LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* Re: Linux v2.6.20-rc5
@ 2007-01-14 11:03 Jeff Chua
  2007-01-14 12:56 ` Adrian Bunk
  0 siblings, 1 reply; 18+ messages in thread
From: Jeff Chua @ 2007-01-14 11:03 UTC (permalink / raw)
  To: Adrian Bunk; +Cc: Linux Kernel, Jan Engelhardt, Andrew Morton, Linus Torvalds


On 1/14/07, Adrian Bunk <bunk@stusta.de> wrote:
> On Sun, Jan 14, 2007 at 03:38:24PM +0800, Jeff Chua wrote:
> >
> > setting CONFIG_PARAVIRT=y will return in ...
> >
> >       vmmon.ko module unknown symbol paravirt_ops
> >
> Please send the 2.6.20-rc5 .config you saw this with.

Adrian,


Only difference is (without CONFIG_PARAVIRT) ...

< CONFIG_PARAVIRT=y
---
> # CONFIG_PARAVIRT is not set


Thanks,
Jeff.


Here's my .config ...


#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc5
# Sat Jan 13 14:45:19 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
CONFIG_PARAVIRT=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/sda3"
CONFIG_SUSPEND_SMP=y

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_IBM=y
# CONFIG_ACPI_IBM_DOCK is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y

#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
CONFIG_PCI_GODIRECT=y
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_DIRECT=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCIEAER=y
# CONFIG_PCI_MSI is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
CONFIG_NF_CONNTRACK_ENABLED=y
CONFIG_NF_CONNTRACK_SUPPORT=y
# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_SCTP=y
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=y
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_IPRANGE=y
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_FTP=y
# CONFIG_NF_NAT_IRC is not set
CONFIG_NF_NAT_TFTP=y
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
# CONFIG_IP_NF_ARP_MANGLE is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=y

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
# CONFIG_IRNET is not set
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# Old SIR device drivers
#

#
# Old Serial dongle support
#

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
CONFIG_NSC_FIR=m
# CONFIG_WINBOND_FIR is not set
CONFIG_TOSHIBA_FIR=m
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
# CONFIG_IEEE80211_SOFTMAC is not set
CONFIG_WIRELESS_EXT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=20480
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_MSI_LAPTOP is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INTEL_COMBINED=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
# CONFIG_IEEE1394_EXPORT_FULL_API is not set

#
# Device Drivers
#

#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=m

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
# CONFIG_PHYLIB is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
CONFIG_NET_ISA=y
# CONFIG_E2100 is not set
# CONFIG_EWRK3 is not set
# CONFIG_EEXPRESS is not set
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_HPLAN_PLUS is not set
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
# CONFIG_ETH16I is not set
# CONFIG_NE2000 is not set
# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
CONFIG_E1000_DISABLE_PACKET_SPLIT=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
CONFIG_BNX2=m
# CONFIG_QLA3XXX is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
# CONFIG_NET_WIRELESS_RTNETLINK is not set

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set

#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=m
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y

#
# Video Capture Adapters
#

#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set

#
# V4L USB devices
#

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
# CONFIG_USB_DSBR is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID Devices
#
CONFIG_HID=y

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set

#
# LED devices
#
# CONFIG_NEW_LEDS is not set

#
# LED drivers
#

#
# LED Triggers
#

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_POLL=y

#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set

#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set

#
# DMA Clients
#

#
# DMA Devices
#

#
# Virtualization
#
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Distributed Lock Manager
#
# CONFIG_DLM is not set

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=m

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-01-14 11:03 Linux v2.6.20-rc5 Jeff Chua
@ 2007-01-14 12:56 ` Adrian Bunk
  2007-01-14 13:46   ` Jeff Chua
  0 siblings, 1 reply; 18+ messages in thread
From: Adrian Bunk @ 2007-01-14 12:56 UTC (permalink / raw)
  To: Jeff Chua; +Cc: Linux Kernel, Jan Engelhardt, Andrew Morton, Linus Torvalds

On Sun, Jan 14, 2007 at 07:03:12PM +0800, Jeff Chua wrote:
> 
> On 1/14/07, Adrian Bunk <bunk@stusta.de> wrote:
> >On Sun, Jan 14, 2007 at 03:38:24PM +0800, Jeff Chua wrote:
> >>
> >> setting CONFIG_PARAVIRT=y will return in ...
> >>
> >>       vmmon.ko module unknown symbol paravirt_ops
> >>
> >Please send the 2.6.20-rc5 .config you saw this with.
> 
> Adrian,
> 
> 
> Only difference is (without CONFIG_PARAVIRT) ...
> 
> < CONFIG_PARAVIRT=y
> ---
> ># CONFIG_PARAVIRT is not set
> 
> 
> Thanks,
> Jeff.
> 
> 
> Here's my .config ...
>...

