LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Scott Branden <email@example.com>
To: Olof Johansson <firstname.lastname@example.org>, Arnd Bergmann <email@example.com>
Cc: Greg Kroah-Hartman <firstname.lastname@example.org>,
Luis Chamberlain <email@example.com>,
David Brown <firstname.lastname@example.org>,
Alexander Viro <email@example.com>,
Shuah Khan <firstname.lastname@example.org>,
Bjorn Andersson <email@example.com>,
Shuah Khan <firstname.lastname@example.org>,
"Rafael J . Wysocki" <email@example.com>,
Linux FS-devel Mailing List <firstname.lastname@example.org>,
BCM Kernel Feedback <email@example.com>,
Andrew Morton <firstname.lastname@example.org>,
Dan Carpenter <email@example.com>,
Colin Ian King <firstname.lastname@example.org>,
Kees Cook <email@example.com>, Takashi Iwai <firstname.lastname@example.org>,
"open list:KERNEL SELFTEST FRAMEWORK"
<email@example.com>, Andy Gross <firstname.lastname@example.org>,
Desmond Yan <email@example.com>,
James Hu <firstname.lastname@example.org>
Subject: Re: [PATCH v2 6/7] misc: bcm-vk: add Broadcom VK driver
Date: Tue, 25 Feb 2020 14:37:36 -0800 [thread overview]
Message-ID: <email@example.com> (raw)
I'm trying to digest all the feedback of what needs to be done.
I will be fixing up all the valuable comments about general issues but
would like to know
what needs to be done about the tty interface.
The VK devices are configured to write serial data to circular buffers
in memory or out a UART.
When we configure a system using the UART we connect a cable to the host
and open a tty device.
When we don't connect a UART cable to the host we open the tty device in
our driver instead.
In this case the memory is exposed to the host via PCI BAR memory space.
The bcm-vk host driver then accesses PCI space and presents a tty
interface to the host.
We implemented a tty device to present the tty interface.
Host doesn't change anything other than opening a different devnode in
UART vs. PCI case.
Based on all the comments: what interface should we be providing in
On 2020-02-23 3:55 p.m., Olof Johansson wrote:
> On Sat, Feb 22, 2020 at 12:03 AM Arnd Bergmann <firstname.lastname@example.org> wrote:
>> On Fri, Feb 21, 2020 at 7:19 PM Scott Branden
>> <email@example.com> wrote:
>>> On 2020-02-19 11:47 p.m., Greg Kroah-Hartman wrote:
>>>> Have you worked with the V4L developers to tie this into the proper
>>>> in-kernel apis for this type of functionality?
>>> We looked at the V4L model doesn't have any support for anything we are
>>> doing in this driver.
>>> We also want a driver that doesn't care about video. It could be
>>> offloading crypto or other operations.
>>> We talked with Olof about all of this previously and he said leave it as
>>> a misc driver for now.
>>> He was going to discuss at linux plumbers conference that we need some
>>> sort of offload engine model that such devices could fit into.
>> I see. Have you looked at the "uacce" driver submission? It seems
>> theirs is similar enough that there might be some way to share interfaces.
> Uacce isn't a driver (or wasn't last time I looked at it, when it had
> a different name). It's more of a framework for standardized direct HW
> access from userspace, and relies on I/O virtualization to keep DMA
> secure/partitioned, etc. VK is more of a classic PCIe device, it'll
> handle DMA to/from the host, etc.
>>>> Using a tty driver seems like the totally incorrect way to do this, what
>>>> am I missing?
>>> tty driver is used to provide console access to the processors running
>>> on vk.
>>> Data is sent using the bcm_vk_msg interface by read/write operations
>>> from user space.
>>> VK then gets the messages and DMA's the data to/from host memory when
>>> needed to process.
>> In turn here, it sounds like you'd want to look at what drivers/misc/mic/
>> and the mellanox bluefield drivers are doing. As I understand, they have the
>> same requirements for console, but have a nicer approach of providing
>> abstract 'virtio' channels between the PCIe endpoint and the host, and
>> then run regular virtio based drivers (console, tty, block, filesystem,
>> network, ...) along with application specific ones to provide the custom
>> high-level protocols.
