Re: [PATCH v3 0/4] mmc: pwrseq: sd8787: add support wilc1000 devices

[Nicolas Ferre <nicolas.ferre@microchip.com>]

On 24/08/2021 at 16:56, Ulf Hansson wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On Fri, 20 Aug 2021 at 11:30, Claudiu Beznea
> <claudiu.beznea@microchip.com> wrote:
>>
>> Hi,
>>
>> This series adds support for WILC1000 devices on pwrseq-sd8787 driver.
>> WILC1000 devices needs a minimum delay of 5ms b/w reset and power lines.
>> Adapt the sd8787 driver for this by adding a new compatible for WILC1000
>> devices and specify the delay on .data field of struct of_device_id.
>>
>> Thank you,
>> Claudiu Beznea
>>
>> Changes in v3:
>> - fixed dt binding compilation
>>
>> Changes in v2:
>> - changed cover letter title (it was: mmc: pwrseq: sd8787: add support
>>    for selectable)
>> - use new compatible in pwrseq-sd8787 driver instead of adding a new
>>    binding for specifying the delay; with this, the patch 1/1 from v1 is
>>    not necessary
>> - adapt patch 3/3 from this version with the new compatible
>>
>>
>> Claudiu Beznea (3):
>>    dt-bindings: pwrseq-sd8787: add binding for wilc1000
>>    mmc: pwrseq: sd8787: add support for wilc1000
>>    mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787
>>
>> Eugen Hristev (1):
>>    ARM: dts: at91: sama5d27_wlsom1: add wifi device
>>
>>   .../bindings/mmc/mmc-pwrseq-sd8787.yaml       |  4 +-
>>   arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi   | 71 +++++++++++++++++++
>>   drivers/mmc/core/Kconfig                      |  2 +-
>>   drivers/mmc/core/pwrseq_sd8787.c              | 11 ++-
>>   4 files changed, 84 insertions(+), 4 deletions(-)
>>
> 
> Applied patch1 -> patch3, thanks! I leave patch 4 for soc maintainers.

Perfect, we take care of patch 4 through at91 -> arm-soc trees for 5.16 
kernel timeframe.

Best regards,
   Nicolas


-- 
Nicolas Ferre