LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: poza@codeaurora.org
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Philippe Ombredanne <pombredanne@nexb.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Kate Stewart <kstewart@linuxfoundation.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Dongdong Liu <liudongdong3@huawei.com>,
	Keith Busch <keith.busch@intel.com>, Wei Zhang <wzhang@fb.com>,
	Sinan Kaya <okaya@codeaurora.org>,
	Timur Tabi <timur@codeaurora.org>,
	linux-pci-owner@vger.kernel.org
Subject: Re: [PATCH v15 3/9] PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices
Date: Thu, 10 May 2018 12:31:16 +0530	[thread overview]
Message-ID: <c2238d174e550250b0b93a497c40cf6a@codeaurora.org> (raw)
In-Reply-To: <20180509232111.GA43216@bhelgaas-glaptop.roam.corp.google.com>

On 2018-05-10 04:51, Bjorn Helgaas wrote:
> On Wed, May 09, 2018 at 06:44:53PM +0530, poza@codeaurora.org wrote:
>> On 2018-05-09 18:37, Bjorn Helgaas wrote:
>> > On Tue, May 08, 2018 at 06:53:30PM -0500, Bjorn Helgaas wrote:
>> > > On Thu, May 03, 2018 at 01:03:52AM -0400, Oza Pawandeep wrote:
>> > > > This patch alters the behavior of handling of ERR_FATAL, where removal
>> > > > of devices is initiated, followed by reset link, followed by
>> > > > re-enumeration.
>> > > >
>> > > > So the errors are handled in a different way as follows:
>> > > > ERR_NONFATAL => call driver recovery entry points
>> > > > ERR_FATAL    => remove and re-enumerate
>> > > >
>> > > > please refer to Documentation/PCI/pci-error-recovery.txt for more details.
>> > > >
>> > > > Signed-off-by: Oza Pawandeep <poza@codeaurora.org>
>> > > >
>> > > > diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c
>> > > > index 779b387..206f590 100644
>> > > > --- a/drivers/pci/pcie/aer/aerdrv.c
>> > > > +++ b/drivers/pci/pcie/aer/aerdrv.c
>> > > > @@ -330,6 +330,13 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
>> > > >         reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
>> > > >         pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, reg32);
>> > > >
>> > > > +       /*
>> > > > +        * This function is called only on ERR_FATAL now, and since
>> > > > +        * the pci_report_resume is called only in ERR_NONFATAL case,
>> > > > +        * the clearing part has to be taken care here.
>> > > > +        */
>> > > > +       aer_error_resume(dev);
>> > >
>> > > I don't understand this part.  Previously the ERR_FATAL path looked
>> > > like
>> > > this:
>> > >
>> > >   do_recovery
>> > >     reset_link
>> > >       driver->reset_link
>> > >         aer_root_reset
>> > >           pci_reset_bridge_secondary_bus                # <-- reset
>> > >     broadcast_error_message(..., report_resume)
>> > >       pci_walk_bus(..., report_resume, ...)
>> > >         report_resume
>> > >       if (cb == report_resume)
>> > >         pci_cleanup_aer_uncorrect_error_status
>> > >           pci_write_config_dword(PCI_ERR_UNCOR_STATUS)  # <-- clear
>> > > status
>> > >
>> > > After this patch, it will look like this:
>> > >
>> > >   do_recovery
>> > >     do_fatal_recovery
>> > >       pci_cleanup_aer_uncorrect_error_status
>> > >         pci_write_config_dword(PCI_ERR_UNCOR_STATUS)    # <-- clear
>> > > status
>> > >       reset_link
>> > >         driver->reset_link
>> > >           aer_root_reset
>> > >             pci_reset_bridge_secondary_bus              # <-- reset
>> > >             aer_error_resume
>> > >               pcie_capability_write_word(PCI_EXP_DEVSTA)        #
>> > > <-- clear more
>> > >               pci_write_config_dword(PCI_ERR_UNCOR_STATUS)      #
>> > > <-- clear status
>> > >
>> > > So if I'm understanding correctly, the new path clears the status too
>> > > early, then clears it again (plus clearing DEVSTA, which we didn't do
>> > > before) later.
>> > >
>> > > I would think we would want to leave aer_root_reset() alone, and
>> > > just move
>> > > the pci_cleanup_aer_uncorrect_error_status() in do_fatal_recovery()
>> > > down so
>> > > it happens after we call reset_link().  That way the reset/clear
>> > > sequence
>> > > would be the same as it was before.
>> >
>> > I've been fiddling with this a bit myself and will post the results to
>> > see
>> > what you think.
>> 
>> 
>> ok so you are suggesting to move 
>> pci_cleanup_aer_uncorrect_error_status down
>> which I can do.
>> 
>> And not to call aer_error_resume, because you think its clearing the 
>> status
>> again.
>> 
>> following code: calls aer_error_resume.
>> pci_broadcast_error_message()
>>  /*
>>                  * If the error is reported by an end point, we think 
>> this
>>                  * error is related to the upstream link of the end 
>> point.
>>                  */
>>                 if (state == pci_channel_io_normal)
>>                         /*
>>                          * the error is non fatal so the bus is ok, 
>> just
>> invoke
>>                          * the callback for the function that logged 
>> the
>> error.
>>                          */
>>                         cb(dev, &result_data);
>>                 else
>>                         pci_walk_bus(dev->bus, cb, &result_data);
> 
> Holy crap, I thought this could not possibly get any more complicated,
> but you're right; we do actually call aer_error_resume() today via an
> extremely convoluted path:
> 
>   do_recovery(pci_dev)
>     broadcast_error_message(..., error_detected, ...)
>     if (AER_FATAL)
>       reset_link(pci_dev)
>         udev = BRIDGE ? pci_dev : pci_dev->bus->self
>         driver->reset_link(udev)
>           aer_root_reset(udev)
>     if (CAN_RECOVER)
>       broadcast_error_message(..., mmio_enabled, ...)
>     if (NEED_RESET)
>       broadcast_error_message(..., slot_reset, ...)
>     broadcast_error_message(dev, ..., report_resume, ...)
>       if (BRIDGE)
>         report_resume
>           driver->resume
>             pcie_portdrv_err_resume
>               device_for_each_child(..., resume_iter)
>                 resume_iter
>                   driver->error_resume
>                     aer_error_resume
>         pci_cleanup_aer_uncorrect_error_status(pci_dev)       # only if 
> BRIDGE
>           pci_write_config_dword(PCI_ERR_UNCOR_STATUS)
> 
> aerdriver is the only port service driver that implements
> .error_resume(), and aerdriver only binds to root ports.  I can't
> really believe all these device_for_each_child()/resume_iter()
> gyrations are necessary when this is AER code calling AER code.
> 
> Bjorn