> This has more value on the device than on the host, as far as I've
> seen it used (if you want to boot Linux on it and have things
> virtio isn't necessarily a match if all you really want is a character
> stream for a console and don't need (or have performance requirements
> beyond what virtio offers) other types of communication.
>> This is also similar to what the drivers/pci/endpoint
>> (from the other end) as the drivers/ntb (pci host on both ends) frameworks
>> and of course the rpmsg/remoteproc framework do.
> remoteproc is more about booting a tightly integrated device on an
> embedded system. Also not a match here IMHO.
>> In the long run, I would want much more consolidation between the
>> low-level parts of all these frameworks, but moving your high-level
>> protocols to the same virtio method would sound like a step in the
>> direction towards a generialized framework and easier sharing of
>> the abstractions.
> For a simple naive console/character stream, doing something on top of
> hvc might be easier -- it already does polling for you, etc.
> Of course, the intent is not to ever use it as a console for the host
> here, so that aspect of hvc isn't useful. But it gives you a bunch of
> other stuff for free with just getchar/putchar interfaces to
next prev parent reply other threads:[~2020-02-25 22:37 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-20 0:48 [PATCH v2 0/7] firmware: add partial read support in request_firmware_into_buf Scott Branden
2020-02-20 0:48 ` [PATCH v2 1/7] fs: introduce kernel_pread_file* support Scott Branden
2020-02-20 0:48 ` [PATCH v2 2/7] firmware: add offset to request_firmware_into_buf Scott Branden
2020-02-20 1:22 ` Luis Chamberlain
2020-02-21 0:14 ` Scott Branden
2020-02-20 0:48 ` [PATCH v2 3/7] test_firmware: add partial read support for request_firmware_into_buf Scott Branden
2020-02-20 8:42 ` Dan Carpenter
2020-02-21 18:30 ` Scott Branden
2020-02-22 1:13 ` Scott Branden
2020-02-24 8:08 ` Dan Carpenter
2020-02-25 19:11 ` Luis Chamberlain
2020-02-20 0:48 ` [PATCH v2 4/7] firmware: test partial file reads of request_firmware_into_buf Scott Branden
2020-02-20 0:48 ` [PATCH v2 5/7] bcm-vk: add bcm_vk UAPI Scott Branden
2020-02-20 7:50 ` Greg Kroah-Hartman
2020-02-21 1:15 ` Scott Branden
2020-02-21 8:34 ` Arnd Bergmann
2020-02-21 18:27 ` Scott Branden
2020-02-21 9:22 ` Greg Kroah-Hartman
2020-02-20 0:48 ` [PATCH v2 6/7] misc: bcm-vk: add Broadcom VK driver Scott Branden
2020-02-20 1:04 ` Randy Dunlap
2020-02-21 0:06 ` Scott Branden
2020-02-21 0:21 ` Randy Dunlap
2020-02-20 7:47 ` Greg Kroah-Hartman
2020-02-21 18:19 ` Scott Branden
2020-02-22 8:02 ` Arnd Bergmann
2020-02-23 10:00 ` Greg Kroah-Hartman
2020-02-23 23:55 ` Olof Johansson
2020-02-25 22:37 ` Scott Branden [this message]
2020-02-20 10:43 ` Dan Carpenter
2020-02-21 18:29 ` Scott Branden
2020-04-17 21:49 ` Scott Branden
2020-04-18 11:45 ` Dan Carpenter
2020-04-18 11:47 ` Dan Carpenter
2020-04-18 17:25 ` Scott Branden
2020-02-22 16:44 ` kbuild test robot
2020-02-22 16:44 ` [RFC PATCH] misc: bcm-vk: image_tab can be static kbuild test robot
2020-02-20 0:48 ` [PATCH v2 7/7] MAINTAINERS: bcm-vk: add maintainer for Broadcom VK Driver Scott Branden
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--subject='Re: [PATCH v2 6/7] misc: bcm-vk: add Broadcom VK driver' \
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).