LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Hans Verkuil <hverkuil@xs4all.nl>
To: Ezequiel Garcia <ezequiel@collabora.com>, linux-media@vger.kernel.org
Cc: kernel@collabora.com,
	Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
	Shuah Khan <shuahkh@osg.samsung.com>,
	Pawel Osciak <pawel@osciak.com>,
	Alexandre Courbot <acourbot@chromium.org>,
	Sakari Ailus <sakari.ailus@iki.fi>,
	Brian Starkey <brian.starkey@arm.com>,
	linux-kernel@vger.kernel.org,
	Gustavo Padovan <gustavo.padovan@collabora.com>
Subject: Re: [PATCH v9 12/15] vb2: add out-fence support to QBUF
Date: Mon, 7 May 2018 14:29:59 +0200	[thread overview]
Message-ID: <a77b294f-c235-499d-207f-fd0dff4188f4@xs4all.nl> (raw)
In-Reply-To: <20180504200612.8763-13-ezequiel@collabora.com>

On 04/05/18 22:06, Ezequiel Garcia wrote:
> From: Gustavo Padovan <gustavo.padovan@collabora.com>
> 
> If V4L2_BUF_FLAG_OUT_FENCE flag is present on the QBUF call we create
> an out_fence and send its fd to userspace in the fence_fd field as a
> return arg for the QBUF call.
> 
> The fence is signaled on buffer_done(), when the job on the buffer is
> finished.
> 
> v11: - Return fence_fd to userpace only in the QBUF ioctl.
>      - Rework implementation to avoid storing the sync_file
>        as state, which is not really needed.
> 
> v10: - use -EIO for fence error (Hans Verkuil)
>      - add comment around fence context creation (Hans Verkuil)
> 
> v9: - remove in-fences changes from this patch (Alex Courbot)
>     - improve fence context creation (Hans Verkuil)
>     - clean up out fences if vb2_core_qbuf() fails (Hans Verkuil)
> 
> v8: - return 0 as fence_fd if OUT_FENCE flag not used (Mauro)
>     - fix crash when checking not using fences in vb2_buffer_done()
> 
> v7: - merge patch that add the infrastructure to out-fences into
>       this one (Alex Courbot)
>     - Do not install the fd if there is no fence. (Alex Courbot)
>     - do not report error on requeueing, just WARN_ON_ONCE() (Hans)
> 
> v6: - get rid of the V4L2_EVENT_OUT_FENCE event. We always keep the
>       ordering in vb2 for queueing in the driver, so the event is not
>       necessary anymore and the out_fence_fd is sent back to userspace
>       on QBUF call return arg
>     - do not allow requeueing with out-fences, instead mark the buffer
>       with an error and wake up to userspace.
>     - send the out_fence_fd back to userspace on the fence_fd field
> 
> v5: - delay fd_install to DQ_EVENT (Hans)
>     - if queue is fully ordered send OUT_FENCE event right away
>       (Brian)
>     - rename 'q->ordered' to 'q->ordered_in_driver'
>     - merge change to implement OUT_FENCE event here
> 
> v4: - return the out_fence_fd in the BUF_QUEUED event(Hans)
> 
> v3: - add WARN_ON_ONCE(q->ordered) on requeueing (Hans)
>     - set the OUT_FENCE flag if there is a fence pending (Hans)
>     - call fd_install() after vb2_core_qbuf() (Hans)
>     - clean up fence if vb2_core_qbuf() fails (Hans)
>     - add list to store sync_file and fence for the next queued buffer
> 
> v2: check if the queue is ordered.
> 
> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
> ---
>  drivers/media/common/videobuf2/videobuf2-core.c | 95 +++++++++++++++++++++++--
>  drivers/media/common/videobuf2/videobuf2-v4l2.c | 22 +++++-
>  drivers/media/dvb-core/dvb_vb2.c                |  2 +-
>  include/media/videobuf2-core.h                  | 16 ++++-
>  4 files changed, 127 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/media/common/videobuf2/videobuf2-core.c b/drivers/media/common/videobuf2/videobuf2-core.c
> index 996b99497a98..0f7306a04db7 100644
> --- a/drivers/media/common/videobuf2/videobuf2-core.c
> +++ b/drivers/media/common/videobuf2/videobuf2-core.c
> @@ -25,6 +25,7 @@
>  #include <linux/sched.h>
>  #include <linux/freezer.h>
>  #include <linux/kthread.h>
> +#include <linux/sync_file.h>
>  
>  #include <media/videobuf2-core.h>
>  #include <media/v4l2-mc.h>
> @@ -357,6 +358,7 @@ static int __vb2_queue_alloc(struct vb2_queue *q, enum vb2_memory memory,
>  			vb->planes[plane].length = plane_sizes[plane];
>  			vb->planes[plane].min_length = plane_sizes[plane];
>  		}
> +		vb->out_fence_fd = -1;
>  		q->bufs[vb->index] = vb;
>  
>  		/* Allocate video buffer memory for the MMAP type */
> @@ -948,10 +950,22 @@ static void vb2_process_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state
>  	case VB2_BUF_STATE_QUEUED:
>  		return;
>  	case VB2_BUF_STATE_REQUEUEING:

