LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Prasad Malisetty <pmaliset@codeaurora.org>
To: Matthias Kaehlcke <mka@chromium.org>
Cc: agross@kernel.org, bjorn.andersson@linaro.org,
	bhelgaas@google.com, robh+dt@kernel.org, swboyd@chromium.org,
	lorenzo.pieralisi@arm.com, svarbanov@mm-sol.com,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	dianders@chromium.org, vbadigan@codeaurora.org,
	sallenki@codeaurora.org
Subject: Re: [PATCH v4 2/4] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes
Date: Tue, 17 Aug 2021 13:35:02 +0530	[thread overview]
Message-ID: <d456e200f9ddd4ad0b03c331d3d74db4@codeaurora.org> (raw)
In-Reply-To: <YQhGRB3wBgQ1Kw9E@google.com>

On 2021-08-03 00:53, Matthias Kaehlcke wrote:
> On Fri, Jul 16, 2021 at 07:28:45PM +0530, Prasad Malisetty wrote:
>> Add PCIe controller and PHY nodes for sc7280 SOC.
>> 
>> Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
>> ---
>>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 125 
>> +++++++++++++++++++++++++++++++++++
>>  1 file changed, 125 insertions(+)
>> 
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> index a8c274a..06baf88 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> @@ -15,6 +15,7 @@
>>  #include <dt-bindings/reset/qcom,sdm845-pdc.h>
>>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>>  #include <dt-bindings/thermal/thermal.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> 
>>  / {
>>  	interrupt-parent = <&intc>;
>> @@ -546,6 +547,118 @@
>>  			#power-domain-cells = <1>;
>>  		};
>> 
>> +		pcie1: pci@1c08000 {
>> +			compatible = "qcom,pcie-sc7280", "qcom,pcie-sm8250", 
>> "snps,dw-pcie";
>> +			reg = <0 0x01c08000 0 0x3000>,
>> +			      <0 0x40000000 0 0xf1d>,
>> +			      <0 0x40000f20 0 0xa8>,
>> +			      <0 0x40001000 0 0x1000>,
>> +			      <0 0x40100000 0 0x100000>;
>> +
>> +			reg-names = "parf", "dbi", "elbi", "atu", "config";
>> +			device_type = "pci";
>> +			linux,pci-domain = <1>;
>> +			bus-range = <0x00 0xff>;
>> +			num-lanes = <2>;
>> +
>> +			#address-cells = <3>;
>> +			#size-cells = <2>;
>> +
>> +			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
>> +				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
>> +
>> +			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
>> +			interrupt-names = "msi";
>> +			#interrupt-cells = <1>;
>> +			interrupt-map-mask = <0 0 0 0x7>;
>> +			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>,
>> +					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>,
>> +					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>,
>> +					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> +			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
>> +				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
>> +				 <&pcie1_lane 0>,
>> +				 <&rpmhcc RPMH_CXO_CLK>,
>> +				 <&gcc GCC_PCIE_1_AUX_CLK>,
>> +				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
>> +				 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
>> +				 <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
>> +				 <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
>> +				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
>> +				 <&gcc GCC_DDRSS_PCIE_SF_CLK>;
>> +
>> +			clock-names = "pipe",
>> +				      "pipe_mux",
>> +				      "phy_pipe",
>> +				      "ref",
>> +				      "aux",
>> +				      "cfg",
>> +				      "bus_master",
>> +				      "bus_slave",
>> +				      "slave_q2a",
>> +				      "tbu",
>> +				      "ddrss_sf_tbu";
>> +
>> +			assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
>> +			assigned-clock-rates = <19200000>;
>> +
>> +			resets = <&gcc GCC_PCIE_1_BCR>;
>> +			reset-names = "pci";
>> +
>> +			power-domains = <&gcc GCC_PCIE_1_GDSC>;
>> +
>> +			phys = <&pcie1_lane>;
>> +			phy-names = "pciephy";
>> +
>> +			perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
>> +			pinctrl-names = "default";
>> +			pinctrl-0 = <&pcie1_default_state>;
>> +
>> +			iommus = <&apps_smmu 0x1c80 0x1>;
>> +
>> +			iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
>> +				    <0x100 &apps_smmu 0x1c81 0x1>;
>> +
>> +			status = "disabled";
>> +		};
>> +
>> +		pcie1_phy: phy@1c0e000 {
>> +			compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
>> +			reg = <0 0x01c0e000 0 0x1c0>;
>> +			#address-cells = <2>;
>> +			#size-cells = <2>;
>> +			ranges;
>> +			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
>> +				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
>> +				 <&gcc GCC_PCIE_CLKREF_EN>,
>> +				 <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
>> +			clock-names = "aux", "cfg_ahb", "ref", "refgen";
>> +
>> +			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
>> +			reset-names = "phy";
>> +
>> +			assigned-clocks = <&gcc GCC_PCIE1_PHY_RCHNG_CLK>;
>> +			assigned-clock-rates = <100000000>;
>> +
>> +			status = "disabled";
>> +
>> +			pcie1_lane: lanes@1c0e200 {
>> +				reg = <0 0x01c0e200 0 0x170>,
>> +				      <0 0x01c0e400 0 0x200>,
>> +				      <0 0x01c0ea00 0 0x1f0>,
>> +				      <0 0x01c0e600 0 0x170>,
>> +				      <0 0x01c0e800 0 0x200>,
>> +				      <0 0x01c0ee00 0 0xf4>;
>> +				clocks = <&rpmhcc RPMH_CXO_CLK>;
>> +				clock-names = "pipe0";
>> +
>> +				#phy-cells = <0>;
>> +				#clock-cells = <1>;
>> +				clock-output-names = "pcie_1_pipe_clk";
>> +			};
>> +		};
>> +
>>  		stm@6002000 {
>>  			compatible = "arm,coresight-stm", "arm,primecell";
>>  			reg = <0 0x06002000 0 0x1000>,
>> @@ -1185,6 +1298,18 @@
>>  				pins = "gpio46", "gpio47";
>>  				function = "qup13";
>>  			};
>> +
>> +			pcie1_default_state: pcie1-default-state {
>> +				clkreq {
>> +					pins = "gpio79";
>> +					function = "pcie1_clkreqn";
>> +				};
>> +
>> +				wake-n {
>> +					pins = "gpio3";
>> +					function = "gpio";
>> +				};
> 
> This could be essentially any GPIO, right? Does it really make sense to
> have this node in the SoC file? I would say it belongs in the board 
> file.

