LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Alex G." <mr.nuke.me@gmail.com>
To: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Rob Herring <robh+dt@kernel.org>,
	Andrzej Hajda <a.hajda@samsung.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@siol.net>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	Mark Brown <broonie@kernel.org>,
	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 1/2] drm/bridge: sii902x: Enable I/O and core VCC supplies if present
Date: Mon, 19 Oct 2020 20:24:40 -0500	[thread overview]
Message-ID: <d74c7626-8f16-db85-c23f-79bf0cc400d0@gmail.com> (raw)
In-Reply-To: <20200928173056.1674274-1-mr.nuke.me@gmail.com>

On 9/28/20 12:30 PM, Alexandru Gagniuc wrote:
> On the SII9022, the IOVCC and CVCC12 supplies must reach the correct
> voltage before the reset sequence is initiated. On most boards, this
> assumption is true at boot-up, so initialization succeeds.
> 
> However, when we try to initialize the chip with incorrect supply
> voltages, it will not respond to I2C requests. sii902x_probe() fails
> with -ENXIO.
> 
> To resolve this, look for the "iovcc" and "cvcc12" regulators, and
> make sure they are enabled before starting the reset sequence. If
> these supplies are not available in devicetree, then they will default
> to dummy-regulator. In that case everything will work like before.
> 
> This was observed on a STM32MP157C-DK2 booting in u-boot falcon mode.
> On this board, the supplies would be set by the second stage
> bootloader, which does not run in falcon mode.
> 
> Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
> ---
> Changes since v1:
>    * Fix return code after regulator_enable(sii902x->iovcc) fails (Fabio Estevam)
>    * Use dev_err_probe() instead of dev_err() where appropriate (Sam Ravnborg)
> 
>   drivers/gpu/drm/bridge/sii902x.c | 54 ++++++++++++++++++++++++++++----
>   1 file changed, 48 insertions(+), 6 deletions(-)

This patch seems to have entered fall dormancy. Did I miss somebody in 
the CC field?

Alex


> diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
> index 33fd33f953ec..d15e9f2c0d8a 100644
> --- a/drivers/gpu/drm/bridge/sii902x.c
> +++ b/drivers/gpu/drm/bridge/sii902x.c
> @@ -17,6 +17,7 @@
>   #include <linux/i2c.h>
>   #include <linux/module.h>
>   #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>   #include <linux/clk.h>
>   
>   #include <drm/drm_atomic_helper.h>
> @@ -168,6 +169,8 @@ struct sii902x {
>   	struct drm_connector connector;
>   	struct gpio_desc *reset_gpio;
>   	struct i2c_mux_core *i2cmux;
> +	struct regulator *iovcc;
> +	struct regulator *cvcc12;
>   	/*
>   	 * Mutex protects audio and video functions from interfering
>   	 * each other, by keeping their i2c command sequences atomic.
> @@ -954,13 +957,13 @@ static const struct drm_bridge_timings default_sii902x_timings = {
>   		 | DRM_BUS_FLAG_DE_HIGH,
>   };
>   
> +static int sii902x_init(struct sii902x *sii902x);
> +
>   static int sii902x_probe(struct i2c_client *client,
>   			 const struct i2c_device_id *id)
>   {
>   	struct device *dev = &client->dev;
> -	unsigned int status = 0;
>   	struct sii902x *sii902x;
> -	u8 chipid[4];
>   	int ret;
>   
>   	ret = i2c_check_functionality(client->adapter,
> @@ -989,6 +992,43 @@ static int sii902x_probe(struct i2c_client *client,
>   
>   	mutex_init(&sii902x->mutex);
>   
> +	sii902x->iovcc = devm_regulator_get(dev, "iovcc");
> +	if (IS_ERR(sii902x->iovcc))
> +		return PTR_ERR(sii902x->iovcc);
> +
> +	sii902x->cvcc12 = devm_regulator_get(dev, "cvcc12");
> +	if (IS_ERR(sii902x->cvcc12))
> +		return PTR_ERR(sii902x->cvcc12);
> +
> +	ret = regulator_enable(sii902x->iovcc);
> +	if (ret < 0) {
> +		dev_err_probe(dev, ret, "Failed to enable iovcc supply");
> +		return ret;
> +	}
> +
> +	ret = regulator_enable(sii902x->cvcc12);
> +	if (ret < 0) {
> +		dev_err_probe(dev, ret, "Failed to enable cvcc12 supply");
> +		regulator_disable(sii902x->iovcc);
> +		return ret;
> +	}
> +
> +	ret = sii902x_init(sii902x);
> +	if (ret < 0) {
> +		regulator_disable(sii902x->cvcc12);
> +		regulator_disable(sii902x->iovcc);
> +	}
> +
> +	return ret;
> +}
> +
> +static int sii902x_init(struct sii902x *sii902x)
> +{
> +	struct device *dev = &sii902x->i2c->dev;
> +	unsigned int status = 0;
> +	u8 chipid[4];
> +	int ret;
> +
>   	sii902x_reset(sii902x);
>   
>   	ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0);
> @@ -1012,11 +1052,11 @@ static int sii902x_probe(struct i2c_client *client,
>   	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
>   	regmap_write(sii902x->regmap, SII902X_INT_STATUS, status);
>   
> -	if (client->irq > 0) {
> +	if (sii902x->i2c->irq > 0) {
>   		regmap_write(sii902x->regmap, SII902X_INT_ENABLE,
>   			     SII902X_HOTPLUG_EVENT);
>   
> -		ret = devm_request_threaded_irq(dev, client->irq, NULL,
> +		ret = devm_request_threaded_irq(dev, sii902x->i2c->irq, NULL,
>   						sii902x_interrupt,
>   						IRQF_ONESHOT, dev_name(dev),
>   						sii902x);
> @@ -1031,9 +1071,9 @@ static int sii902x_probe(struct i2c_client *client,
>   
>   	sii902x_audio_codec_init(sii902x, dev);
>   
> -	i2c_set_clientdata(client, sii902x);
> +	i2c_set_clientdata(sii902x->i2c, sii902x);
>   
> -	sii902x->i2cmux = i2c_mux_alloc(client->adapter, dev,
> +	sii902x->i2cmux = i2c_mux_alloc(sii902x->i2c->adapter, dev,
>   					1, 0, I2C_MUX_GATE,
>   					sii902x_i2c_bypass_select,
>   					sii902x_i2c_bypass_deselect);
> @@ -1051,6 +1091,8 @@ static int sii902x_remove(struct i2c_client *client)
>   
>   	i2c_mux_del_adapters(sii902x->i2cmux);
>   	drm_bridge_remove(&sii902x->bridge);
> +	regulator_disable(sii902x->cvcc12);
> +	regulator_disable(sii902x->iovcc);
>   
>   	return 0;
>   }
> 