Off-topic: I really need to take a good look at this requeueing thing. It's
a pain for both fences and request API, and it is only used in the cobalt driver,
although I know of another out-of-tree driver that uses it as well.

I wonder if I should just get rid of this state.

> +		/* Requeuing with explicit synchronization, spit warning */
> +		WARN_ON_ONCE(vb->out_fence);
> +
>  		if (q->start_streaming_called)
>  			__enqueue_in_driver(vb);
>  		return;
>  	default:
> +		if (vb->out_fence) {
> +			if (state == VB2_BUF_STATE_ERROR)
> +				dma_fence_set_error(vb->out_fence, -EIO);
> +			dma_fence_signal(vb->out_fence);
> +			dma_fence_put(vb->out_fence);
> +			vb->out_fence = NULL;
> +			vb->out_fence_fd = -1;
> +		}
> +
>  		/* Inform any processes that may be waiting for buffers */
>  		wake_up(&q->done_wq);
>  		break;
> @@ -1367,6 +1381,68 @@ int vb2_core_prepare_buf(struct vb2_queue *q, unsigned int index, void *pb)
>  }
>  EXPORT_SYMBOL_GPL(vb2_core_prepare_buf);
>  
> +static inline const char *vb2_fence_get_driver_name(struct dma_fence *fence)
> +{
> +	return "vb2_fence";
> +}
> +
> +static inline const char *vb2_fence_get_timeline_name(struct dma_fence *fence)
> +{
> +	return "vb2_fence_timeline";
> +}
> +
> +static inline bool vb2_fence_enable_signaling(struct dma_fence *fence)
> +{
> +	return true;
> +}
> +
> +static const struct dma_fence_ops vb2_fence_ops = {
> +	.get_driver_name = vb2_fence_get_driver_name,
> +	.get_timeline_name = vb2_fence_get_timeline_name,
> +	.enable_signaling = vb2_fence_enable_signaling,
> +	.wait = dma_fence_default_wait,
> +};
> +
> +static int vb2_setup_out_fence(struct vb2_queue *q, struct vb2_buffer *vb)
> +{
> +	struct sync_file *sync_file;
> +	int ret;
> +
> +	vb->out_fence_fd = get_unused_fd_flags(O_CLOEXEC);
> +
> +	/*
> +	 * The same context can be used only if the queue is ordered,
> +	 * so if the queue is ordered create one when the queueing start,
> +	 * otherwise create one for every buffer
> +	 */
> +	if (q->unordered || !q->queueing_started)
> +		q->out_fence_context = dma_fence_context_alloc(1);
> +
> +	vb->out_fence = kzalloc(sizeof(*vb->out_fence), GFP_KERNEL);
> +	if (!vb->out_fence) {
> +		ret = -ENOMEM;
> +		goto err_put_fd;
> +	}
> +	dma_fence_init(vb->out_fence, &vb2_fence_ops, &q->out_fence_lock,
> +		       q->out_fence_context, 1);
> +
> +	sync_file = sync_file_create(vb->out_fence);
> +	if (!sync_file) {
> +		ret = -ENOMEM;
> +		goto err_free_fence;
> +	}
> +	fd_install(vb->out_fence_fd, sync_file->file);
> +	return 0;
> +
> +err_free_fence:
> +	dma_fence_put(vb->out_fence);
> +	vb->out_fence = NULL;
> +err_put_fd:
> +	put_unused_fd(vb->out_fence_fd);
> +	vb->out_fence_fd = -1;
> +	return ret;
> +}
> +
>  /*
>   * vb2_start_streaming() - Attempt to start streaming.
>   * @q:		videobuf2 queue
> @@ -1463,7 +1539,7 @@ static void vb2_qbuf_fence_cb(struct dma_fence *f, struct dma_fence_cb *cb)
>  }
>  
>  int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb,
> -		  struct dma_fence *in_fence)
> +		  struct dma_fence *in_fence, bool out_fence)
>  {
>  	struct vb2_buffer *vb;
>  	unsigned long flags;
> @@ -1496,6 +1572,7 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb,
>  	list_add_tail(&vb->queued_entry, &q->queued_list);
>  	q->queued_count++;
>  	q->waiting_for_buffers = false;
> +	q->queueing_started = 1;
>  	vb->state = VB2_BUF_STATE_QUEUED;
>  	vb->in_fence = in_fence;
>  
> @@ -1555,6 +1632,14 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb,
>  