I don't have any illegal modules for testing, but the resulting kernel 
looks good (and many other of the drivers in your kernel would break if 
paravirt_ops wasn't exported).

Could it be you compiled the module against a CONFIG_PARAVIRT=y tree and 
tried to use it with a CONFIG_PARAVIRT=n kernel?

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed


^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-01-14 12:56 ` Adrian Bunk
@ 2007-01-14 13:46   ` Jeff Chua
  2007-03-08  8:15     ` albcamus
  0 siblings, 1 reply; 18+ messages in thread
From: Jeff Chua @ 2007-01-14 13:46 UTC (permalink / raw)
  To: Adrian Bunk; +Cc: Linux Kernel, Jan Engelhardt, Andrew Morton, Linus Torvalds

On 1/14/07, Adrian Bunk <bunk@stusta.de> wrote:
> On Sun, Jan 14, 2007 at 07:03:12PM +0800, Jeff Chua wrote:
> >
> > On 1/14/07, Adrian Bunk <bunk@stusta.de> wrote:
> > >On Sun, Jan 14, 2007 at 03:38:24PM +0800, Jeff Chua wrote:
> > >>
> > >> setting CONFIG_PARAVIRT=y will return in ...
> > >>
> > >>       vmmon.ko module unknown symbol paravirt_ops

> Could it be you compiled the module against a CONFIG_PARAVIRT=y tree and
> tried to use it with a (CONFIG_PARAVIRT=n kernel?

I recompiled the vmmon module under the new kernel with
CONFIG_PARAVIRT=y. It compiled fine, but when loaded, it gives the
unknown symbol warning. I shalll make it clear that this is not a
kernel issue ... it's just vmware, but I don't know how to fix it, and
needed help from the experts.

Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 18+ messages in thread

* RE: Linux v2.6.20-rc5
  2007-01-14 13:46   ` Jeff Chua
@ 2007-03-08  8:15     ` albcamus
  2007-03-08 15:20       ` Jeff Chua
  0 siblings, 1 reply; 18+ messages in thread
From: albcamus @ 2007-03-08  8:15 UTC (permalink / raw)
  To: Jeff Chua
  Cc: Adrian Bunk, Linux Kernel, Jan Engelhardt, Andrew Morton, Linus Torvalds

I guess that it is because 'paravirt_ops' was exported as GPL symbol, whereas
the vmware module doen't declare any license.

I tried to add the following line:

MODULE_LICENSE("GPL");

into vmmon.tar and vmnet.tar under /usr/lib/vmare/modules/source/,
then it works.
 (but maybe will tear the copyright by VMWare Inc.)

my kernel: 2.6.21-rc3 with CONFIG_PARAVIRT=y

>2007/1/14, Jeff Chua <jeff.chua.linux@gmail.com>:

> I recompiled the vmmon module under the new kernel with
> CONFIG_PARAVIRT=y. It compiled fine, but when loaded, it gives the
> unknown symbol warning. I shalll make it clear that this is not a
> kernel issue ... it's just vmware, but I don't know how to fix it, and
> needed help from the experts.
>
> Thanks,
> Jeff.

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-03-08  8:15     ` albcamus
@ 2007-03-08 15:20       ` Jeff Chua
  0 siblings, 0 replies; 18+ messages in thread
From: Jeff Chua @ 2007-03-08 15:20 UTC (permalink / raw)
  To: albcamus
  Cc: Adrian Bunk, Linux Kernel, Jan Engelhardt, Andrew Morton, Linus Torvalds

On 3/8/07, albcamus <albcamus@gmail.com> wrote:
> I guess that it is because 'paravirt_ops' was exported as GPL symbol, whereas
> the vmware module doen't declare any license.
>
> I tried to add the following line:
>
> MODULE_LICENSE("GPL");
>
> into vmmon.tar and vmnet.tar under /usr/lib/vmare/modules/source/,
> then it works.


I'll try that. Thanks. Here's what I did, but don't know whether it's
the right approach (but, at least vmware still works) ...

Thanks,
Jeff.


--- vmware/vmmon-only/include/driver-config.h.org       2007-01-26
10:46:01 +0800
+++ vmware/vmmon-only/include/driver-config.h   2006-11-14 05:06:18 +0800
@@ -19,7 +19,8 @@
 #include "includeCheck.h"

 #include <linux/autoconf.h>
+#undef CONFIG_PARAVIRT
 #include "compat_version.h"

 /* We rely on Kernel Module support.  Check here. */

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-01-13  6:05 Jeff Chua
@ 2007-01-23  3:11 ` Herbert Xu
  0 siblings, 0 replies; 18+ messages in thread
From: Herbert Xu @ 2007-01-23  3:11 UTC (permalink / raw)
  To: Jeff Chua; +Cc: linux-kernel, torvalds, akpm

Jeff Chua <jeff.chua.linux@gmail.com> wrote:
> 
> 
> From: Jeff Chua <jchua@fedex.com>
> 
>>   CC [M]  drivers/kvm/vmx.o
>> {standard input}: Assembler messages:
>> {standard input}:3257: Error: bad register name `%sil'
>> make[2]: *** [drivers/kvm/vmx.o] Error 1
>> make[1]: *** [drivers/kvm] Error 2
>> make: *** [drivers] Error 2
> 
> I'm not using the kernel profiler, so here's a patch to make it work without 
> CONFIG_PROFILING.

