LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
To: LKML <firstname.lastname@example.org>,
Kernel Hardening <email@example.com>,
Linux Containers <firstname.lastname@example.org>,
Cc: Alexey Gladkov <email@example.com>,
Andrew Morton <firstname.lastname@example.org>,
Christian Brauner <email@example.com>,
"Eric W . Biederman" <firstname.lastname@example.org>,
Jann Horn <email@example.com>, Jens Axboe <firstname.lastname@example.org>,
Kees Cook <email@example.com>,
Linus Torvalds <firstname.lastname@example.org>,
Oleg Nesterov <email@example.com>
Subject: [PATCH v11 0/9] Count rlimits in each user namespace
Date: Thu, 22 Apr 2021 14:27:07 +0200 [thread overview]
Message-ID: <firstname.lastname@example.org> (raw)
From: Alexey Gladkov <email@example.com>
These patches are for binding the rlimit counters to a user in user namespace.
This patch set can be applied on top of:
The RLIMIT_NPROC, RLIMIT_MEMLOCK, RLIMIT_SIGPENDING, RLIMIT_MSGQUEUE rlimits
implementation places the counters in user_struct . These limits are global
between processes and persists for the lifetime of the process, even if
processes are in different user namespaces.
To illustrate the impact of rlimits, let's say there is a program that does not
fork. Some service-A wants to run this program as user X in multiple containers.
Since the program never fork the service wants to set RLIMIT_NPROC=1.
\- program (uid=1000, container1, rlimit_nproc=1)
\- program (uid=1000, container2, rlimit_nproc=1)
The service-A sets RLIMIT_NPROC=1 and runs the program in container1. When the
service-A tries to run a program with RLIMIT_NPROC=1 in container2 it fails
since user X already has one running process.
The problem is not that the limit from container1 affects container2. The
problem is that limit is verified against the global counter that reflects
the number of processes in all containers.
This problem can be worked around by using different users for each container
but in this case we face a different problem of uid mapping when transferring
files from one container to another.
Eric W. Biederman mentioned this issue .
To address the problem, we bind rlimit counters to user namespace. Each counter
reflects the number of processes in a given uid in a given user namespace. The
result is a tree of rlimit counters with the biggest value at the root (aka
init_user_ns). The limit is considered exceeded if it's exceeded up in the tree.
* Revert most of changes in signal.c to fix performance issues and remove
unnecessary memory allocations.
* Fixed issue found by lkp robot (again).
* Fixed memory leak in __sigqueue_alloc.
* Handled an unlikely situation when all consumers will return ucounts at once.
* Addressed other review comments from Eric W. Biederman.
* Used a negative value to check that the ucounts->count is close to overflow.
* Rebased onto v5.12-rc4.
* Used atomic_t for ucounts reference counting. Also added counter overflow
check (thanks to Linus Torvalds for the idea).
* Fixed other issues found by lkp-tests project in the patch that Reimplements
RLIMIT_MEMLOCK on top of ucounts.
* Fixed issues found by lkp-tests project in the patch that Reimplements
RLIMIT_MEMLOCK on top of ucounts.
* Fixed issues found by lkp-tests project.
* Rebased onto v5.11.
* Split the first commit into two commits: change ucounts.count type to atomic_long_t
and add ucounts to cred. These commits were merged by mistake during the rebase.
* The __get_ucounts() renamed to alloc_ucounts().
* The cred.ucounts update has been moved from commit_creds() as it did not allow
to handle errors.
* Added error handling of set_cred_ucounts().
* Reverted the type change of ucounts.count to refcount_t.
* Fixed typo in the kernel/cred.c
* Added get_ucounts() function to increase the reference count. The existing
get_counts() function renamed to __get_ucounts().
* The type of ucounts.count changed from atomic_t to refcount_t.
* Dropped 'const' from set_cred_ucounts() arguments.
* Fixed a bug with freeing the cred structure after calling cred_alloc_blank().
* Commit messages have been updated.
* Added selftest.
* RLIMIT_MEMLOCK, RLIMIT_SIGPENDING and RLIMIT_MSGQUEUE are migrated to ucounts.