>  	spin_unlock_irqrestore(&vb->fence_cb_lock, flags);
>  
> +	if (out_fence) {
> +		ret = vb2_setup_out_fence(q, vb);
> +		if (ret) {
> +			dprintk(1, "failed to set up out-fence\n");
> +			goto err;
> +		}
> +	}
> +
>  	/* Fill buffer information for the userspace */
>  	if (pb)
>  		call_void_bufop(q, fill_user_buffer, vb, pb);
> @@ -1818,6 +1903,7 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
>  	q->start_streaming_called = 0;
>  	q->queued_count = 0;
>  	q->error = 0;
> +	q->queueing_started = 0;
>  
>  	list_for_each_entry(vb, &q->queued_list, queued_entry) {
>  		spin_lock_irqsave(&vb->fence_cb_lock, flags);
> @@ -2170,6 +2256,7 @@ int vb2_core_queue_init(struct vb2_queue *q)
>  	spin_lock_init(&q->done_lock);
>  	mutex_init(&q->mmap_lock);
>  	init_waitqueue_head(&q->done_wq);
> +	spin_lock_init(&q->out_fence_lock);
>  
>  	q->memory = VB2_MEMORY_UNKNOWN;
>  
> @@ -2421,7 +2508,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
>  		 * Queue all buffers.
>  		 */
>  		for (i = 0; i < q->num_buffers; i++) {
> -			ret = vb2_core_qbuf(q, i, NULL, NULL);
> +			ret = vb2_core_qbuf(q, i, NULL, NULL, false);
>  			if (ret)
>  				goto err_reqbufs;
>  			fileio->bufs[i].queued = 1;
> @@ -2600,7 +2687,7 @@ static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_
>  
>  		if (copy_timestamp)
>  			b->timestamp = ktime_get_ns();
> -		ret = vb2_core_qbuf(q, index, NULL, NULL);
> +		ret = vb2_core_qbuf(q, index, NULL, NULL, false);
>  		dprintk(5, "vb2_dbuf result: %d\n", ret);
>  		if (ret)
>  			return ret;
> @@ -2703,7 +2790,7 @@ static int vb2_thread(void *data)
>  		if (copy_timestamp)
>  			vb->timestamp = ktime_get_ns();
>  		if (!threadio->stop)
> -			ret = vb2_core_qbuf(q, vb->index, NULL, NULL);
> +			ret = vb2_core_qbuf(q, vb->index, NULL, NULL, false);
>  		call_void_qop(q, wait_prepare, q);
>  		if (ret || threadio->stop)
>  			break;
> diff --git a/drivers/media/common/videobuf2/videobuf2-v4l2.c b/drivers/media/common/videobuf2/videobuf2-v4l2.c
> index 74d7062e5285..41a88839683e 100644
> --- a/drivers/media/common/videobuf2/videobuf2-v4l2.c
> +++ b/drivers/media/common/videobuf2/videobuf2-v4l2.c
> @@ -217,7 +217,11 @@ static void __fill_v4l2_buffer(struct vb2_buffer *vb, void *pb)
>  	b->sequence = vbuf->sequence;
>  	b->reserved = 0;
>  
> -	b->fence_fd = 0;
> +	if (b->flags & V4L2_BUF_FLAG_OUT_FENCE)
> +		b->fence_fd = vb->out_fence_fd;
> +	else
> +		b->fence_fd = 0;
> +
>  	if (vb->in_fence)
>  		b->flags |= V4L2_BUF_FLAG_IN_FENCE;
>  	else
> @@ -496,6 +500,13 @@ int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b)
>  	ret = __verify_planes_array(vb, b);
>  	if (!ret)
>  		vb2_core_querybuf(q, b->index, b);
> +
> +	/*
> +	 * Can't return a fence fd, because it only
> +	 * makes sense on the process that queued the buffer.
> +	 */
> +	if (b->flags & (V4L2_BUF_FLAG_IN_FENCE | V4L2_BUF_FLAG_OUT_FENCE))
> +		b->fence_fd = -1;
>  	return ret;
>  }
>  EXPORT_SYMBOL(vb2_querybuf);
> @@ -600,7 +611,8 @@ int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b)
>  		}
>  	}
>  
> -	return vb2_core_qbuf(q, b->index, b, in_fence);
> +	return vb2_core_qbuf(q, b->index, b, in_fence,
> +			     b->flags & V4L2_BUF_FLAG_OUT_FENCE);
>  }
>  EXPORT_SYMBOL_GPL(vb2_qbuf);
>  
> @@ -626,6 +638,12 @@ int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking)
>  	 */
>  	b->flags &= ~V4L2_BUF_FLAG_DONE;
>  
> +	/*
> +	 * Can't return a fence fd, because it only
> +	 * makes sense on the process that queued the buffer.