Actually that only happens to work by chance (by making one of al/bl/cl/dl
available).  This patch should fix it properly.

Cheers,
-- 
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
--
diff --git a/drivers/kvm/vmx.c b/drivers/kvm/vmx.c
index ce219e3..0aa2659 100644
--- a/drivers/kvm/vmx.c
+++ b/drivers/kvm/vmx.c
@@ -1824,7 +1824,7 @@ again:
 #endif
 		"setbe %0 \n\t"
 		"popf \n\t"
-	      : "=g" (fail)
+	      : "=q" (fail)
 	      : "r"(vcpu->launched), "d"((unsigned long)HOST_RSP),
 		"c"(vcpu),
 		[rax]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RAX])),

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-01-14  7:38       ` Jeff Chua
@ 2007-01-14  7:43         ` Adrian Bunk
  0 siblings, 0 replies; 18+ messages in thread
From: Adrian Bunk @ 2007-01-14  7:43 UTC (permalink / raw)
  To: Jeff Chua
  Cc: Jan Engelhardt, Andrew Morton, Linus Torvalds, Linux Kernel Mailing List

On Sun, Jan 14, 2007 at 03:38:24PM +0800, Jeff Chua wrote:
> On 1/13/07, Jan Engelhardt <jengelh@linux01.gwdg.de> wrote:
> >On Jan 13 2007 06:01, Adrian Bunk wrote:
> >>On Fri, Jan 12, 2007 at 02:26:45PM -0800, Andrew Morton wrote:
> 
> >*cough*vmware*cough*
> 
> setting CONFIG_PARAVIRT=y will return in ...
> 
>       vmmon.ko module unknown symbol paravirt_ops
> 
> Without it, vmware runs run. Any fix?

Please send the 2.6.20-rc5 .config you saw this with.

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed


^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-01-13 13:02     ` Jan Engelhardt
@ 2007-01-14  7:38       ` Jeff Chua
  2007-01-14  7:43         ` Adrian Bunk
  0 siblings, 1 reply; 18+ messages in thread
From: Jeff Chua @ 2007-01-14  7:38 UTC (permalink / raw)
  To: Jan Engelhardt
  Cc: Adrian Bunk, Andrew Morton, Linus Torvalds, Linux Kernel Mailing List

On 1/13/07, Jan Engelhardt <jengelh@linux01.gwdg.de> wrote:
> On Jan 13 2007 06:01, Adrian Bunk wrote:
> >On Fri, Jan 12, 2007 at 02:26:45PM -0800, Andrew Morton wrote:

> *cough*vmware*cough*

setting CONFIG_PARAVIRT=y will return in ...

       vmmon.ko module unknown symbol paravirt_ops

Without it, vmware runs run. Any fix?

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-01-13  3:36   ` Jeff Chua
  2007-01-13  3:44     ` Jeff Chua
@ 2007-01-13 23:58     ` Segher Boessenkool
  1 sibling, 0 replies; 18+ messages in thread
From: Segher Boessenkool @ 2007-01-13 23:58 UTC (permalink / raw)
  To: Jeff Chua; +Cc: Linus Torvalds, Linux Kernel Mailing List, Andrew Morton

>  CC [M]  drivers/kvm/vmx.o
> {standard input}: Assembler messages:
> {standard input}:3257: Error: bad register name `%sil'
> make[2]: *** [drivers/kvm/vmx.o] Error 1
> make[1]: *** [drivers/kvm] Error 2
> make: *** [drivers] Error 2
>
> Am I missing something or this is a real problem?

What's on (and sround) that line #3257?


Segher


^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-01-13  3:44     ` Jeff Chua
@ 2007-01-13 20:23       ` Bill Davidsen
  0 siblings, 0 replies; 18+ messages in thread
From: Bill Davidsen @ 2007-01-13 20:23 UTC (permalink / raw)
  To: Jeff Chua; +Cc: Linus Torvalds, Linux Kernel Mailing List

Jeff Chua wrote:
> On 1/13/07, Jeff Chua <jeff.chua.linux@gmail.com> wrote:
>> On 1/13/07, Andrew Morton <akpm@osdl.org> wrote:
>> > On Fri, 12 Jan 2007 14:27:48 -0500 (EST)
>> > Linus Torvalds <torvalds@osdl.org> wrote:
>>
>>   CC [M]  drivers/kvm/vmx.o
>> {standard input}: Assembler messages:
>> {standard input}:3257: Error: bad register name `%sil'
>> make[2]: *** [drivers/kvm/vmx.o] Error 1
>> make[1]: *** [drivers/kvm] Error 2
>> make: *** [drivers] Error 2
>>
>> Am I missing something or this is a real problem?
>> Applied 2.6.20-rc5-mm-fixes and got this problem.
>> Using gcc version 3.4.5, binutils-2.17.50.0.8
> 
> Same problem with vanilla linux-2.6.20-rc5.