Hi Matthias,

Thanks for your review and comments.

Sorry for the delay in acknowledging. I would move this entry in IDP 
file in next version.

Thanks
-Prasad

  reply	other threads:[~2021-08-17  8:05 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-16 13:58 [PATCH v4 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280 Prasad Malisetty
2021-07-16 13:58 ` [PATCH v4 1/4] dt-bindings: pci: qcom: Document PCIe bindings for SC720 Prasad Malisetty
2021-07-16 19:27   ` Stephen Boyd
2021-07-20  6:56     ` Prasad Malisetty
2021-07-16 13:58 ` [PATCH v4 2/4] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes Prasad Malisetty
2021-07-16 19:31   ` Stephen Boyd
2021-07-20  6:54     ` Prasad Malisetty
2021-08-02 19:23   ` Matthias Kaehlcke
2021-08-17  8:05     ` Prasad Malisetty [this message]
2021-07-16 13:58 ` [PATCH v4 3/4] arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board Prasad Malisetty
2021-07-16 19:32   ` Stephen Boyd
2021-07-20  6:57     ` Prasad Malisetty
2021-07-16 13:58 ` [PATCH v4 4/4] PCIe: qcom: Add support to control pipe clk src Prasad Malisetty
2021-07-16 15:06   ` Bjorn Helgaas
2021-07-16 20:38     ` Bjorn Andersson
2021-07-20 11:28       ` Prasad Malisetty
2021-08-09 17:09       ` Prasad Malisetty
2021-07-16 19:37   ` Stephen Boyd
2021-07-16 20:31     ` Bjorn Andersson
2021-07-16 21:39       ` Stephen Boyd
2021-07-16 22:11         ` Bjorn Andersson
2021-07-16 14:29 ` [PATCH v4 0/4] Add DT bindings and DT nodes for PCIe and PHY in SC7280 Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d456e200f9ddd4ad0b03c331d3d74db4@codeaurora.org \
    --to=pmaliset@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mka@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=sallenki@codeaurora.org \
    --cc=svarbanov@mm-sol.com \
    --cc=swboyd@chromium.org \
    --cc=vbadigan@codeaurora.org \
    --subject='Re: [PATCH v4 2/4] arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).