I'd rephrase this:

"it only makes sense for VIDIOC_QBUF."

It's not really related to the process.

> +	 */
> +	if (b->flags & (V4L2_BUF_FLAG_IN_FENCE | V4L2_BUF_FLAG_OUT_FENCE))
> +		b->fence_fd = -1;

Why not put this code in __fill_v4l2_buffer() and instead set b->fence_fd
in vb2_qbuf, since that's the only place that can return a valid out-fence.

>  	return ret;
>  }
>  EXPORT_SYMBOL_GPL(vb2_dqbuf);
> diff --git a/drivers/media/dvb-core/dvb_vb2.c b/drivers/media/dvb-core/dvb_vb2.c
> index 7da53f10db1a..053803c9ff45 100644
> --- a/drivers/media/dvb-core/dvb_vb2.c
> +++ b/drivers/media/dvb-core/dvb_vb2.c
> @@ -385,7 +385,7 @@ int dvb_vb2_qbuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b)
>  {
>  	int ret;
>  
> -	ret = vb2_core_qbuf(&ctx->vb_q, b->index, b, NULL);
> +	ret = vb2_core_qbuf(&ctx->vb_q, b->index, b, NULL, false);
>  	if (ret) {
>  		dprintk(1, "[%s] index=%d errno=%d\n", ctx->name,
>  			b->index, ret);
> diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
> index 28ce8f66882e..794140fcb5cf 100644
> --- a/include/media/videobuf2-core.h
> +++ b/include/media/videobuf2-core.h
> @@ -260,6 +260,9 @@ struct vb2_buffer {
>  	 *			using the buffer (queueing to the driver)
>  	 * fence_cb:		fence callback information
>  	 * fence_cb_lock:	protect callback signal/remove
> +	 * out_fence_fd:	the out_fence_fd to be shared with userspace.
> +	 * out_fence:		the out-fence associated with the buffer once
> +	 *			it is queued to the driver.
>  	 */
>  	enum vb2_buffer_state	state;
>  
> @@ -271,6 +274,9 @@ struct vb2_buffer {
>  	struct dma_fence_cb	fence_cb;
>  	spinlock_t              fence_cb_lock;
>  
> +	int			out_fence_fd;
> +	struct dma_fence	*out_fence;
> +
>  #ifdef CONFIG_VIDEO_ADV_DEBUG
>  	/*
>  	 * Counters for how often these buffer-related ops are
> @@ -533,6 +539,9 @@ struct vb2_buf_ops {
>   * @last_buffer_dequeued: used in poll() and DQBUF to immediately return if the
>   *		last decoded buffer was already dequeued. Set for capture queues
>   *		when a buffer with the %V4L2_BUF_FLAG_LAST is dequeued.
> + * @queueing_started: if queueing has started. Currently used to determine
> + *		if an out_fence_context is needed.
> + * @out_fence_context: the fence context for the out fences
>   * @fileio:	file io emulator internal data, used only if emulator is active
>   * @threadio:	thread io internal data, used only if thread is active
>   */
> @@ -586,6 +595,10 @@ struct vb2_queue {
>  	unsigned int			is_output:1;
>  	unsigned int			copy_timestamp:1;
>  	unsigned int			last_buffer_dequeued:1;
> +	unsigned int			queueing_started:1;
> +
> +	u64				out_fence_context;
> +	spinlock_t			out_fence_lock;
>  
>  	struct vb2_fileio_data		*fileio;
>  	struct vb2_threadio_data	*threadio;
> @@ -784,6 +797,7 @@ int vb2_core_prepare_buf(struct vb2_queue *q, unsigned int index, void *pb);
>   * @pb:		buffer structure passed from userspace to
>   *		v4l2_ioctl_ops->vidioc_qbuf handler in driver
>   * @in_fence:	in-fence to wait on before queueing the buffer
> + * @out_fence:	create an out-fence as a part of the queue operation
>   *
>   * Videobuf2 core helper to implement VIDIOC_QBUF() operation. It is called
>   * internally by VB2 by an API-specific handler, like ``videobuf2-v4l2.h``.
> @@ -799,7 +813,7 @@ int vb2_core_prepare_buf(struct vb2_queue *q, unsigned int index, void *pb);
>   * Return: returns zero on success; an error code otherwise.
>   */
>  int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb,
> -		  struct dma_fence *in_fence);
> +		  struct dma_fence *in_fence, bool out_fence);
>  
>  /**
>   * vb2_core_dqbuf() - Dequeue a buffer to the userspace
> 