What target? I had no such problem with x86, haven't tried the x86_64 
build yet. Haven't even been able to try a boot, but the build was fine ;-)

-- 
bill davidsen <davidsen@tmr.com>
   CTO TMR Associates, Inc
   Doing interesting things with small computers since 1979

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-01-13  5:01   ` Adrian Bunk
@ 2007-01-13 13:02     ` Jan Engelhardt
  2007-01-14  7:38       ` Jeff Chua
  0 siblings, 1 reply; 18+ messages in thread
From: Jan Engelhardt @ 2007-01-13 13:02 UTC (permalink / raw)
  To: Adrian Bunk; +Cc: Andrew Morton, Linus Torvalds, Linux Kernel Mailing List


On Jan 13 2007 06:01, Adrian Bunk wrote:
>On Fri, Jan 12, 2007 at 02:26:45PM -0800, Andrew Morton wrote:
>> On Fri, 12 Jan 2007 14:27:48 -0500 (EST)
>> Linus Torvalds <torvalds@osdl.org> wrote:
>> 
>> > 
>> > Ok, there it is, in all its shining glory.
>> 
>> It still doesn't run Excel.
>>...
>
>It should work with CrossOver.

*cough*vmware*cough*


	-`J'
-- 

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
@ 2007-01-13  6:05 Jeff Chua
  2007-01-23  3:11 ` Herbert Xu
  0 siblings, 1 reply; 18+ messages in thread
From: Jeff Chua @ 2007-01-13  6:05 UTC (permalink / raw)
  To: Linux Kernel, Linus Torvalds, Andrew Morton



From: Jeff Chua <jchua@fedex.com>

>   CC [M]  drivers/kvm/vmx.o
> {standard input}: Assembler messages:
> {standard input}:3257: Error: bad register name `%sil'
> make[2]: *** [drivers/kvm/vmx.o] Error 1
> make[1]: *** [drivers/kvm] Error 2
> make: *** [drivers] Error 2


I'm not using the kernel profiler, so here's a patch to make it work without 
CONFIG_PROFILING.


Thanks,
Jeff


--- linux/drivers/kvm/vmx.c.org	2007-01-13 12:57:28 +0800
+++ linux/drivers/kvm/vmx.c	2007-01-13 14:01:17 +0800
@@ -21,7 +21,11 @@
  #include <linux/module.h>
  #include <linux/mm.h>
  #include <linux/highmem.h>
+
+#ifdef CONFIG_PROFILING
  #include <linux/profile.h>
+#endif
+
  #include <asm/io.h>
  #include <asm/desc.h>

@@ -1861,11 +1865,13 @@
  	asm ("mov %0, %%ds; mov %0, %%es" : : "r"(__USER_DS));
  #endif

+#ifdef CONFIG_PROFILING
  	/*
  	 * Profile KVM exit RIPs:
  	 */
  	if (unlikely(prof_on == KVM_PROFILING))
  		profile_hit(KVM_PROFILING, (void *)vmcs_readl(GUEST_RIP));
+#endif

  	kvm_run->exit_type = 0;
  	if (fail) {

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-01-12 22:26 ` Andrew Morton
  2007-01-13  2:26   ` Nigel Cunningham
  2007-01-13  3:36   ` Jeff Chua
@ 2007-01-13  5:01   ` Adrian Bunk
  2007-01-13 13:02     ` Jan Engelhardt
  2 siblings, 1 reply; 18+ messages in thread
From: Adrian Bunk @ 2007-01-13  5:01 UTC (permalink / raw)
  To: Andrew Morton; +Cc: Linus Torvalds, Linux Kernel Mailing List

On Fri, Jan 12, 2007 at 02:26:45PM -0800, Andrew Morton wrote:
> On Fri, 12 Jan 2007 14:27:48 -0500 (EST)
> Linus Torvalds <torvalds@osdl.org> wrote:
> 
> > 
> > Ok, there it is, in all its shining glory.
> 
> It still doesn't run Excel.
>...

It should work with CrossOver.

