LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Subhash Jadavani <subhashj@codeaurora.org>
To: Asutosh Das <asutoshd@codeaurora.org>
Cc: cang@codeaurora.org, vivek.gautam@codeaurora.org,
rnayak@codeaurora.org, vinholikatti@gmail.com,
jejb@linux.vnet.ibm.com, martin.petersen@oracle.com,
linux-mmc@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
Venkat Gopalakrishnan <venkatg@codeaurora.org>,
linux-kernel@vger.kernel.org, linux-scsi-owner@vger.kernel.org
Subject: Re: [PATCH v2 03/10] scsi: ufs: Add LCC quirk for host and device
Date: Wed, 16 May 2018 14:11:17 -0700 [thread overview]
Message-ID: <b96ac094fc3c99d4f0f47f266f38f778@codeaurora.org> (raw)
In-Reply-To: <0aa7ff1ff67e0c01d6347b932cfe7ce801ef09fc.1525343531.git.asutoshd@codeaurora.org>
On 2018-05-03 04:07, Asutosh Das wrote:
> LCC (Line Control Command) is being used for communication between
> UFS host and UFS device. But some hosts might have the issue with
> issuing the LCC commands to UFS device and in this case LCC could be
> explicitly disabled.
>
> But there could be a need where we don't want to disable the LCC
> on both host & device; hence this change splits the quirk in 2 parts
> one for host and one for device.
>
> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
> Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
> Signed-off-by: Can Guo <cang@codeaurora.org>
> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
> ---
> drivers/scsi/ufs/ufshcd.c | 16 ++++++++++++++++
> drivers/scsi/ufs/ufshcd.h | 12 ++++++++++++
> 2 files changed, 28 insertions(+)
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index f3083fe..6dabce8 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -4116,6 +4116,11 @@ static int ufshcd_disable_tx_lcc(struct ufs_hba
> *hba, bool peer)
> return err;
> }
>
> +static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba)
> +{
> + return ufshcd_disable_tx_lcc(hba, false);
> +}
> +
> static inline int ufshcd_disable_device_tx_lcc(struct ufs_hba *hba)
> {
> return ufshcd_disable_tx_lcc(hba, true);
> @@ -4172,6 +4177,17 @@ static int ufshcd_link_startup(struct ufs_hba
> *hba)
> ufshcd_dme_set(hba, UIC_ARG_MIB(TX_LCC_ENABLE), 1);
> }
>
> + if (hba->quirks & UFSHCD_BROKEN_LCC_PROCESSING_ON_HOST) {
> + ret = ufshcd_disable_device_tx_lcc(hba);
> + if (ret)
> + goto out;
> + }
> +
> + if (hba->quirks & UFSHCD_BROKEN_LCC_PROCESSING_ON_DEVICE) {
> + ret = ufshcd_disable_host_tx_lcc(hba);
> + if (ret)
> + goto out;
> + }
> if (link_startup_again) {
> link_startup_again = false;
> retries = DME_LINKSTARTUP_RETRIES;
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index bb4ecfb..0417c42 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -598,6 +598,18 @@ struct ufs_hba {
> * TX_LCC.
> */
> #define UFSHCD_QUIRK_BROKEN_PWR_MODE_CHANGE UFS_BIT(8)
> +
> + /*
> + * If UFS device is having issue in processing LCC (Line Control
> + * Command) coming from UFS host controller then enable this quirk.
> + * When this quirk is enabled, host controller driver should disable
> + * the LCC transmission on UFS host controller (by clearing
> + * TX_LCC_ENABLE attribute of host to 0).
> + */
> + #define UFSHCD_BROKEN_LCC_PROCESSING_ON_DEVICE 0x100
> +
> + #define UFSHCD_BROKEN_LCC_PROCESSING_ON_HOST 0x200
> +
> unsigned int quirks; /* Deviations from standard UFSHCI spec. */
>
> /* Device deviations from standard UFS device spec. */
Please check if these quirks are really needed for commercial version of
UFS host controllers.
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2018-05-16 21:11 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1525341340.git.asutoshd@codeaurora.org>
[not found] ` <cover.1525343531.git.asutoshd@codeaurora.org>
2018-05-03 11:07 ` [PATCH v2 01/10] scsi: ufs: Allowing power mode change Asutosh Das
2018-05-16 21:09 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 02/10] scsi: ufs-qcom: Enable UFSHCD_QUIRK_BROKEN_PWR_MODE_CHANGE quirk Asutosh Das
2018-05-16 21:10 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 03/10] scsi: ufs: Add LCC quirk for host and device Asutosh Das
2018-05-16 21:11 ` Subhash Jadavani [this message]
2018-05-03 11:07 ` [PATCH v2 04/10] scsi: ufs: fix exception event handling Asutosh Das
2018-05-16 21:12 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 05/10] scsi: ufshcd: fix possible unclocked register access Asutosh Das
2018-05-16 21:12 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 06/10] scsi: ufs: add reference counting for scsi block requests Asutosh Das
2018-05-16 21:13 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 07/10] scsi: ufs-qcom: remove broken hci version quirk Asutosh Das
2018-05-16 21:13 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 08/10] scsi: ufs: make sure all interrupts are processed Asutosh Das
2018-05-16 21:14 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 09/10] scsi: ufs: fix irq return code Asutosh Das
2018-06-28 22:26 ` Subhash Jadavani
2018-05-03 11:07 ` [PATCH v2 10/10] scsi: ufs: Add clock ungating to a separate workqueue Asutosh Das
2018-05-16 21:14 ` Subhash Jadavani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b96ac094fc3c99d4f0f47f266f38f778@codeaurora.org \
--to=subhashj@codeaurora.org \
--cc=asutoshd@codeaurora.org \
--cc=cang@codeaurora.org \
--cc=jejb@linux.vnet.ibm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-scsi-owner@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=rnayak@codeaurora.org \
--cc=venkatg@codeaurora.org \
--cc=vinholikatti@gmail.com \
--cc=vivek.gautam@codeaurora.org \
--subject='Re: [PATCH v2 03/10] scsi: ufs: Add LCC quirk for host and device' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).