LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: David Hildenbrand <david@redhat.com>
To: Pierre Morel <pmorel@linux.ibm.com>, kvm@vger.kernel.org
Cc: linux-s390@vger.kernel.org, linux-kernel@vger.kernel.org,
	borntraeger@de.ibm.com, frankja@linux.ibm.com, cohuck@redhat.com,
	thuth@redhat.com, imbrenda@linux.ibm.com, hca@linux.ibm.com,
	gor@linux.ibm.com
Subject: Re: [PATCH v3 2/3] s390x: KVM: Implementation of Multiprocessor Topology-Change-Report
Date: Mon, 6 Sep 2021 20:37:35 +0200	[thread overview]
Message-ID: <d85a6998-0f86-44d9-4eae-3051b65c2b4e@redhat.com> (raw)
In-Reply-To: <1627979206-32663-3-git-send-email-pmorel@linux.ibm.com>

On 03.08.21 10:26, Pierre Morel wrote:
> We let the userland hypervisor know if the machine support the CPU
> topology facility using a new KVM capability: KVM_CAP_S390_CPU_TOPOLOGY.
> 
> The PTF instruction will report a topology change if there is any change
> with a previous STSI_15_2 SYSIB.
> Changes inside a STSI_15_2 SYSIB occur if CPU bits are set or clear
> inside the CPU Topology List Entry CPU mask field, which happens with
> changes in CPU polarization, dedication, CPU types and adding or
> removing CPUs in a socket.
> 
> The reporting to the guest is done using the Multiprocessor
> Topology-Change-Report (MTCR) bit of the utility entry of the guest's
> SCA which will be cleared during the interpretation of PTF.
> 
> To check if the topology has been modified we use a new field of the
> arch vCPU to save the previous real CPU ID at the end of a schedule
> and verify on next schedule that the CPU used is in the same socket.
> 
> We deliberatly ignore:
> - polarization: only horizontal polarization is currently used in linux.
> - CPU Type: only IFL Type are supported in Linux
> - Dedication: we consider that only a complete dedicated CPU stack can
>    take benefit of the CPU Topology.
> 
> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>


> @@ -228,7 +232,7 @@ struct kvm_s390_sie_block {
>   	__u8	icptcode;		/* 0x0050 */
>   	__u8	icptstatus;		/* 0x0051 */
>   	__u16	ihcpu;			/* 0x0052 */
> -	__u8	reserved54;		/* 0x0054 */
> +	__u8	mtcr;			/* 0x0054 */
>   #define IICTL_CODE_NONE		 0x00
>   #define IICTL_CODE_MCHK		 0x01
>   #define IICTL_CODE_EXT		 0x02
> @@ -246,6 +250,7 @@ struct kvm_s390_sie_block {
>   #define ECB_TE		0x10
>   #define ECB_SRSI	0x04
>   #define ECB_HOSTPROTINT	0x02
> +#define ECB_PTF		0x01

 From below I understand, that ECB_PTF can be used with stfl(11) in the 
hypervisor.

What is to happen if the hypervisor doesn't support stfl(11) and we 
consequently cannot use ECB_PTF? Will QEMU be able to emulate PTF fully?


>   	__u8	ecb;			/* 0x0061 */
>   #define ECB2_CMMA	0x80
>   #define ECB2_IEP	0x20
> @@ -747,6 +752,7 @@ struct kvm_vcpu_arch {
>   	bool skey_enabled;
>   	struct kvm_s390_pv_vcpu pv;
>   	union diag318_info diag318_info;
> +	int prev_cpu;
>   };
>   
>   struct kvm_vm_stat {
> diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
> index b655a7d82bf0..ff6d8a2b511c 100644
> --- a/arch/s390/kvm/kvm-s390.c
> +++ b/arch/s390/kvm/kvm-s390.c
> @@ -568,6 +568,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
>   	case KVM_CAP_S390_VCPU_RESETS:
>   	case KVM_CAP_SET_GUEST_DEBUG:
>   	case KVM_CAP_S390_DIAG318:
> +	case KVM_CAP_S390_CPU_TOPOLOGY:

I would have expected instead

r = test_facility(11);
break

...

>   		r = 1;
>   		break;
>   	case KVM_CAP_SET_GUEST_DEBUG2:
> @@ -819,6 +820,23 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm, struct kvm_enable_cap *cap)
>   		icpt_operexc_on_all_vcpus(kvm);
>   		r = 0;
>   		break;
> +	case KVM_CAP_S390_CPU_TOPOLOGY:
> +		mutex_lock(&kvm->lock);
> +		if (kvm->created_vcpus) {
> +			r = -EBUSY;
> +		} else {

...
} else if (test_facility(11)) {
	set_kvm_facility(kvm->arch.model.fac_mask, 11);
	set_kvm_facility(kvm->arch.model.fac_list, 11);
	r = 0;
} else {
	r = -EINVAL;
}

similar to how we handle KVM_CAP_S390_VECTOR_REGISTERS.

But I assume you want to be able to support hosts without ECB_PTF, correct?


> +			set_kvm_facility(kvm->arch.model.fac_mask, 11);
> +			set_kvm_facility(kvm->arch.model.fac_list, 11);
> +			r = 0;
> +		}
> +		mutex_unlock(&kvm->lock);
> +		VM_EVENT(kvm, 3, "ENABLE: CPU TOPOLOGY %s",
> +			 r ? "(not available)" : "(success)");
> +		break;
> +
> +		r = -EINVAL;
> +		break;

^ dead code

[...]

