536109] pci 0000:00:12.2: pme_poll = true
[    0.536111] pci 0000:00:12.2: after device_set_wakeup_capable()
[    0.536117] pci 0000:00:12.2: after pci_pme_active()
[    0.536417] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.536450] pci 0000:00:13.0: reg 0x10: [mem 0xf0149000-0xf0149fff]
[    0.536817] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.536847] pci 0000:00:13.2: reg 0x10: [mem 0xf014d000-0xf014d0ff]
[    0.536959] pci 0000:00:13.2: supports D1 D2
[    0.536962] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.536964] pci 0000:00:13.2: pme_poll = true
[    0.536966] pci 0000:00:13.2: after device_set_wakeup_capable()
[    0.536971] pci 0000:00:13.2: after pci_pme_active()
[    0.537275] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.537661] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.537696] pci 0000:00:14.2: reg 0x10: [mem 0xf0144000-0xf0147fff 64bit]
[    0.537791] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.537793] pci 0000:00:14.2: pme_poll = true
[    0.537795] pci 0000:00:14.2: after device_set_wakeup_capable()
[    0.537801] pci 0000:00:14.2: after pci_pme_active()
[    0.538093] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.538456] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.538812] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.538838] pci 0000:00:14.5: reg 0x10: [mem 0xf014a000-0xf014afff]
[    0.539213] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.539275] pci 0000:00:15.0: enabling Extended Tags
[    0.539350] pci 0000:00:15.0: supports D1 D2
[    0.539704] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    0.539772] pci 0000:00:15.1: enabling Extended Tags
[    0.539848] pci 0000:00:15.1: supports D1 D2
[    0.540175] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.540422] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.540667] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.540907] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.541170] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.541406] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.541653] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.541890] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.542219] pci_bus 0000:01: extended config space not accessible
[    0.542318] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[    0.542333] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.542336] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.542339] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.542342] pci 0000:00:14.4:   bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[    0.542423] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.542552] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.542594] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.542633] pci 0000:03:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.542658] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.542809] pci 0000:03:00.0: supports D1 D2
[    0.542812] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.542814] pci 0000:03:00.0: pme_poll = true
[    0.542816] pci 0000:03:00.0: after device_set_wakeup_capable()
[    0.542823] pci 0000:03:00.0: after pci_pme_active()
[    0.546557] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.546577] pci 0000:00:15.1:   bridge window [io  0x1000-0x1fff]
[    0.546595] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.546639] pci_bus 0000:00: on NUMA node 0
[    0.548235] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.548594] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.548907] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.549220] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.549479] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.549793] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
[    0.550101] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.550479] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
[    0.551500] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.551500] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.551515] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.551518] vgaarb: loaded
[    0.551771] SCSI subsystem initialized
[    0.551852] libata version 3.00 loaded.
[    0.551852] ACPI: bus type USB registered
[    0.551852] usbcore: registered new interface driver usbfs
[    0.551852] usbcore: registered new interface driver hub
[    0.551852] usbcore: registered new device driver usb
[    0.552489] PCI: Using ACPI for IRQ routing
[    0.552493] PCI: pci_cache_line_size set to 64 bytes
[    0.552651] e820: reserve RAM buffer [mem 0xc7d48000-0xc7ffffff]
[    0.552655] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
[    0.552918] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.552918] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.555521] clocksource: Switched to clocksource tsc-early
[    0.586553] VFS: Disk quotas dquot_6.6.0
[    0.586596] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.586673] *** VALIDATE hugetlbfs ***
[    0.586760] pnp: PnP ACPI init
[    0.587567] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.587672] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.587761] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.588359] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.588436] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.588466] pnp: PnP ACPI: found 5 devices
