LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	linux-kernel@vger.kernel.org,
	Mathias Nyman <mathias.nyman@intel.com>
Cc: linux-usb@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	bcm-kernel-feedback-list@broadcom.com, f.fainelli@gmail.com,
	gregkh@linuxfoundation.org, tim.gover@raspberrypi.org,
	linux-pci@vger.kernel.org, wahrenst@gmx.net
Subject: Re: [PATCH v4 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk
Date: Sat, 7 Mar 2020 12:54:27 +0300	[thread overview]
Message-ID: <b4fb58f0-6d51-657b-bcf6-5f4b0c798312@cogentembedded.com> (raw)
In-Reply-To: <20200306114348.5172-5-nsaenzjulienne@suse.de>

Hello!

On 06.03.2020 14:43, Nicolas Saenz Julienne wrote:

> On the Raspberry Pi 4, after a PCI reset, VL805's firmware may either be
> loaded directly from an EEPROM or, if not present, by the SoC's
> VideCore. Inform VideCore that VL805 was just reset.
> 
> Also, as this creates a dependency between XHCI_PCI and VideoCore's
> firmware interface, reflect that on the firmware interface Kconfg.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> ---
> 
> Changes since v3:
>   - Add more complete error message.
>   - Add braces around if statement
> 
> Changes since v1:
>   - Make RASPBERRYPI_FIRMWARE dependent on this quirk to make sure it
>     gets compiled when needed.
> 
>   drivers/firmware/Kconfig      |  1 +
>   drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
>   2 files changed, 17 insertions(+)
[...]
> diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
> index beb2efa71341..452f5f12b042 100644
> --- a/drivers/usb/host/pci-quirks.c
> +++ b/drivers/usb/host/pci-quirks.c
> @@ -16,6 +16,9 @@
>   #include <linux/export.h>
>   #include <linux/acpi.h>
>   #include <linux/dmi.h>
> +
> +#include <soc/bcm2835/raspberrypi-firmware.h>
> +
>   #include "pci-quirks.h"
>   #include "xhci-ext-caps.h"
>   
> @@ -1243,11 +1246,24 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev)
>   
>   static void quirk_usb_early_handoff(struct pci_dev *pdev)
>   {
> +	int ret;
> +
>   	/* Skip Netlogic mips SoC's internal PCI USB controller.
>   	 * This device does not need/support EHCI/OHCI handoff
>   	 */
>   	if (pdev->vendor == 0x184e)	/* vendor Netlogic */
>   		return;
> +
> +	if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
> +		ret = rpi_firmware_init_vl805(pdev);
> +		if (ret) {
> +			/* Firmware might be outdated, or something failed */
> +			dev_warn(&pdev->dev, "Failed to load VL805's firmware: %d\n", ret);
> +			dev_warn(&pdev->dev, "Will continue to attempt to work, "
> +				 "but bad things might happen. You should fix this...\n");

    Don't break up the long kernel messages (checkpatch.pl should not complain 
about them).

[...]

MBR, Sergei

  reply	other threads:[~2020-03-07  9:55 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-06 11:43 [PATCH v4 0/4] " Nicolas Saenz Julienne
2020-03-06 11:43 ` [PATCH v4 1/4] soc: bcm2835: Sync xHCI reset firmware property with downstream Nicolas Saenz Julienne
2020-03-06 11:43 ` [PATCH v4 2/4] firmware: raspberrypi: Introduce vl805 init routine Nicolas Saenz Julienne
2020-03-06 11:43 ` [PATCH v4 3/4] PCI: brcmstb: Wait for Raspberry Pi's firmware when present Nicolas Saenz Julienne
2020-03-07  9:55   ` Sergei Shtylyov
2020-03-09 10:55     ` Nicolas Saenz Julienne
2020-03-06 11:43 ` [PATCH v4 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk Nicolas Saenz Julienne
2020-03-07  9:54   ` Sergei Shtylyov [this message]
2020-03-09 11:09     ` Nicolas Saenz Julienne

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b4fb58f0-6d51-657b-bcf6-5f4b0c798312@cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=f.fainelli@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=nsaenzjulienne@suse.de \
    --cc=tim.gover@raspberrypi.org \
    --cc=wahrenst@gmx.net \
    --subject='Re: [PATCH v4 4/4] USB: pci-quirks: Add Raspberry Pi 4 quirk' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).