LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Michal Simek <michal.simek@xilinx.com>
To: linux-kernel@vger.kernel.org, monstr@monstr.eu,
	michal.simek@xilinx.com, git@xilinx.com, maz@kernel.org
Cc: Stefan Asserhall <stefan.asserhall@xilinx.com>,
	Jason Cooper <jason@lakedaemon.net>,
	Mubin Sayyed <mubinusm@xilinx.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/2] irqchip: xilinx: Enable generic irq multi handler
Date: Mon, 24 Feb 2020 13:05:14 +0100	[thread overview]
Message-ID: <a7a2b3c2df5534dd17844472a0a3fbcffb58b133.1582545908.git.michal.simek@xilinx.com> (raw)
In-Reply-To: <cover.1582545908.git.michal.simek@xilinx.com>

Register default arch handler via driver instead of directly pointing to
xilinx intc controller. This patch makes architecture code more generic.

Driver calls generic domain specific irq handler which does the most of
things self. Also get rid of concurrent_irq counting which hasn't been
exported anywhere.
Based on this loop was also optimized by using do/while loop instead of
goto loop.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Stefan Asserhall <stefan.asserhall@xilinx.com>

---

Changes in v2:
- Merge generic irq multi handler(v1 2/3) and domain irq patch (v1 3/3) from together
- Add likely() suggested by Marc

 arch/microblaze/Kconfig           |  2 ++
 arch/microblaze/include/asm/irq.h |  3 ---
 arch/microblaze/kernel/irq.c      | 21 +------------------
 drivers/irqchip/irq-xilinx-intc.c | 34 ++++++++++++++++++-------------
 4 files changed, 23 insertions(+), 37 deletions(-)

diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 6a331bd57ea8..242f58ec086b 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -47,6 +47,8 @@ config MICROBLAZE
 	select CPU_NO_EFFICIENT_FFS
 	select MMU_GATHER_NO_RANGE if MMU
 	select SPARSE_IRQ
+	select GENERIC_IRQ_MULTI_HANDLER
+	select HANDLE_DOMAIN_IRQ
 
 # Endianness selection
 choice
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index eac2fb4b3fb9..5166f0893e2b 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -14,7 +14,4 @@
 struct pt_regs;
 extern void do_IRQ(struct pt_regs *regs);
 
-/* should be defined in each interrupt controller driver */
-extern unsigned int xintc_get_irq(void);
-
 #endif /* _ASM_MICROBLAZE_IRQ_H */
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index 903dad822fad..0b37dde60a1e 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -20,29 +20,10 @@
 #include <linux/irqchip.h>
 #include <linux/of_irq.h>
 
-static u32 concurrent_irq;
-
 void __irq_entry do_IRQ(struct pt_regs *regs)
 {
-	unsigned int irq;
-	struct pt_regs *old_regs = set_irq_regs(regs);
 	trace_hardirqs_off();
-
-	irq_enter();
-	irq = xintc_get_irq();
-next_irq:
-	BUG_ON(!irq);
-	generic_handle_irq(irq);
-
-	irq = xintc_get_irq();
-	if (irq != -1U) {
-		pr_debug("next irq: %d\n", irq);
-		++concurrent_irq;
-		goto next_irq;
-	}
-
-	irq_exit();
-	set_irq_regs(old_regs);
+	handle_arch_irq(regs);
 	trace_hardirqs_on();
 }
 
diff --git a/drivers/irqchip/irq-xilinx-intc.c b/drivers/irqchip/irq-xilinx-intc.c
index cf1bb470d7b5..2de573ee9764 100644
--- a/drivers/irqchip/irq-xilinx-intc.c
+++ b/drivers/irqchip/irq-xilinx-intc.c
@@ -125,20 +125,6 @@ static unsigned int xintc_get_irq_local(struct xintc_irq_chip *irqc)
 	return irq;
 }
 
-unsigned int xintc_get_irq(void)
-{
-	u32 hwirq;
-	unsigned int irq = -1;
-
-	hwirq = xintc_read(primary_intc, IVR);
-	if (hwirq != -1U)
-		irq = irq_find_mapping(primary_intc->root_domain, hwirq);
-
-	pr_debug("irq-xilinx: hwirq=%d, irq=%d\n", hwirq, irq);
-
-	return irq;
-}
-
 static int xintc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
 {
 	struct xintc_irq_chip *irqc = d->host_data;
@@ -178,6 +164,25 @@ static void xil_intc_irq_handler(struct irq_desc *desc)
 	chained_irq_exit(chip, desc);
 }
 
+static void xil_intc_handle_irq(struct pt_regs *regs)
+{
+	u32 hwirq;
+	struct xintc_irq_chip *irqc = primary_intc;
+
+	do {
+		hwirq = xintc_read(irqc, IVR);
+		if (likely(hwirq != -1U)) {
+			int ret;
+
+			ret = handle_domain_irq(irqc->root_domain, hwirq, regs);
+			WARN_ONCE(ret, "Unhandled HWIRQ %d\n", hwirq);
+			continue;
+		}
+
+		break;
+	} while (1);
+}
+
 static int __init xilinx_intc_of_init(struct device_node *intc,
 					     struct device_node *parent)
 {
@@ -248,6 +253,7 @@ static int __init xilinx_intc_of_init(struct device_node *intc,
 	} else {
 		primary_intc = irqc;
 		irq_set_default_host(primary_intc->root_domain);
+		set_handle_irq(xil_intc_handle_irq);
 	}
 
 	return 0;
-- 
2.25.1


  parent reply	other threads:[~2020-02-24 12:05 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-24 12:05 [PATCH v2 0/2] irqchip: xilinx: Switch to generic domain handler Michal Simek
2020-02-24 12:05 ` [PATCH v2 1/2] irqchip: xilinx: Fill error code when irq domain registration fails Michal Simek
2020-02-24 12:05 ` Michal Simek [this message]
2020-03-08 14:01 ` [PATCH v2 0/2] irqchip: xilinx: Switch to generic domain handler Marc Zyngier
2020-03-08 14:32   ` Marc Zyngier
2020-03-09  8:20     ` Michal Simek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a7a2b3c2df5534dd17844472a0a3fbcffb58b133.1582545908.git.michal.simek@xilinx.com \
    --to=michal.simek@xilinx.com \
    --cc=git@xilinx.com \
    --cc=jason@lakedaemon.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=monstr@monstr.eu \
    --cc=mubinusm@xilinx.com \
    --cc=stefan.asserhall@xilinx.com \
    --cc=tglx@linutronix.de \
    --subject='Re: [PATCH v2 2/2] irqchip: xilinx: Enable generic irq multi handler' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).