[    0.593653] pci 0000:00:14.4: PCI bridge to [bus 01]
[    0.593745] pci 0000:00:15.0: PCI bridge to [bus 02]
[    0.593760] pci 0000:00:15.1: PCI bridge to [bus 03]
[    0.593766] pci 0000:00:15.1:   bridge window [io  0x1000-0x1fff]
[    0.593777] pci 0000:00:15.1:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.593790] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.593793] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.593796] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.593799] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff]
[    0.593803] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7 window]
[    0.593806] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff window]
[    0.593809] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[    0.593812] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff]
[    0.593815] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.593818] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.594020] NET: Registered protocol family 2
[    0.594347] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.594364] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.594393] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.594430] TCP: Hash tables configured (established 8192 bind 8192)
[    0.594492] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.594505] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.594610] NET: Registered protocol family 1
[    0.594651] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.597742] PCI: CLS 64 bytes, default 64
[    0.597862] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.597866] software IO TLB: mapped [mem 0x2f9fd000-0x339fd000] (64MB)
[    0.598146] LVT offset 0 assigned for vector 0x400
[    0.598202] perf: AMD IBS detected (0x000000ff)
[    0.598809] check: Scanning for low memory corruption every 5 seconds
[    0.600102] Initialise system trusted keyrings
[    0.600357] workingset: timestamp_bits=14 max_order=20 bucket_order=6
[    0.603881] zbud: loaded
[    0.604731] NET: Registered protocol family 38
[    0.604743] Key type asymmetric registered
[    0.604746] Asymmetric key parser 'x509' registered
[    0.604775] bounce: pool size: 64 pages
[    0.604796] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.604930] io scheduler mq-deadline registered
[    0.604934] io scheduler kyber registered
[    0.605910] pcieport 0000:00:15.0: PME: Signaling with IRQ 24
[    0.606592] pcieport 0000:00:15.1: PME: Signaling with IRQ 25
[    0.606848] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.606889] ACPI: Power Button [PWRB]
[    0.606979] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.607001] ACPI: Power Button [PWRF]
[    0.608796] thermal LNXTHERM:00: registered as thermal_zone0
[    0.608801] ACPI: Thermal Zone [TZ00] (45 C)
[    0.609140] initcall serial8250_init blacklisted
[    0.609803] Non-volatile memory driver v1.3
[    0.610114] Linux agpgart interface v0.103
[    0.610803] [drm] radeon kernel modesetting enabled.
[    0.610838] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[    0.610842] radeon 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0100000 -> 0xf013ffff
[    0.610846] radeon 0000:00:01.0: vgaarb: deactivate vga console
[    0.611689] Console: switching to colour dummy device 80x25
[    0.612886] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802 0x00).
[    0.612961] ATOM BIOS: AMD
[    0.613066] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
[    0.613071] radeon 0000:00:01.0: GTT: 1024M 0x0000000018000000 - 0x0000000057FFFFFF
[    0.613079] [drm] Detected VRAM RAM=384M, BAR=256M
[    0.613081] [drm] RAM width 32bits DDR
[    0.613399] [TTM] Zone  kernel: Available graphics memory: 385438 KiB
[    0.613403] [TTM] Zone highmem: Available graphics memory: 1822770 KiB
[    0.613405] [TTM] Initializing pool allocator
[    0.613414] [TTM] Initializing DMA pool allocator
[    0.613453] [drm] radeon: 384M of VRAM memory ready
[    0.613455] [drm] radeon: 1024M of GTT memory ready.
[    0.613477] [drm] Loading PALM Microcode
[    0.613485] [drm] Internal thermal controller without fan control
[    0.613570] [drm] Found smc ucode version: 0x00010601
[    0.613640] [drm] radeon: dpm initialized
[    0.613682] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    0.631373] [drm] GART: Restore entries: num cpu pages 262144, num gpu pages 262144
[    0.636501] [drm] GART: Done restoring entries
[    0.636511] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[    0.636702] radeon 0000:00:01.0: WB enabled
[    0.636710] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0x(ptrval)
[    0.636714] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0x(ptrval)
[    0.637590] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x(ptrval)
[    0.637594] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.637595] [drm] Driver supports precise vblank timestamp query.
[    0.637598] radeon 0000:00:01.0: radeon: MSI limited to 32-bit
[    0.637680] radeon 0000:00:01.0: radeon: using MSI.
[    0.637720] [drm] radeon: irq initialized.