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed


^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-01-13  3:36   ` Jeff Chua
@ 2007-01-13  3:44     ` Jeff Chua
  2007-01-13 20:23       ` Bill Davidsen
  2007-01-13 23:58     ` Segher Boessenkool
  1 sibling, 1 reply; 18+ messages in thread
From: Jeff Chua @ 2007-01-13  3:44 UTC (permalink / raw)
  To: Andrew Morton; +Cc: Linus Torvalds, Linux Kernel Mailing List

On 1/13/07, Jeff Chua <jeff.chua.linux@gmail.com> wrote:
> On 1/13/07, Andrew Morton <akpm@osdl.org> wrote:
> > On Fri, 12 Jan 2007 14:27:48 -0500 (EST)
> > Linus Torvalds <torvalds@osdl.org> wrote:
>
>   CC [M]  drivers/kvm/vmx.o
> {standard input}: Assembler messages:
> {standard input}:3257: Error: bad register name `%sil'
> make[2]: *** [drivers/kvm/vmx.o] Error 1
> make[1]: *** [drivers/kvm] Error 2
> make: *** [drivers] Error 2
>
> Am I missing something or this is a real problem?
> Applied 2.6.20-rc5-mm-fixes and got this problem.
> Using gcc version 3.4.5, binutils-2.17.50.0.8

Same problem with vanilla linux-2.6.20-rc5.

Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-01-12 22:26 ` Andrew Morton
  2007-01-13  2:26   ` Nigel Cunningham
@ 2007-01-13  3:36   ` Jeff Chua
  2007-01-13  3:44     ` Jeff Chua
  2007-01-13 23:58     ` Segher Boessenkool
  2007-01-13  5:01   ` Adrian Bunk
  2 siblings, 2 replies; 18+ messages in thread
From: Jeff Chua @ 2007-01-13  3:36 UTC (permalink / raw)
  To: Andrew Morton; +Cc: Linus Torvalds, Linux Kernel Mailing List

On 1/13/07, Andrew Morton <akpm@osdl.org> wrote:
> On Fri, 12 Jan 2007 14:27:48 -0500 (EST)
> Linus Torvalds <torvalds@osdl.org> wrote:

> http://userweb.kernel.org/~akpm/2.6.20-rc5-mm-fixes
> The KVM and direct-io changes are significant, so if people are testing
> those things, please be sure to have that patch applied.

  CC [M]  drivers/kvm/vmx.o
{standard input}: Assembler messages:
{standard input}:3257: Error: bad register name `%sil'
make[2]: *** [drivers/kvm/vmx.o] Error 1
make[1]: *** [drivers/kvm] Error 2
make: *** [drivers] Error 2

Am I missing something or this is a real problem?

Applied 2.6.20-rc5-mm-fixes and got this problem.

Using gcc version 3.4.5, binutils-2.17.50.0.8


Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-01-12 22:26 ` Andrew Morton
@ 2007-01-13  2:26   ` Nigel Cunningham
  2007-01-13  3:36   ` Jeff Chua
  2007-01-13  5:01   ` Adrian Bunk
  2 siblings, 0 replies; 18+ messages in thread
From: Nigel Cunningham @ 2007-01-13  2:26 UTC (permalink / raw)
  To: Andrew Morton; +Cc: Linus Torvalds, Linux Kernel Mailing List

Hi.

On Fri, 2007-01-12 at 14:26 -0800, Andrew Morton wrote:
> On Fri, 12 Jan 2007 14:27:48 -0500 (EST)
> Linus Torvalds <torvalds@osdl.org> wrote:
> 
> > 
> > Ok, there it is, in all its shining glory.
> > 
> 
> It still doesn't run Excel.

Heretic!

:)



^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: Linux v2.6.20-rc5
  2007-01-12 19:27 Linus Torvalds
@ 2007-01-12 22:26 ` Andrew Morton
  2007-01-13  2:26   ` Nigel Cunningham
                     ` (2 more replies)
  0 siblings, 3 replies; 18+ messages in thread
From: Andrew Morton @ 2007-01-12 22:26 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Linux Kernel Mailing List

On Fri, 12 Jan 2007 14:27:48 -0500 (EST)
Linus Torvalds <torvalds@osdl.org> wrote:

> 
> Ok, there it is, in all its shining glory.
> 

It still doesn't run Excel.

> A lot of developers (including me) will be gone next week for 
> Linux.Conf.Au,

me too.

> so you have a week of rest and quiet to test this, and 
> report any problems. 

I have a few fixes pending:

kvm-add-vm-exit-profiling-fix.patch
revert-nmi_known_cpu-check-during-boot-option-parsing.patch
blockdev-direct_io-fix-signedness-bug.patch
submitchecklist-update.patch
paravirt-mark-the-paravirt_ops-export-internal.patch
kvm-make-sure-there-is-a-vcpu-context-loaded-when.patch
kvm-fix-race-between-mmio-reads-and-injected-interrupts.patch
kvm-x86-emulator-fix-bit-string-instructions.patch
kvm-fix-asm-constraints-with-config_frame_pointer=n.patch
kvm-fix-bogus-pagefault-on-writable-pages.patch
rtc-sh-act-on-rtc_wkalrmenabled-when-setting-an-alarm.patch
fix-blk_direct_io-bio-preparation.patch
tlclk-bug-fix-misc-fixes.patch
mbind-restrict-nodes-to-the-currently-allowed-cpuset.patch
reiserfs-avoid-tail-packing-if-an-inode-was-ever-mmapped.patch

all of which are present in
http://userweb.kernel.org/~akpm/2.6.20-rc5-mm-fixes

The KVM and direct-io changes are significant, so if people are testing
those things, please be sure to have that patch applied.

