LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: ulf.hansson@linaro.org, khilman@baylibre.com,
	baylibre-upstreaming@groups.io, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/3] mmc: meson-gx: add ddr-access-quirk
Date: Wed, 15 May 2019 14:45:38 +0200	[thread overview]
Message-ID: <a54f7a4a-c280-6181-969f-4979dadb36b2@baylibre.com> (raw)
In-Reply-To: <CAFBinCAMoNDnxoQA9XHKy0Xo9MduxD1CvQXOeLZQ3zZ4ViWm7A@mail.gmail.com>

On 14/05/2019 19:58, Martin Blumenstingl wrote:
> Hi Neil,
> 
> On Mon, May 13, 2019 at 11:16 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
> [...]
>> @@ -1158,15 +1183,27 @@ static int meson_mmc_probe(struct platform_device *pdev)
>>          */
>>         mmc->caps2 &= ~MMC_CAP2_HS400;
>>
>> -       /* data bounce buffer */
>> -       host->bounce_buf_size = mmc->max_req_size;
>> -       host->bounce_buf =
>> -               dma_alloc_coherent(host->dev, host->bounce_buf_size,
>> -                                  &host->bounce_dma_addr, GFP_KERNEL);
>> -       if (host->bounce_buf == NULL) {
>> -               dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
>> -               ret = -ENOMEM;
>> -               goto err_free_irq;
>> +       if (host->ddr_access_quirk) {
>> +               /*
>> +                * The MMC Controller embeds 1,5KiB of internal SRAM
>> +                * that can be used to be used as bounce buffer.
>> +                * In the case of the G12A SDIO controller, use these
>> +                * instead of the DDR memory
>> +                */
>> +               host->bounce_buf_size = SD_EMMC_SRAM_DATA_BUF_LEN;
>> +               host->bounce_buf = host->regs + SD_EMMC_SRAM_DATA_BUF_OFF;
>> +               host->bounce_dma_addr = res->start + SD_EMMC_SRAM_DATA_BUF_OFF;
> I'm curious: why do you need to set bounce_dma_addr in this case?

We still need the physical bounce buffer address since we write in the registers,
and we need the logical address to memcpy() in the buffer.

> 
>> +       } else {
>> +               /* data bounce buffer */
>> +               host->bounce_buf_size = mmc->max_req_size;
>> +               host->bounce_buf =
>> +                       dma_alloc_coherent(host->dev, host->bounce_buf_size,
>> +                                          &host->bounce_dma_addr, GFP_KERNEL);
>> +               if (host->bounce_buf == NULL) {
>> +                       dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
>> +                       ret = -ENOMEM;
>> +                       goto err_free_irq;
>> +               }
>>         }
>>
>>         host->descs = dma_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
> if host->descs cannot be allocated then you need to conditionally skip
> dma_free_coherent for the bounce buffer in the goto err_bounce_buf
> case a few lines below (just like you did in meson_mmc_remove)

It can be allocated, it's only useless. I can skip it but I don't want
to break any logic in the driver.

> 
> 
> Martin
> 


  reply	other threads:[~2019-05-15 12:45 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-13  9:15 [PATCH 0/3] mmc: meson-gx: add ddr-access-quirk support Neil Armstrong
2019-05-13  9:15 ` [PATCH 1/3] dt-bindings: mmc: meson-gx: add ddr-access-quirk property Neil Armstrong
2019-05-14 17:50   ` Martin Blumenstingl
2019-05-15 12:43     ` Neil Armstrong
2019-05-15 11:37   ` Ulf Hansson
2019-05-15 12:43     ` Neil Armstrong
2019-05-13  9:15 ` [PATCH 2/3] mmc: meson-gx: add ddr-access-quirk Neil Armstrong
2019-05-13 17:47   ` Kevin Hilman
2019-05-14 17:58   ` Martin Blumenstingl
2019-05-15 12:45     ` Neil Armstrong [this message]
2019-05-15 21:18       ` Martin Blumenstingl
2019-05-16  9:09         ` Neil Armstrong
2019-05-15 11:34   ` Ulf Hansson
2019-05-15 12:51     ` Neil Armstrong
2019-05-13  9:15 ` [PATCH 3/3] arm64: dts: meson-g12a: add ddr-access-quirk property to SDIO controller Neil Armstrong
2019-05-14 17:51   ` Martin Blumenstingl
2019-05-13  9:58 ` [PATCH 0/3] mmc: meson-gx: add ddr-access-quirk support Jerome Brunet
2019-05-13 11:28   ` Jerome Brunet
2019-05-14  9:14 ` [baylibre-upstreaming] " guillaume La Roque

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a54f7a4a-c280-6181-969f-4979dadb36b2@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=baylibre-upstreaming@groups.io \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=ulf.hansson@linaro.org \
    --subject='Re: [PATCH 2/3] mmc: meson-gx: add ddr-access-quirk' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).