[    0.654339] [drm] ring test on 0 succeeded in 1 usecs
[    0.654348] [drm] ring test on 3 succeeded in 3 usecs
[    0.668410] [drm] ring test on 5 succeeded in 1 usecs
[    0.670429] [drm] UVD initialized successfully.
[    0.670663] [drm] ib test on ring 0 succeeded in 0 usecs
[    0.670721] [drm] ib test on ring 3 succeeded in 0 usecs
[    0.683410] [drm] ib test on ring 5 succeeded
[    0.686143] [drm] Radeon Display Connectors
[    0.686145] [drm] Connector 0:
[    0.686146] [drm]   HDMI-A-1
[    0.686147] [drm]   HPD1
[    0.686151] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    0.686152] [drm]   Encoders:
[    0.686154] [drm]     DFP1: INTERNAL_UNIPHY
[    0.686155] [drm] Connector 1:
[    0.686156] [drm]   HDMI-A-2
[    0.686157] [drm]   HPD2
[    0.686160] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    0.686161] [drm]   Encoders:
[    0.686162] [drm]     DFP2: INTERNAL_UNIPHY
[    0.686163] [drm] Connector 2:
[    0.686164] [drm]   VGA-1
[    0.686167] [drm]   DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[    0.686167] [drm]   Encoders:
[    0.686169] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    0.727331] [drm] fb mappable at 0xE0366000
[    0.727335] [drm] vram apper at 0xE0000000
[    0.727336] [drm] size 5242880
[    0.727337] [drm] fb depth is 24
[    0.727339] [drm]    pitch is 5120
[    0.727749] fbcon: radeondrmfb (fb0) is primary device
[    0.749851] Console: switching to colour frame buffer device 160x64
[    0.760649] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    0.760785] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[    0.761621] ahci 0000:00:11.0: version 3.0
[    0.762391] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.762397] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part 
[    0.764868] scsi host0: ahci
[    0.765529] scsi host1: ahci
[    0.766021] scsi host2: ahci
[    0.766507] scsi host3: ahci
[    0.767039] scsi host4: ahci
[    0.767665] scsi host5: ahci
[    0.767957] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19
[    0.767973] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19
[    0.767977] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19
[    0.767980] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19
[    0.767984] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19
[    0.767987] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19
[    0.768188] libphy: Fixed MDIO Bus: probed
[    0.768261] usbcore: registered new interface driver usbserial_generic
[    0.768273] usbserial: USB Serial support registered for generic
[    0.768325] ata2: SATA link down (SStatus 0 SControl 0)
[    0.768366] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.768497] ata3: SATA link down (SStatus 0 SControl 0)
[    0.768701] ata6: SATA link down (SStatus 0 SControl 0)
[    0.770279] ata4: SATA link down (SStatus 0 SControl 0)
[    0.770338] ata5: SATA link down (SStatus 0 SControl 0)
[    0.772567] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.772597] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.773094] mousedev: PS/2 mouse device common for all mice
[    0.773886] rtc_cmos 00:00: RTC can wake from S4
[    0.774272] rtc_cmos 00:00: registered as rtc0
[    0.774314] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 0)
[    0.774328] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    0.774379] w83627ehf: Found NCT6775F chip at 0x290
[    0.774626] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133
[    0.774630] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 32)
[    0.774899] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.775038] device-mapper: uevent: version 1.0.3
[    0.775146] ata1.00: configured for UDMA/133
[    0.775768] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[    0.775918] hidraw: raw HID events driver (C) Jiri Kosina
[    0.775932] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDSSDP06 0    PQ: 0 ANSI: 5
[    0.776050] usbcore: registered new interface driver usbhid
[    0.776051] usbhid: USB HID core driver
[    0.776415] Initializing XFRM netlink socket
[    0.776671] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.776744] NET: Registered protocol family 10
[    0.777085] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[    0.777215] sd 0:0:0:0: [sda] Write Protect is off
[    0.777221] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.777470] Segment Routing with IPv6
[    0.777539] mip6: Mobile IPv6
[    0.777545] NET: Registered protocol family 17
[    0.777569] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.778176] mce: Using 6 MCE banks
[    0.778214] Using IPI No-Shortcut mode
[    0.778235] sched_clock: Marking stable (774614318, 3344553)->(882101848, -104142977)
[    0.778916]  sda: sda1
[    0.778929] registered taskstats version 1
[    0.778934] Loading compiled-in X.509 certificates
[    0.778998] zswap: loaded using pool lzo/zbud
[    0.779637] PM:   Magic number: 3:655:268
[    0.779697] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.779892] rtc_cmos 00:00: setting system clock to 2019-05-16T07:16:03 UTC (1557990963)
[    0.801697] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.867946] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    0.867990] VFS: Mounted root (ext4 filesystem) on device 8:1.