Regards,

	Hans

  reply	other threads:[~2018-05-07 12:30 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-04 20:05 [PATCH v9 00/15] V4L2 Explicit Synchronization Ezequiel Garcia
2018-05-04 20:05 ` [PATCH v9 01/15] xilinx: regroup caps on querycap Ezequiel Garcia
2018-05-04 20:05 ` [PATCH v9 02/15] hackrf: group device capabilities Ezequiel Garcia
2018-05-04 20:06 ` [PATCH v9 03/15] omap3isp: " Ezequiel Garcia
2018-05-04 20:06 ` [PATCH v9 04/15] vb2: move vb2_ops functions to videobuf2-core.[ch] Ezequiel Garcia
2018-05-04 20:06 ` [PATCH v9 05/15] vb2: add unordered vb2_queue property for drivers Ezequiel Garcia
2018-05-07 11:03   ` Hans Verkuil
2018-05-04 20:06 ` [PATCH v9 06/15] v4l: add unordered flag to format description ioctl Ezequiel Garcia
2018-05-04 20:06 ` [PATCH v9 07/15] v4l: mark unordered formats Ezequiel Garcia
2018-05-07 13:45   ` Hans Verkuil
2018-05-04 20:06 ` [PATCH v9 08/15] cobalt: set queue as unordered Ezequiel Garcia
2018-05-07 11:04   ` Hans Verkuil
2018-05-04 20:06 ` [PATCH v9 09/15] vb2: mark codec drivers " Ezequiel Garcia
2018-05-07 11:02   ` Hans Verkuil
2018-05-04 20:06 ` [PATCH v9 10/15] vb2: add explicit fence user API Ezequiel Garcia
2018-05-07 11:30   ` Hans Verkuil
2018-05-09 10:33   ` Brian Starkey
2018-05-09 15:52     ` Ezequiel Garcia
2018-05-09 16:33       ` Brian Starkey
2018-05-09 19:10         ` Ezequiel Garcia
2018-05-09 19:40         ` Ezequiel Garcia
2018-05-04 20:06 ` [PATCH v9 11/15] vb2: add in-fence support to QBUF Ezequiel Garcia
2018-05-07 12:07   ` Hans Verkuil
2018-05-08 19:16     ` Ezequiel Garcia
2018-05-09  7:04       ` Hans Verkuil
2018-05-08 23:18     ` Gustavo Padovan
2018-05-09 10:35       ` Brian Starkey
2018-05-09 10:36   ` Brian Starkey
2018-05-09 10:52     ` Hans Verkuil
2018-05-09 16:03     ` Ezequiel Garcia
2018-05-09 16:45       ` Brian Starkey
2018-05-04 20:06 ` [PATCH v9 12/15] vb2: add out-fence " Ezequiel Garcia
2018-05-07 12:29   ` Hans Verkuil [this message]
2018-05-09 10:37   ` Brian Starkey
2018-05-04 20:06 ` [PATCH v9 13/15] v4l: introduce the fences capability Ezequiel Garcia
2018-05-04 20:06 ` [PATCH v9 14/15] v4l: Add V4L2_CAP_FENCES to drivers Ezequiel Garcia
2018-05-07 12:42   ` Hans Verkuil
2018-05-04 20:06 ` [PATCH v9 15/15] v4l: Document explicit synchronization behavior Ezequiel Garcia
2018-05-07 12:51   ` Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a77b294f-c235-499d-207f-fd0dff4188f4@xs4all.nl \
    --to=hverkuil@xs4all.nl \
    --cc=acourbot@chromium.org \
    --cc=brian.starkey@arm.com \
    --cc=ezequiel@collabora.com \
    --cc=gustavo.padovan@collabora.com \
    --cc=kernel@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@osg.samsung.com \
    --cc=pawel@osciak.com \
    --cc=sakari.ailus@iki.fi \
    --cc=shuahkh@osg.samsung.com \
    --subject='Re: [PATCH v9 12/15] vb2: add out-fence support to QBUF' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).