LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Sören Brinkmann" <soren.brinkmann@xilinx.com>
To: "Andreas Färber" <afaerber@suse.de>
Cc: <monstr@monstr.eu>, Michal Simek <michal.simek@xilinx.com>,
	<devicetree@vger.kernel.org>,
	Peter Crosthwaite <peter.crosthwaite@xilinx.com>,
	Arnd Bergmann <arnd@arndb.de>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Ola Jeppson <ola@adapteva.com>
Subject: Re: [PATCH v3] ARM: zynq: DT: Add USB to device tree
Date: Mon, 26 Jan 2015 07:50:22 -0800	[thread overview]
Message-ID: <c65880cef67945ebaf61306febc1349b@BN1BFFO11FD010.protection.gbl> (raw)
In-Reply-To: <54C60A56.7010403@suse.de>

On Mon, 2015-01-26 at 10:35AM +0100, Andreas Färber wrote:
> Am 26.01.2015 um 09:33 schrieb Andreas Färber:
> > Am 26.01.2015 um 09:23 schrieb Michal Simek:
> >> On 01/26/2015 09:19 AM, Andreas Färber wrote:
> >>> And if I apply it to my -next based tree, adding corresponding nodes to
> >>> zynq-parallella.dts, I get repeatedly:
> >>>
> >>> [  +0,012242] ci_hdrc ci_hdrc.0: no of_node; not parsing pinctrl DT
> >>> [  +0,000157] ci_hdrc ci_hdrc.0: ChipIdea HDRC found, lpm: 0; cap:
> >>> f090e100 op: f090e140
> >>> [  +0,000081] platform ci_hdrc.0: Driver ci_hdrc requests probe deferral
> >>> [  +0,005360] ci_hdrc ci_hdrc.1: no of_node; not parsing pinctrl DT
> >>> [  +0,000120] ci_hdrc ci_hdrc.1: ChipIdea HDRC found, lpm: 0; cap:
> >>> f0910100 op: f0910140
> >>> [  +0,001810] platform ci_hdrc.1: Driver ci_hdrc requests probe deferral
> >>>
> >>> Am I missing any other patches or config options?
> >>> (I do notice that the pinctrl v3 patch that got merged has a trivial bug
> >>> for usb0, for which I'll send a patch later on.)
> >>
> >> Why is it deferred? Is it because of pinmuxing stuff?
> > 
> > No, happened without as well.
> > 
> > Looking at a different place in dmesg, I spot this:
> > 
> > [  +0,003988] usb_phy_generic phy0: GPIO lookup for consumer reset-gpios
> > [  +0,000012] usb_phy_generic phy0: using device tree for GPIO lookup
> > [  +0,000015] of_get_named_gpiod_flags: can't parse 'reset-gpios-gpios'
> > property
> >  of node '/phy0[0]'
> > [  +0,000013] of_get_named_gpiod_flags: can't parse 'reset-gpios-gpio'
> > property
> > of node '/phy0[0]'
> > [  +0,000010] usb_phy_generic phy0: using lookup tables for GPIO lookup
> > [  +0,000153] usb_phy_generic phy0: lookup for GPIO reset-gpios failed
> > [  +0,000012] usb_phy_generic phy0: Error requesting RESET GPIO
> > [  +0,004360] usb_phy_generic: probe of phy0 failed with error -2
> > [  +0,004991] usb_phy_generic phy1: GPIO lookup for consumer reset-gpios
> > [  +0,000012] usb_phy_generic phy1: using device tree for GPIO lookup
> > [  +0,000013] of_get_named_gpiod_flags: can't parse 'reset-gpios-gpios'
> > property
> >  of node '/phy1[0]'
> > [  +0,000013] of_get_named_gpiod_flags: can't parse 'reset-gpios-gpio'
> > property of node '/phy1[0]'
> > [  +0,000010] usb_phy_generic phy1: using lookup tables for GPIO lookup
> > [  +0,000012] usb_phy_generic phy1: lookup for GPIO reset-gpios failed
> > [  +0,000011] usb_phy_generic phy1: Error requesting RESET GPIO
> > [  +0,004337] usb_phy_generic: probe of phy1 failed with error -2
> > 
> > So, I guess the chipidea driver is deferring because the phys want a
> > property that neither me nor you are specifying? Would that be the two
> > MDIO pins 52 and 53 that would need to be specified?
> 
> Erm, scratch that last question - wrong PHY. Trying it resolved the
> above phy errors but not the original problem. And so does an empty one:
> 
> @@ -99,11 +100,13 @@
> 
>         usb_phy0: phy0 {
>                 compatible = "usb-nop-xceiv";
> +               reset-gpios = <>;
>                 #phy-cells = <0>;
>         };
> 
>         usb_phy1: phy1 {
>                 compatible = "usb-nop-xceiv";
> +               reset-gpios = <>;
>                 #phy-cells = <0>;
>         };
>  };
> 
> In my manuals and notes I can't find any GPIO being used as reset for
> the USB PHYs. Any thoughts appreciated.

Such a connection is optional. The platform might rely on its reset
circuit, though it might not work for warm reboots.
I haven't looked at parallela docs, but if there is a schematic
available, that should tell you if/what is connected to the PHY reset
pin.

	Soren

  reply	other threads:[~2015-01-26 15:50 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-02 16:07 Soren Brinkmann
2014-12-03  8:39 ` Michal Simek
2015-01-26  8:19   ` Andreas Färber
2015-01-26  8:23     ` Michal Simek
2015-01-26  8:33       ` Andreas Färber
2015-01-26  9:35         ` Andreas Färber
2015-01-26 15:50           ` Sören Brinkmann [this message]
2015-01-26 16:21             ` Andreas Färber
2015-01-26 16:23               ` Sören Brinkmann
2015-01-26 18:44                 ` Sören Brinkmann
2015-01-27  1:14                   ` Andreas Färber
2015-01-27  1:20                     ` Sören Brinkmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c65880cef67945ebaf61306febc1349b@BN1BFFO11FD010.protection.gbl \
    --to=soren.brinkmann@xilinx.com \
    --cc=afaerber@suse.de \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=monstr@monstr.eu \
    --cc=ola@adapteva.com \
    --cc=peter.crosthwaite@xilinx.com \
    --subject='Re: [PATCH v3] ARM: zynq: DT: Add USB to device tree' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).