[    0.868889] random: 1
[    0.868895] random: 2
[    0.868898] random: 3
[    0.868899] random: 4
[    0.868904] random: fast init done
[    0.870164] devtmpfs: mounted
[    0.870199] After kernel_init_freeable
[    0.872355] Freeing unused kernel image memory: 1144K
[    0.875560] Write protecting kernel text and read-only data: 11896k
[    0.875563] NX-protecting the kernel data: 5376k
[    0.876330] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.876331] After mark_readonly
[    0.876338] After pti_finalize
[    0.876339] rcu_end_inkernel_boot
[    0.876342] Run /sbin/init as init process
[    1.191254] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    1.204174] systemd[1]: Detected architecture x86.
[    1.208428] systemd[1]: Set hostname to <kodi>.
[    1.210017] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[    1.417524] systemd[1]: File /lib/systemd/system/systemd-journald.service:11 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    1.417534] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    1.632561] tsc: Refined TSC clocksource calibration: 1600.000 MHz
[    1.632579] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x171024fa93b, max_idle_ns: 440795253189 ns
[    1.632610] clocksource: Switched to clocksource tsc
[    1.647292] random: systemd: uninitialized urandom read (16 bytes read)
[    1.650086] random: systemd: uninitialized urandom read (16 bytes read)
[    1.650134] systemd[1]: Reached target Network.
[    1.650338] random: systemd: uninitialized urandom read (16 bytes read)
[    1.652519] systemd[1]: Created slice system-getty.slice.
[    1.652732] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.653225] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.235797] acpi_cpufreq: overriding BIOS provided _PSD data
[    2.539992] 1
[    2.540018] 2
[    2.540357] 3
[    2.540358] 4
[    2.540358] 5
[    2.540359] 7
[    2.540389] 8
[    2.540389] 9
[    2.540740] 1
[    2.540758] 2
[    2.541120] 3
[    2.541121] 4
[    2.541122] 5
[    2.541122] 7
[    2.541127] 8
[    2.541128] 9
[    2.571595] snd_hda_codec_realtek hdaudioC1D0: ALC892: SKU not ready 0x00000100
[    2.572192] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x16/0x15/0x17/0x0) type:line
[    2.572196] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.572205] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.572208] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    2.572211] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    2.572213] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    2.572218] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    2.572222] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    2.572225] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    2.572227] snd_hda_codec_realtek hdaudioC1D0:      CD=0x1c
[    2.577978] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[    2.615956] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[    2.616105] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[    2.616324] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[    2.617963] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[    2.618186] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[    2.618392] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[    2.619055] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[    2.619210] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
[    2.786284] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.788828] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.790064] ehci-pci: EHCI PCI platform driver
[    2.791011] QUIRK: Enable AMD PLL fix
[    2.791015] QUIRK: Enable AMD PLL fix
[    2.791142] ehci-pci 0000:00:13.2: EHCI Host Controller
[    2.791161] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
[    2.791175] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.791259] ehci-pci 0000:00:13.2: debug port 1
[    2.791349] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014d000
[    2.798393] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.799304] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    2.799309] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.799313] usb usb1: Product: EHCI Host Controller
[    2.799316] usb usb1: Manufacturer: Linux 5.1.0-10952-gd19283a8021c ehci_hcd
[    2.799319] usb usb1: SerialNumber: 0000:00:13.2
[    2.799684] hub 1-0:1.0: USB hub found
[    2.799710] hub 1-0:1.0: 5 ports detected
[    2.801527] ehci-pci 0000:00:12.2: EHCI Host Controller
[    2.801553] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
[    2.801568] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.801655] ehci-pci 0000:00:12.2: debug port 1