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Linux v2.6.20-rc5
@ 2007-01-12 19:27 Linus Torvalds
  2007-01-12 22:26 ` Andrew Morton
  0 siblings, 1 reply; 18+ messages in thread
From: Linus Torvalds @ 2007-01-12 19:27 UTC (permalink / raw)
  To: Linux Kernel Mailing List

[-- Attachment #1: Type: TEXT/PLAIN, Size: 10662 bytes --]


Ok, there it is, in all its shining glory.

A lot of developers (including me) will be gone next week for 
Linux.Conf.Au, so you have a week of rest and quiet to test this, and 
report any problems. 

Not that there will be any, right? You all behave now!

The patches here are pretty basic. Lots of small stuff. The shortlog 
(appended) explains it about as well as you can.

POWER, ARM, MIPS, S/390, some netfilter fixes etc.

		Linus
---
Aaron Salter (1):
      ixgb: Write RA register high word first, increment version

Adrian Drzewiecki (1):
      HID: fix mappings for DiNovo Edge Keyboard - Logitech USB BT receiver

Ahmed S. Darwish (1):
      HID: tiny patch to remove a kmalloc cast

Alexander Bigga (1):
      [MIPS] Alchemy:  Fix PCI-memory access

Andi Kleen (4):
      x86-64: Update defconfig
      i386: Update defconfig
      x86-64: Use different constraint for gcc < 4.1 in bitops.h
      x86-64: Fix warnings in ia32_aout.c

Andrew Hendry (1):
      [X25]: Trivial, SOCK_DEBUG's in x25_facilities missing newlines

Andrew Morton (1):
      FD_ZERO build fix

Anton Blanchard (2):
      [POWERPC] Fix corruption in hcall9
      [POWERPC] Fix bugs in the hypervisor call stats code

Atsushi Nemoto (6):
      [MIPS] csum_partial and copy in parallel
      [MIPS] SMTC build fix
      [MIPS] Fix build errors on SEAD
      [MIPS] TX49: Fix use of CDEX build_store_reg()
      [MIPS] PNX8550: Fix system timer initialization
      [MIPS] Fix N32 SysV IPC routines

Ayaz Abdulla (1):
      forcedeth: sideband management fix

Bart De Schuymer (1):
      [NETFILTER]: arp_tables: fix userspace compilation

Ben Dooks (1):
      [ARM] 4070/1: arch/arm/kernel: fix warnings from missing includes

Brice Goglin (1):
      increment pos before looking for the next cap in __pci_find_next_ht_cap

Christian Borntraeger (1):
      [S390] locking problem with __cpcmd.

Clemens Ladisch (1):
      [ALSA] usb-audio: work around wrong frequency in CM6501 descriptors

Craig Schlenter (1):
      [TCP]: Fix iov_len calculation in tcp_v4_send_ack().

Dan Williams (2):
      [ARM] 4079/1: iop: Update MAINTAINERS
      [ARM] 4082/1: iop3xx: fix iop33x gpio register offset

Daniel Ritz (1):
      PCMCIA: fix drivers broken by recent cleanup

Dave Hansen (1):
      Fix sparsemem on Cell

David Brownell (2):
      MMC: at91 mmc linkage updates
      rtc-sh: correctly report rtc_wkalrm.enabled

David Chinner (1):
      Revert bd_mount_mutex back to a semaphore

David Gibson (1):
      [POWERPC] Fix bogus BUG_ON() in in hugetlb_get_unmapped_area()

David Miller (1):
      really fix funsoft driver

David Woodhouse (1):
      [POWERPC] Fix manual assembly WARN_ON() in enter_rtas().

Davy Chan (1):
      [MIPS] pnx8550: Fix write_config_byte() PCI config space accessor

Dotan Barak (1):
      IB/mthca: Don't execute QUERY_QP firmware command for QP in RESET state

Erez Zilber (1):
      IB/iser: Return error code when PDUs may not be sent

Frank Blaschka (3):
      s390: qeth driver fixes: VLAN hdr, perf stats
      s390: qeth driver fixes: packet socket
      s390: qeth driver fixes: atomic context fixups

Frank Pavlic (1):
      s390: iucv Kconfig help description changes

Gautham R Shenoy (1):
      Change cpu_up and co from __devinit to __cpuinit

Giuliano Pochini (1):
      [ALSA] Fix potential NULL pointer dereference in echoaudio midi

Grant Likely (3):
      [POWERPC] Fix mpc52xx fdt to use correct device_type for sound devices
      [POWERPC] Don't include powerpc/sysdev/rom.o for arch/ppc builds
      [POWERPC] Fix mpc52xx serial driver to work for arch/ppc again

Heiko Carstens (5):
      qeth: fix uaccess handling and get rid of unused variable
      [S390] cio: use barrier() in stsch_reset.
      [S390] Fix cpu hotplug (missing 'online' attribute).
      [S390] Fix vmalloc area size calculation.
      [S390] don't call handle_mm_fault() if in an atomic context.

