Re: [PATCH i2c-next v9 5/5] i2c: aspeed: Add bus idle waiting logic for multi-master use cases

[Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>]

On 11/1/2018 10:44 AM, kbuild test robot wrote:
> Hi Jae,
> 
> Thank you for the patch! Perhaps something to improve:
> 
> [auto build test WARNING on wsa/i2c/for-next]
> [also build test WARNING on v4.19 next-20181101]
> [if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
> 
> url:    https://github.com/0day-ci/linux/commits/Jae-Hyun-Yoo/dt-bindings-i2c-Add-bus-timeout-ms-and-retries-properties-as-common-optional/20181031-051152
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-next
> config: i386-allyesconfig (attached as .config)
> compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
> reproduce:
>          # save the attached .config to linux build tree
>          make ARCH=i386
> 
> Note: it may well be a FALSE warning. FWIW you are at least aware of it now.
> http://gcc.gnu.org/wiki/Better_Uninitialized_Warnings
> 
> All warnings (new ones prefixed by >>):
> 
>     drivers/i2c/busses/i2c-aspeed.c: In function 'aspeed_i2c_master_xfer':
>>> drivers/i2c/busses/i2c-aspeed.c:624:210: warning: 'timeout' may be used uninitialized in this function [-Wmaybe-uninitialized]
>        if (time_after(jiffies, timeout))
>                                                                                                                                                                                                                       ^
>     drivers/i2c/busses/i2c-aspeed.c:607:16: note: 'timeout' was declared here
>       unsigned long timeout;
>                     ^~~~~~~
> 
> vim +/timeout +624 drivers/i2c/busses/i2c-aspeed.c
> 
>     604	
>     605	static int aspeed_i2c_check_bus_busy(struct aspeed_i2c_bus *bus)
>     606	{
>     607		unsigned long timeout;
>     608	
>     609		if (bus->multi_master) {
>     610			might_sleep();
>     611			/* Initialize it only when multi_master is set */
>     612			timeout = jiffies + bus->adap.timeout;

The 'timeout' variable will be initialized only when bus->multi_master
is true to save some OPs in case this variable isn't used. The saved OPs
are not expensive but it makes a meaning because this function is called
very frequently on every master transfer.

>     613		}
>     614	
>     615		for (;;) {
>     616			if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
>     617			      ASPEED_I2CD_BUS_BUSY_STS))
>     618	#if IS_ENABLED(CONFIG_I2C_SLAVE)
>     619				if (bus->slave_state == ASPEED_I2C_SLAVE_STOP)
>     620	#endif
>     621					return 0;
>     622			if (!bus->multi_master)
>     623				break;

If bus->multi_master is false then it doesn't fall through so the
'timeout' variable in below will not be used when itself is
uninitialized. Also, bus->multi_master is fixed at probing time and it
doesn't change at runtime so the warning case never happens.

-Jae

>   > 624			if (time_after(jiffies, timeout))
>     625				break;
>     626			usleep_range((ASPEED_I2C_BUS_BUSY_CHECK_INTERVAL_US >> 2) + 1,
>     627				     ASPEED_I2C_BUS_BUSY_CHECK_INTERVAL_US);
>     628		}
>     629	
>     630		return aspeed_i2c_recover_bus(bus);
>     631	}
>     632	
> 
> ---
> 0-DAY kernel test infrastructure                Open Source Technology Center
> https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
>