LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Martin Kepplinger <martin.kepplinger@puri.sm>
To: Geert Uytterhoeven <geert@linux-m68k.org>,
	Sakari Ailus <sakari.ailus@iki.fi>
Cc: Pavel Machek <pavel@ucw.cz>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
	kernel@puri.sm,
	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Linux Media Mailing List <linux-media@vger.kernel.org>,
	Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
	phone-devel@vger.kernel.org, Rob Herring <robh@kernel.org>,
	shawnx.tu@intel.com
Subject: Re: [PATCH v9 2/4] dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor
Date: Tue, 30 Nov 2021 15:57:18 +0100	[thread overview]
Message-ID: <cbf47818643901943b844fb729c9ac360d7f3bd3.camel@puri.sm> (raw)
In-Reply-To: <CAMuHMdXaywzfzLDoWYj0vfQ=xjUc+exgwUrrfNvp0Z-eVcNNMg@mail.gmail.com>

Am Freitag, dem 26.11.2021 um 13:03 +0100 schrieb Geert Uytterhoeven:
> Hi Martin,
> 
> On Fri, Nov 26, 2021 at 11:18 AM Sakari Ailus <sakari.ailus@iki.fi>
> wrote:
> > On Fri, Nov 26, 2021 at 11:02:31AM +0100, Martin Kepplinger wrote:
> > > Am Donnerstag, dem 25.11.2021 um 12:15 +0100 schrieb Geert
> > > Uytterhoeven:
> > > > On Mon, Sep 6, 2021 at 12:30 PM Martin Kepplinger
> > > > <martin.kepplinger@puri.sm> wrote:
> > > > > Document the bindings used for the SK Hynix Hi-846 CMOS
> > > > > camera
> > > > > driver.
> > > > > 
> > > > > Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> > > > > Reviewed-by: Laurent Pinchart <
> > > > > laurent.pinchart@ideasonboard.com>
> > > > > Reviewed-by: Rob Herring <robh@kernel.org>
> > > > > ---
> > > > >  .../bindings/media/i2c/hynix,hi846.yaml       | 120
> > > > > ++++++++++++++++++
> > > > >  1 file changed, 120 insertions(+)
> > > > >  create mode 100644
> > > > > Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > > > > 
> > > > > diff --git
> > > > > a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yam
> > > > > l
> > > > > b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yam
> > > > > l
> > > > > new file mode 100644
> > > > > index 000000000000..85a8877c2f38
> > > > > --- /dev/null
> > > > > +++
> > > > > b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yam
> > > > > l
> > > > > @@ -0,0 +1,120 @@
> > > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > > +%YAML 1.2
> > > > > +---
> > > > > +$id: 
> > > > > http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml#
> > > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > > +
> > > > > +title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor
> > > > > +
> > > > > +maintainers:
> > > > > +  - Martin Kepplinger <martin.kepplinger@puri.sm>
> > > > > +
> > > > > +description: |-
> > > > > +  The Hi-846 is a raw image sensor with an MIPI CSI-2 image
> > > > > data
> > > > > +  interface and CCI (I2C compatible) control bus. The output
> > > > > format
> > > > > +  is raw Bayer.
> > > > > +
> > > > > +properties:
> > > > > +  compatible:
> > > > > +    const: hynix,hi846
> > > > > +
> > > > > +  reg:
> > > > > +    maxItems: 1
> > > > > +
> > > > > +  clocks:
> > > > > +    items:
> > > > > +      - description: Reference to the mclk clock.
> > > > > +
> > > > > +  assigned-clocks:
> > > > > +    maxItems: 1
> > > > > +
> > > > > +  assigned-clock-rates:
> > > > > +    maxItems: 1
> > > > > +
> > > > > +  reset-gpios:
> > > > > +    description: Reference to the GPIO connected to the
> > > > > RESETB
> > > > > pin. Active low.
> > > > > +    maxItems: 1
> > > > > +
> > > > > +  shutdown-gpios:
> > > > > +    description: Reference to the GPIO connected to the
> > > > > XSHUTDOWN
> > > > > pin. Active low.
> > > > > +    maxItems: 1
> > > > > +
> > > > > +  vddio-supply:
> > > > > +    description: Definition of the regulator used for the
> > > > > VDDIO
> > > > > power supply.
> > > > > +
> > > > > +  vdda-supply:
> > > > > +    description: Definition of the regulator used for the
> > > > > VDDA
> > > > > power supply.
> > > > > +
> > > > > +  vddd-supply:
> > > > > +    description: Definition of the regulator used for the
> > > > > VDDD
> > > > > power supply.
> > > > > +
> > > > > +  port:
> > > > > +    $ref: /schemas/graph.yaml#/properties/port
> > > > > +
> > > > > +    properties:
> > > > > +      endpoint:
> > > > > +        $ref: /schemas/media/video-interfaces.yaml#
> > > > > +        unevaluatedProperties: false
> > > > > +
> > > > > +        properties:
> > > > > +          data-lanes:
> > > > > +            oneOf:
> > > > > +              - items:
> > > > > +                  - const: 1
> > > > > +                  - const: 2
> > > > > +                  - const: 3
> > > > > +                  - const: 4
> > > > > +              - items:
> > > > > +                  - const: 1
> > > > > +                  - const: 2
> > > > > +
> > > > > +        required:
> > > > > +          - data-lanes
> > > > > +
> > > > > +required:
> > > > > +  - compatible
> > > > > +  - reg
> > > > > +  - clocks
> > > > > +  - assigned-clocks
> > > > > +  - assigned-clock-rates
> > > > > +  - vddio-supply
> > > > > +  - vdda-supply
> > > > > +  - vddd-supply
> > > > > +  - port
> > > > > +
> > > > > +additionalProperties: false
> > > > > +
> > > > > +examples:
> > > > > +  - |
> > > > > +    #include <dt-bindings/gpio/gpio.h>
> > > > > +
> > > > > +    i2c {
> > > > > +        #address-cells = <1>;
> > > > > +        #size-cells = <0>;
> > > > > +
> > > > > +        hi846: camera@20 {
> > > > > +            compatible = "hynix,hi846";
> > > > > +            reg = <0x20>;
> > > > > +            pinctrl-names = "default";
> > > > > +            pinctrl-0 = <&pinctrl_csi1>;
> > > > > +            clocks = <&clk 0>;
> > > > > +            assigned-clocks = <&clk 0>;
> > > > > +            assigned-clock-rates = <25000000>;
> > > > > +            vdda-supply = <&reg_camera_vdda>;
> > > > > +            vddd-supply = <&reg_camera_vddd>;
> > > > > +            vddio-supply = <&reg_camera_vddio>;
> > > > > +            reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> > > > > +            shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
> > > > > +
> > > > > +            port {
> > > > > +                camera_out: endpoint {
> > > > > +                    remote-endpoint = <&csi1_ep1>;
> > > > > +                    link-frequencies = /bits/ 64
> > > > > +                        <80000000 200000000>;
> > > > > +                    data-lanes = <1 2>;
> > > > 
> > > > "make dt_binding_check":
> > > > 
> > > > 
> > > > Documentation/devicetree/bindings/media/i2c/hynix,hi846.example
> > > > .dt.ya
> > > > ml:
> > > > camera@20: port:endpoint: Unevaluated properties are not
> > > > allowed
> > > > ('link-frequencies', 'data-lanes' were unexpected)
> > > >     From schema:
> > > > Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > > > 
> > > > > +                };
> > > > > +            };
> > > > > +        };
> > > > > +    };
> > > > 
> > > > Gr{oetje,eeting}s,
> > > > 
> > > >                         Geert
> > > 
> > > 
> > > thanks a lot Geert, but I can't reproduce this on linux-next.
> > > Which
> > > tree did you run it against?
> > > 
> > > What I *do* see is the following during dtbs_check, so I guess I
> > > could
> > > remove "orientation" and "rotation" from the example, which would
> > > be
> > > kind of sad because these useful properties are not yet too wide
> > > know
> > > anyway in the media device driver world...
> > > 
> > > /home/martin/dev/purism-forks/linux-
> > > next/arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml:
> > > camera-front@20: 'orientation', 'rotation' do not match any of
> > > the
> > > regexes: 'pinctrl-[0-9]+'
> > >       From schema: /home/martin/dev/purism-forks/linux-
> > > next/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
> > > 
> > > 
> > > if you can be more speicific I'll definitely try to reproduce
> > > again
> > > though.
> 
> This is reproducible on next-20211126.
> Is your dt-schema up-to-date?