  parent reply	other threads:[~2020-10-20  1:24 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-24 20:05 [PATCH " Alexandru Gagniuc
2020-09-24 20:05 ` [PATCH 2/2] dt-bindings: display: sii902x: Add supply bindings Alexandru Gagniuc
2020-09-26 18:42   ` Sam Ravnborg
2020-09-24 20:22 ` [PATCH 1/2] drm/bridge: sii902x: Enable I/O and core VCC supplies if present Fabio Estevam
2020-09-24 20:34   ` Alex G.
2020-09-26 18:49 ` Sam Ravnborg
2020-09-28 17:35   ` Alex G.
2020-09-28 19:03     ` Sam Ravnborg
2020-09-28 17:30 ` [PATCH v2 " Alexandru Gagniuc
2020-09-28 17:30   ` [PATCH v2 2/2] dt-bindings: display: sii902x: Add supply bindings Alexandru Gagniuc
2020-09-29 20:17     ` Rob Herring
2020-10-20  1:24   ` Alex G. [this message]
2020-10-20  7:16     ` [PATCH v2 1/2] drm/bridge: sii902x: Enable I/O and core VCC supplies if present Sam Ravnborg
2020-10-20 14:01       ` Alex G.
2020-10-20 15:08         ` Sam Ravnborg
2020-10-20 22:14   ` [PATCH v3 1/3] drm/bridge: sii902x: Refactor init code into separate function Alexandru Gagniuc
2020-10-20 22:14   ` [PATCH v3 2/3] drm/bridge: sii902x: Enable I/O and core VCC supplies if present Alexandru Gagniuc
2020-11-08 10:55     ` Sam Ravnborg
2020-10-20 22:14   ` [PATCH v3 3/3] dt-bindings: display: sii902x: Add supply bindings Alexandru Gagniuc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d74c7626-8f16-db85-c23f-79bf0cc400d0@gmail.com \
    --to=mr.nuke.me@gmail.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=broonie@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jernej.skrabec@siol.net \
    --cc=jonas@kwiboo.se \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mchehab+huawei@kernel.org \
    --cc=narmstrong@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=tsbogend@alpha.franken.de \
    --subject='Re: [PATCH v2 1/2] drm/bridge: sii902x: Enable I/O and core VCC supplies if present' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).