* Added ucounts for pair uid and user namespace into cred.
* Added the ability to increase ucount by more than 1.
* After discussion with Eric W. Biederman, I increased the size of ucounts to
* Added ucount_max to avoid the fork bomb.
Alexey Gladkov (9):
Increase size of ucounts to atomic_long_t
Add a reference to ucounts for each cred
Use atomic_t for ucounts reference counting
Reimplement RLIMIT_NPROC on top of ucounts
Reimplement RLIMIT_MSGQUEUE on top of ucounts
Reimplement RLIMIT_SIGPENDING on top of ucounts
Reimplement RLIMIT_MEMLOCK on top of ucounts
kselftests: Add test to check for rlimit changes in different user
ucounts: Set ucount_max to the largest positive value the type can
fs/exec.c | 6 +-
fs/hugetlbfs/inode.c | 16 +-
fs/proc/array.c | 2 +-
include/linux/cred.h | 4 +
include/linux/hugetlb.h | 4 +-
include/linux/mm.h | 4 +-
include/linux/sched/user.h | 7 -
include/linux/shmem_fs.h | 2 +-
include/linux/signal_types.h | 4 +-
include/linux/user_namespace.h | 31 +++-
ipc/mqueue.c | 40 ++---
ipc/shm.c | 26 +--
kernel/cred.c | 50 +++++-
kernel/exit.c | 2 +-
kernel/fork.c | 18 +-
kernel/signal.c | 25 +--
kernel/sys.c | 14 +-
kernel/ucount.c | 116 ++++++++++---
kernel/user.c | 3 -
kernel/user_namespace.c | 9 +-
mm/memfd.c | 4 +-
mm/mlock.c | 22 ++-
mm/mmap.c | 4 +-
mm/shmem.c | 10 +-
tools/testing/selftests/Makefile | 1 +
tools/testing/selftests/rlimits/.gitignore | 2 +
tools/testing/selftests/rlimits/Makefile | 6 +
tools/testing/selftests/rlimits/config | 1 +
.../selftests/rlimits/rlimits-per-userns.c | 161 ++++++++++++++++++
29 files changed, 467 insertions(+), 127 deletions(-)
create mode 100644 tools/testing/selftests/rlimits/.gitignore
create mode 100644 tools/testing/selftests/rlimits/Makefile
create mode 100644 tools/testing/selftests/rlimits/config
create mode 100644 tools/testing/selftests/rlimits/rlimits-per-userns.c
next reply other threads:[~2021-04-22 12:27 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-22 12:27 legion [this message]
2021-04-22 12:27 ` [PATCH v11 1/9] Increase size of ucounts to atomic_long_t legion
2021-04-22 12:27 ` [PATCH v11 2/9] Add a reference to ucounts for each cred legion
2021-04-22 12:27 ` [PATCH v11 3/9] Use atomic_t for ucounts reference counting legion
2021-04-22 12:27 ` [PATCH v11 4/9] Reimplement RLIMIT_NPROC on top of ucounts legion
2021-04-29 14:04 ` Dan Carpenter
2021-04-30 18:09 ` [PATCH] ucounts: Silence warning in dec_rlimit_ucounts Eric W. Biederman
2021-04-22 12:27 ` [PATCH v11 5/9] Reimplement RLIMIT_MSGQUEUE on top of ucounts legion
2021-04-22 12:27 ` [PATCH v11 6/9] Reimplement RLIMIT_SIGPENDING " legion
2021-04-22 12:27 ` [PATCH v11 7/9] Reimplement RLIMIT_MEMLOCK " legion
2021-04-22 12:27 ` [PATCH v11 8/9] kselftests: Add test to check for rlimit changes in different user namespaces legion
2021-04-22 12:27 ` [PATCH v11 9/9] ucounts: Set ucount_max to the largest positive value the type can hold legion
2021-05-10 1:12 ` [PATCH v11 0/9] Count rlimits in each user namespace Andrew Morton
2021-05-12 13:14 ` Alexey Gladkov
2021-06-02 20:37 ` Eric W. Biederman
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--subject='Re: [PATCH v11 0/9] Count rlimits in each user namespace' \
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).