it is now, I'm running

make -j7 ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check
dtbs_check

but I can't reproduce that error. weird.

> 
> > link-frequencies is present in the example (as it needs to be) but
> > missing
> > from required properties. I don't know why there's a complaint
> > about
> > data-lanes though.
> 
> I also don't know what's wrong with data-lanes (else I would have
> sent a patch to fix it ;-)
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- 
> geert@linux-m68k.org
> 
> In personal conversations with technical people, I call myself a
> hacker. But
> when I'm talking to journalists I just say "programmer" or something
> like that.
>                                 -- Linus Torvalds



  reply	other threads:[~2021-11-30 15:08 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-06 10:28 [PATCH v9 0/4] Add support for the Hynix Hi-846 camera Martin Kepplinger
2021-09-06 10:28 ` [PATCH v9 1/4] dt-bindings: vendor-prefixes: Add SK Hynix Inc Martin Kepplinger
2021-09-06 10:28 ` [PATCH v9 2/4] dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor Martin Kepplinger
2021-11-25 11:15   ` Geert Uytterhoeven
2021-11-26 10:02     ` Martin Kepplinger
2021-11-26 10:18       ` Sakari Ailus
2021-11-26 12:03         ` Geert Uytterhoeven
2021-11-30 14:57           ` Martin Kepplinger [this message]
2021-12-01 10:32             ` Geert Uytterhoeven
2021-12-03 16:19   ` Rob Herring
2022-01-05 16:23     ` Rob Herring
2022-01-06  6:34       ` Martin Kepplinger
2021-09-06 10:28 ` [PATCH v9 3/4] media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera Martin Kepplinger
2021-09-06 10:28 ` [PATCH v9 4/4] Documentation: i2c-cardlist: add the Hynix hi846 sensor Martin Kepplinger
2021-09-28  9:50 ` [PATCH v9 0/4] Add support for the Hynix Hi-846 camera Martin Kepplinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cbf47818643901943b844fb729c9ac360d7f3bd3.camel@puri.sm \
    --to=martin.kepplinger@puri.sm \
    --cc=devicetree@vger.kernel.org \
    --cc=geert@linux-m68k.org \
    --cc=kernel@puri.sm \
    --cc=krzysztof.kozlowski@canonical.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=paul.kocialkowski@bootlin.com \
    --cc=pavel@ucw.cz \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=sakari.ailus@iki.fi \
    --cc=shawnx.tu@intel.com \
    --subject='Re: [PATCH v9 2/4] dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).