LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Michael Riesch <michael.riesch@wolfvision.net>
To: pgwipeout@gmail.com
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
	linux-rockchip@lists.infradead.org
Subject: Re: [PATCH v2 0/8] phy-rockchip-inno-usb2: support rk356x usb2phy
Date: Thu, 14 Oct 2021 12:11:34 +0200	[thread overview]
Message-ID: <c2df4e64-a0aa-8da4-e279-2666e4d53d63@wolfvision.net> (raw)
In-Reply-To: <20210812204116.2303617-1-pgwipeout@gmail.com>

Hi Peter,

> Good Afternoon,
> 
> This is my series to support the usb2 phy devices on the rk356x.
> The rk356x phy has a single muxed interrupt and has moved the usb2phy
> nodes out of the grf and into their own nodes.
> The phy needs to tie back into the grf for register control, similar to
> the rv1108.
> By moving the phys into their own nodes, they now have full
> #address_cells = 2 register addresses, but they still reside below the 32bit
> mmio range.
> 
> This driver series only supports the host configuration for the rk356x.
> I have have tested it on the following:
> rk3566 - Pine64 Quartz64 Model A
> rk3399 - Pine64 Rockpro64

On a RK3568 EVB1 with suitable additions to the board dts:
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>

Thanks for your efforts and best regards,
Michael

> 
> Please provide feedback and comments as you see fit.
> 
> Changelog:
> v2:
> - correct the order of the usb2phy-grf dt-bindings patch, thanks Johan
> - correct the conditional requirements of phy-rockchip-inno-usb2, thanks
>   Johan
> - drop increase generic-ohci clocks patch, thanks Heiko
> - correct rk356x.dtsi ordering
> - fix a dtbs-check callout
> 
> Peter Geis (8):
>   dt-bindings: soc: rockchip: add rk3568-usb2phy-grf
>   dt-bindings: phy: phy-rockchip-inno-usb2: add rk3568 documentation
>   phy: phy-rockchip-inno-usb2: support #address_cells = 2
>   phy: phy-rockchip-inno-usb2: support standalone phy nodes
>   phy: phy-rockchip-inno-usb2: support muxed interrupts
>   phy: phy-rockchip-inno-usb2: add rk3568 support
>   arm64: dts: rockchip: add usb2 nodes to rk3568 device tree
>   arm64: dts: rockchip: add Quartz64-A usb2 support
> 
>  .../bindings/phy/phy-rockchip-inno-usb2.yaml  |  31 ++-
>  .../devicetree/bindings/soc/rockchip/grf.yaml |   1 +
>  .../boot/dts/rockchip/rk3566-quartz64-a.dts   |  52 ++++
>  arch/arm64/boot/dts/rockchip/rk356x.dtsi      |  98 +++++++
>  drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 259 ++++++++++++++----
>  5 files changed, 383 insertions(+), 58 deletions(-)
> 
> -- 
> 2.25.1
> 

      parent reply	other threads:[~2021-10-14 10:11 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-12 20:41 Peter Geis
2021-08-12 20:41 ` [PATCH v2 1/8] dt-bindings: soc: rockchip: add rk3568-usb2phy-grf Peter Geis
2021-08-17 21:31   ` Rob Herring
2021-08-12 20:41 ` [PATCH v2 2/8] dt-bindings: phy: phy-rockchip-inno-usb2: add rk3568 documentation Peter Geis
2021-08-17 16:52   ` Johan Jonker
2021-08-17 21:43     ` Rob Herring
2021-08-12 20:41 ` [PATCH v2 3/8] phy: phy-rockchip-inno-usb2: support #address_cells = 2 Peter Geis
2021-08-12 20:41 ` [PATCH v2 4/8] phy: phy-rockchip-inno-usb2: support standalone phy nodes Peter Geis
2021-08-12 20:41 ` [PATCH v2 5/8] phy: phy-rockchip-inno-usb2: support muxed interrupts Peter Geis
2021-08-12 20:41 ` [PATCH v2 6/8] phy: phy-rockchip-inno-usb2: add rk3568 support Peter Geis
2021-08-12 20:41 ` [PATCH v2 7/8] arm64: dts: rockchip: add usb2 nodes to rk3568 device tree Peter Geis
2021-10-14 10:02   ` Michael Riesch
2021-08-12 20:41 ` [PATCH v2 8/8] arm64: dts: rockchip: add Quartz64-A usb2 support Peter Geis
2021-10-14 10:11 ` Michael Riesch [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c2df4e64-a0aa-8da4-e279-2666e4d53d63@wolfvision.net \
    --to=michael.riesch@wolfvision.net \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=pgwipeout@gmail.com \
    --subject='Re: [PATCH v2 0/8] phy-rockchip-inno-usb2: support rk356x usb2phy' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).