Henrique de Moraes Holschuh (1):
      Revert "ACPI: ibm-acpi: make non-generic bay support optional"

Hoang-Nam Nguyen (1):
      IB/ehca: Use proper GFP_ flags for get_zeroed_page()

Hongjie Yang (1):
      [S390] memory detection misses 128k.

Ingo Molnar (1):
      KVM: add VM-exit profiling

Jack Morgenstein (1):
      IB/mthca: Fix PRM compliance problem in atomic-send completions

Jack Steiner (1):
      x86-64: - Ignore long SMI interrupts in clock calibration

Jan Beulich (1):
      intel-rng workarounds

Jarek Poplawski (1):
      [IPV4] devinet: inetdev_init out label moved after RCU assignment

Jaroslav Kysela (1):
      [ALSA] version 1.0.14rc1

Jason Gaston (1):
      [ALSA] hda_intel: ALSA HD Audio patch for Intel ICH9

Jeff Garzik (1):
      Revert "[PATCH] e1000: disable TSO on the 82544 with slab debugging"

Jens Axboe (1):
      blktrace: only add a bounce trace when we really bounce

Jesse Brandeburg (2):
      ixgb: Fix early TSO completion
      ixgb: Maybe stop TX if not enough free descriptors

Jiri Kosina (2):
      HID: mousepoll parameter makes no sense for generic HID
      HID: Fix DRIVER_DESC macro

John Keller (1):
      ACPI: Altix: ACPI _PRT support

Komuro (1):
      pcnet_cs : add new id

Kyungmin Park (1):
      ARM: OMAP: fix MMC workqueue changes

Lars Ellenberg (1):
      md: pass down BIO_RW_SYNC in raid{1,10}

Len Brown (3):
      ACPI: ec: enable printk on cmdline use
      ACPI: schedule obsolete features for deletion
      ACPI: update MAINTAINERS

Linus Torvalds (3):
      Revert "[PATCH] x86-64: Try multiple timer variants in check_timer"
      Don't put "linux_banner" in the .init section
      Linux v2.6.20-rc5

Marcel Holtmann (7):
      [Bluetooth] Add packet size checks for CAPI messages
      [Bluetooth] More checks if DLC is still attached to the TTY
      [Bluetooth] Fix uninitialized return value for RFCOMM sendmsg()
      [Bluetooth] Handle device registration failures
      [Bluetooth] Correct SCO buffer size for another ThinkPad laptop
      [Bluetooth] Correct SCO buffer for Broadcom based HP laptops
      [Bluetooth] Correct SCO buffer for Broadcom based Dell laptops

Mariusz Kozlowski (1):
      [ALSA] usb: usbmixer error path fix

Mark M. Hoffman (1):
      i2c/pci: fix sis96x smbus quirk once and for all

Michael Buesch (1):
      Fix HWRNG built-in initcalls priority

Michael Chan (5):
      [BNX2]: Don't apply CRC PHY workaround to 5709.
      [BNX2]: Fix 5709 Serdes detection.
      [BNX2]: Fix bug in bnx2_nvram_write().
      [BNX2]: Update version and reldate.
      [TG3]: Add PHY workaround for 5755M.

Michael S. Tsirkin (1):
      IB/mthca: Fix off-by-one in FMR handling on memfree

Michal Ostrowski (1):
      [POWERPC] Avoid calling get_irq_server() with a real, not virtual irq.

Mikael Pettersson (1):
      MAINTAINERS: maintainer for sata_promise

Michel Dänzer (1):
      i915: Fix a DRM_ERROR that should be DRM_DEBUG.

Muli Ben-Yehuda (1):
      x86-64: tighten up printks

Nathan Lynch (2):
      [POWERPC] Fix unbalanced uses of of_node_put
      sched: tasks cannot run on cpus onlined after boot

Olaf Hering (1):
      [POWERPC] disable PReP and EFIKA during make oldconfig

Patrick McHardy (4):
      [NETFILTER]: nf_conntrack_netbios_ns: fix uninitialized member in expectation
      [NETFILTER]: nf_conntrack_ipv6: fix crash when handling fragments
      [NETFILTER]: nf_nat: fix hanging connections when loading the NAT module
      [NETFILTER]: tcp conntrack: fix IP_CT_TCP_FLAG_CLOSE_INIT value

Paul Moore (4):
      [INET]: Fix incorrect "inet_sock->is_icsk" assignment.
      NetLabel: correct locking in selinux_netlbl_socket_setsid()
      NetLabel: correct CIPSO tag handling when adding new DOI definitions
      [INET]: style updates for the inet_sock->is_icsk assignment fix

Peer Chen (1):
      [ALSA] Audio: Add nvidia HD Audio controllers of MCP67 support to hda_intel.c

Ralf Baechle (1):
      [MIPS] Malta: Add missing MTD file.