[    2.801721] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014c000
[    2.808977] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.809277] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    2.809281] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.809284] usb usb2: Product: EHCI Host Controller
[    2.809288] usb usb2: Manufacturer: Linux 5.1.0-10952-gd19283a8021c ehci_hcd
[    2.809290] usb usb2: SerialNumber: 0000:00:12.2
[    2.809675] hub 2-0:1.0: USB hub found
[    2.809699] hub 2-0:1.0: 5 ports detected
[    2.810550] ohci-pci: OHCI PCI platform driver
[    2.811841] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    2.811860] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 3
[    2.812018] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0149000
[    2.812335] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    2.812362] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 4
[    2.812539] ohci-pci 0000:00:14.5: irq 18, io mem 0xf014a000
[    2.813353] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    2.813370] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[    2.813420] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0148000
[    2.875934] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
[    2.875940] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.875943] usb usb5: Product: OHCI PCI host controller
[    2.875947] usb usb5: Manufacturer: Linux 5.1.0-10952-gd19283a8021c ohci_hcd
[    2.875949] usb usb5: SerialNumber: 0000:00:12.0
[    2.876465] hub 5-0:1.0: USB hub found
[    2.876584] hub 5-0:1.0: 5 ports detected
[    2.877043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
[    2.877046] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.877049] usb usb3: Product: OHCI PCI host controller
[    2.877051] usb usb3: Manufacturer: Linux 5.1.0-10952-gd19283a8021c ohci_hcd
[    2.877054] usb usb3: SerialNumber: 0000:00:13.0
[    2.877298] hub 3-0:1.0: USB hub found
[    2.877319] hub 3-0:1.0: 5 ports detected
[    2.877720] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
[    2.877724] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.877726] usb usb4: Product: OHCI PCI host controller
[    2.877729] usb usb4: Manufacturer: Linux 5.1.0-10952-gd19283a8021c ohci_hcd
[    2.877731] usb usb4: SerialNumber: 0000:00:14.5
[    2.877920] hub 4-0:1.0: USB hub found
[    2.878007] hub 4-0:1.0: 2 ports detected
[    2.892129] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    2.892145] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[    2.892639] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0x8060
[    2.990757] libphy: r8169: probed
[    2.992661] r8169 0000:03:00.0 eth0: RTL8168e/8111e, bc:5f:f4:c8:d3:98, XID 2c2, IRQ 28
[    2.992669] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.294484] usb 5-2: new low-speed USB device number 2 using ohci-pci
[    3.458711] usb 5-2: New USB device found, idVendor=1241, idProduct=1122, bcdDevice= 1.00
[    3.458718] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.485065] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb5/5-2/5-2:1.0/0003:1241:1122.0001/input/input14
[    3.485320] hid-generic 0003:1241:1122.0001: input,hidraw0: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0
[    3.967622] random: crng init done
[    3.967628] random: 7 urandom warning(s) missed due to ratelimiting
[    4.323449] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    4.363774] RTL8211DN Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211DN Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[    4.576887] r8169 0000:03:00.0 enp3s0: Link is Down
[    4.577167] A link change request failed with some changes committed already. Interface enp3s0 may have been left with an inconsistent configuration, please check.
[   16.377520] r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx
[   16.377553] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]

             reply	other threads:[~2019-05-23 11:00 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-23 11:00 Paul Menzel [this message]
2019-05-23 17:44 ` Heiner Kallweit
2019-05-24 15:14   ` Paul Menzel
2019-05-24 17:55     ` Heiner Kallweit
2019-05-24 18:04       ` Joe Perches

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a05b0b6c-505c-db61-96ac-813e68a26cc6@molgen.mpg.de \
    --to=pmenzel@molgen.mpg.de \
    --cc=hkallweit1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nic_swsd@realtek.com \
    --subject='Re: r8169: Link only up after 16 s (A link change request failed with some changes committed already. Interface enp3s0 may have been left with an inconsistent configuration, please check.)' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).