here is the code of do_fatal_recovery, where I have moved the things 
down and doing only if it is bridge.
let me know how this looks to you, so then I can post v16.


static pci_ers_result_t do_fatal_recovery(struct pci_dev *dev, int 
severity)
{
         struct pci_dev *udev;
         struct pci_bus *parent;
         struct pci_dev *pdev, *temp;
         struct aer_broadcast_data result_data;
         pci_ers_result_t result = PCI_ERS_RESULT_RECOVERED;


         if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
                 udev = dev;
         else
                 udev = dev->bus->self;

         parent = udev->subordinate;
         pci_lock_rescan_remove();
         list_for_each_entry_safe_reverse(pdev, temp, &parent->devices,
                                  bus_list) {
                 pci_dev_get(pdev);
                 pci_dev_set_disconnected(pdev, NULL);
                 if (pci_has_subordinate(pdev))
                         pci_walk_bus(pdev->subordinate,
                                      pci_dev_set_disconnected, NULL);
                 pci_stop_and_remove_bus_device(pdev);
                 pci_dev_put(pdev);
         }

         result = reset_link(udev, severity);
         if (severity == AER_FATAL && dev->hdr_type == 
PCI_HEADER_TYPE_BRIDGE) {
                 pci_walk_bus(dev->subordinate, report_resume, 
&result_data);
                 pci_cleanup_aer_uncorrect_error_status(dev);
                 dev->error_state = pci_channel_io_normal;
         }
         if (result == PCI_ERS_RESULT_RECOVERED)
                 if (pcie_wait_for_link(udev, true))
                         pci_rescan_bus(udev->bus);

         pci_unlock_rescan_remove();

         return result;
}

Regards,
Oza.

  reply	other threads:[~2018-05-10  7:01 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-03  5:03 [PATCH v15 0/9] Address error and recovery for AER and DPC Oza Pawandeep
2018-05-03  5:03 ` [PATCH v15 1/9] PCI: Unify wait for link active into generic PCI Oza Pawandeep
2018-05-10 13:18   ` Bjorn Helgaas
2018-05-03  5:03 ` [PATCH v15 2/9] pci-error-recovery: Add AER_FATAL handling Oza Pawandeep
2018-05-03  5:03 ` [PATCH v15 3/9] PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices Oza Pawandeep
2018-05-08 23:53   ` Bjorn Helgaas
2018-05-09 13:07     ` Bjorn Helgaas
2018-05-09 13:14       ` poza
2018-05-09 23:21         ` Bjorn Helgaas
2018-05-10  7:01           ` poza [this message]
2018-05-10 13:10             ` Bjorn Helgaas
2018-05-10 13:15               ` okaya
2018-05-10 14:18                 ` poza
2018-05-10 13:17   ` Bjorn Helgaas
2018-05-03  5:03 ` [PATCH v15 4/9] PCI/AER: Rename error recovery to generic PCI naming Oza Pawandeep
2018-05-03  5:03 ` [PATCH v15 5/9] PCI/AER: Factor out error reporting from AER Oza Pawandeep
2018-05-03 21:52   ` kbuild test robot
2018-05-03 22:53   ` kbuild test robot
2018-05-04  6:48   ` poza
2018-05-03  5:03 ` [PATCH v15 6/9] PCI/PORTDRV: Implement generic find service Oza Pawandeep
2018-05-03  5:03 ` [PATCH v15 7/9] PCI/PORTDRV: Implement generic find device Oza Pawandeep
2018-05-10 13:31   ` Bjorn Helgaas
2018-05-03  5:03 ` [PATCH v15 8/9] PCI/DPC: Unify and plumb error handling into DPC Oza Pawandeep
2018-05-10 13:22   ` Bjorn Helgaas
2018-05-10 14:26     ` poza
2018-05-10 16:27       ` Bjorn Helgaas
2018-05-03  5:03 ` [PATCH v15 9/9] PCI/DPC: Disable ERR_NONFATAL and enable ERR_FATAL for DPC Oza Pawandeep
2018-05-10 13:26   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c2238d174e550250b0b93a497c40cf6a@codeaurora.org \
    --to=poza@codeaurora.org \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=helgaas@kernel.org \
    --cc=keith.busch@intel.com \
    --cc=kstewart@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci-owner@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=liudongdong3@huawei.com \
    --cc=okaya@codeaurora.org \
    --cc=pombredanne@nexb.com \
    --cc=tglx@linutronix.de \
    --cc=timur@codeaurora.org \
    --cc=wzhang@fb.com \
    --subject='Re: [PATCH v15 3/9] PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).