Roman Zippel (2):
      fix linux banner format string
      qconf: (re)fix SIGSEGV on empty menu items

Ron Mercer (2):
      qla3xxx: Remove NETIF_F_LLTX from driver features.
      qla3xxx: Add delay to NVRAM register access.

Russell King (5):
      [ARM] Fix kernel-mode undefined instruction aborts
      [ARM] Fix potential MMCI bug
      [ARM] pass vma for flush_anon_page()
      [ARM] Resolve fuse and direct-IO failures due to missing cache flushes
      [ARM] Provide basic printk_clock() implementation

Sean Hefty (2):
      RDMA/ucma: Fix struct ucma_event leak when backlog is full
      RDMA/ucma: Don't report events with invalid user context

Stefan Richter (1):
      ieee1394: sbp2: fix probing of some DVD-ROM/RWs

Stephen Hemminger (1):
      chelsio: error path fix

Stephen Rothwell (7):
      [POWERPC] Update ppc64_defconfig
      [POWERPC] Add legacy iSeries to ppc64_defconfig
      [POWERPC] iSeries: fix mf proc initialisation
      [POWERPC] iSeries: fix proc/iSeries initialisation
      [POWERPC] iSeries: fix lpevents initialisation
      [POWERPC] iSeries: fix viopath initialisation
      [POWERPC] iSeries: fix setup initcall

Steve Wise (1):
      RDMA/iwcm: iWARP connection timeouts shouldn't be reported as rejects

Sylvain Munaut (1):
      [POWERPC] 52xx: Don't use device_initcall to probe of_platform_bus

Takashi Iwai (2):
      [ALSA] hda-codec - Fix NULL dereference in generic hda code
      [ALSA] usbaudio - Fix kobject_add() error at reconnection

Timofei V. Bondarenko (1):
      [ALSA] _snd_cmipci_uswitch_put doesn't set zero flags

Trond Myklebust (1):
      NFS: Fix race in nfs_release_page()

Venkat Yekkirala (1):
      selinux: Delete mls_copy_context

Venkatesh Pallipadi (2):
      ACPI: rename cstate_entry_s to cstate_entry
      ACPI: delete two spurious ACPI messages

Vitaly Wool (1):
      [MIPS] PNX8550: Fix system timer support

Vivek Goyal (10):
      x86-64: Make noirqdebug_setup function non init to fix modpost warning
      i386: cpu hotplug/smpboot misc MODPOST warning fixes
      i386: make apic probe function non-init
      x86-64: modpost add more symbols to whitelist pattern2
      x86-64: Modpost whitelist reference to more symbols (pattern 3)
      x86-64: pci quirks MODPOST warning fix
      i386: Fix memory hotplug related MODPOST generated warning
      i386: Convert some functions to __init to avoid MODPOST warnings
      Kdump documentation update
      i386: sched_clock using init data tsc_disable fix

Vlad Yasevich (1):
      [SCTP]: Fix err_hdr assignment in sctp_init_cause.

Zhu Yi (2):
      ieee80211: WLAN_GET_SEQ_SEQ fix (select correct region)
      ipw2100: Fix dropping fragmented small packet problem

takada (1):
      fix typo in geode_configre()@cyrix.c

^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2007-03-08 15:20 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-01-14 11:03 Linux v2.6.20-rc5 Jeff Chua
2007-01-14 12:56 ` Adrian Bunk
2007-01-14 13:46   ` Jeff Chua
2007-03-08  8:15     ` albcamus
2007-03-08 15:20       ` Jeff Chua
  -- strict thread matches above, loose matches on Subject: below --
2007-01-13  6:05 Jeff Chua
2007-01-23  3:11 ` Herbert Xu
2007-01-12 19:27 Linus Torvalds
2007-01-12 22:26 ` Andrew Morton
2007-01-13  2:26   ` Nigel Cunningham
2007-01-13  3:36   ` Jeff Chua
2007-01-13  3:44     ` Jeff Chua
2007-01-13 20:23       ` Bill Davidsen
2007-01-13 23:58     ` Segher Boessenkool
2007-01-13  5:01   ` Adrian Bunk
2007-01-13 13:02     ` Jan Engelhardt
2007-01-14  7:38       ` Jeff Chua
2007-01-14  7:43         ` Adrian Bunk

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).