>   }
>   
>   void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
>   {
> +	vcpu->arch.prev_cpu = vcpu->cpu;
>   	vcpu->cpu = -1;
>   	if (vcpu->arch.cputm_enabled && !is_vcpu_idle(vcpu))
>   		__stop_cpu_timer_accounting(vcpu);
> @@ -3198,6 +3239,11 @@ static int kvm_s390_vcpu_setup(struct kvm_vcpu *vcpu)
>   		vcpu->arch.sie_block->ecb |= ECB_HOSTPROTINT;
>   	if (test_kvm_facility(vcpu->kvm, 9))
>   		vcpu->arch.sie_block->ecb |= ECB_SRSI;
> +
> +	/* PTF needs both host and guest facilities to enable interpretation */
> +	if (test_kvm_facility(vcpu->kvm, 11) && test_facility(11))
> +		vcpu->arch.sie_block->ecb |= ECB_PTF;

Here you say we need both ...

> +
>   	if (test_kvm_facility(vcpu->kvm, 73))
>   		vcpu->arch.sie_block->ecb |= ECB_TE;
>   
> diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
> index 4002a24bc43a..50d67190bf65 100644
> --- a/arch/s390/kvm/vsie.c
> +++ b/arch/s390/kvm/vsie.c
> @@ -503,6 +503,9 @@ static int shadow_scb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
>   	/* Host-protection-interruption introduced with ESOP */
>   	if (test_kvm_cpu_feat(vcpu->kvm, KVM_S390_VM_CPU_FEAT_ESOP))
>   		scb_s->ecb |= scb_o->ecb & ECB_HOSTPROTINT;
> +	/* CPU Topology */
> +	if (test_kvm_facility(vcpu->kvm, 11))
> +		scb_s->ecb |= scb_o->ecb & ECB_PTF;

but here you don't check?

>   	/* transactional execution */
>   	if (test_kvm_facility(vcpu->kvm, 73) && wants_tx) {
>   		/* remap the prefix is tx is toggled on */
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index d9e4aabcb31a..081ce0cd44b9 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -1112,6 +1112,7 @@ struct kvm_ppc_resize_hpt {
>   #define KVM_CAP_BINARY_STATS_FD 203
>   #define KVM_CAP_EXIT_ON_EMULATION_FAILURE 204
>   #define KVM_CAP_ARM_MTE 205
> +#define KVM_CAP_S390_CPU_TOPOLOGY 206
>   

We'll need a Documentation/virt/kvm/api.rst description.

I'm not completely confident that the way we're handling the 
capability+facility is the right approach. It all feels a bit suboptimal.

Except stfl(74) -- STHYI --, we never enable a facility via 
set_kvm_facility() that's not available in the host. And STHYI is 
special such that it is never implemented in hardware.

I'll think about what might be cleaner once I get some more details 
about the interaction with stfl(11) in the hypervisor.

-- 
Thanks,

David / dhildenb


  parent reply	other threads:[~2021-09-06 18:37 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-03  8:26 [PATCH v3 0/3] s390x: KVM: CPU Topology Pierre Morel
2021-08-03  8:26 ` [PATCH v3 1/3] s390x: KVM: accept STSI for CPU topology information Pierre Morel
2021-08-31 13:59   ` David Hildenbrand
2021-09-01  9:43     ` Pierre Morel
2021-09-06 18:14       ` David Hildenbrand
2021-09-07 10:11         ` Pierre Morel
2021-08-03  8:26 ` [PATCH v3 2/3] s390x: KVM: Implementation of Multiprocessor Topology-Change-Report Pierre Morel
2021-08-31 14:03   ` David Hildenbrand
2021-09-01  9:46     ` Pierre Morel
2021-09-06 18:37   ` David Hildenbrand [this message]
2021-09-07 10:24     ` Pierre Morel
2021-09-08  7:04       ` Christian Borntraeger
2021-09-08 12:00         ` Pierre Morel
2021-09-08 12:01           ` Christian Borntraeger
2021-09-08 12:52             ` Pierre Morel
2021-09-07 12:28     ` Pierre Morel
2021-09-08  7:07       ` Christian Borntraeger
2021-09-08 13:09         ` Pierre Morel
2021-09-08 13:16           ` Christian Borntraeger
2021-09-08 14:17             ` Pierre Morel
2021-09-09  9:03     ` Pierre Morel
2021-08-03  8:26 ` [PATCH v3 3/3] s390x: optimization of the check for CPU topology change Pierre Morel
2021-08-03  8:42   ` Heiko Carstens
2021-08-03  8:57     ` Pierre Morel
2021-08-03  9:28       ` Pierre Morel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d85a6998-0f86-44d9-4eae-3051b65c2b4e@redhat.com \
    --to=david@redhat.com \
    --cc=borntraeger@de.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=frankja@linux.ibm.com \
    --cc=gor@linux.ibm.com \
    --cc=hca@linux.ibm.com \
    --cc=imbrenda@linux.ibm.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=pmorel@linux.ibm.com \
    --cc=thuth@redhat.com \
    --subject='Re: [PATCH v3 2/3] s390x: KVM: Implementation of Multiprocessor Topology-Change-Report' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).