LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>,
	linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v1 14/15] powerpc/kuap: Wire-up KUAP on book3e/64
Date: Wed,  6 Oct 2021 14:43:47 +0200	[thread overview]
Message-ID: <d8d87ef874fa9810c38c105c6662fef334d9ae73.1633523837.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1633523837.git.christophe.leroy@csgroup.eu>

This adds KUAP support to book3e/64.
This is done by reading the content of SPRN_MAS1 and checking
the TID at the time user pgtable is loaded.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 arch/powerpc/mm/nohash/tlb_low_64e.S   | 40 ++++++++++++++++++++++----
 arch/powerpc/platforms/Kconfig.cputype |  1 +
 2 files changed, 35 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/mm/nohash/tlb_low_64e.S b/arch/powerpc/mm/nohash/tlb_low_64e.S
index bf24451f3e71..b43524ca2b95 100644
--- a/arch/powerpc/mm/nohash/tlb_low_64e.S
+++ b/arch/powerpc/mm/nohash/tlb_low_64e.S
@@ -128,6 +128,13 @@ END_BTB_FLUSH_SECTION
 
 	bne	tlb_miss_kernel_bolted
 
+tlb_miss_user_bolted:
+#ifdef CONFIG_PPC_KUAP
+	mfspr	r10,SPRN_MAS1
+	rlwinm.	r10,r10,0,0x3fff0000
+	beq-	tlb_miss_fault_bolted /* KUAP fault */
+#endif
+
 tlb_miss_common_bolted:
 /*
  * This is the guts of the TLB miss handler for bolted-linear.
@@ -246,7 +253,7 @@ itlb_miss_fault_bolted:
 
 	cmpldi	cr0,r15,0			/* Check for user region */
 	oris	r11,r11,_PAGE_ACCESSED@h
-	beq	tlb_miss_common_bolted
+	beq	tlb_miss_user_bolted
 	b	itlb_miss_kernel_bolted
 
 #ifdef CONFIG_PPC_FSL_BOOK3E
@@ -676,6 +683,11 @@ finish_normal_tlb_miss:
 	/* Check if required permissions are met */
 	andc.	r15,r11,r14
 	bne-	normal_tlb_miss_access_fault
+#ifdef CONFIG_PPC_KUAP
+	mfspr	r11,SPRN_MAS1
+	rlwinm.	r10,r11,0,0x3fff0000
+	beq-	normal_tlb_miss_access_fault /* KUAP fault */
+#endif
 
 	/* Now we build the MAS:
 	 *
@@ -689,15 +701,17 @@ finish_normal_tlb_miss:
 	 *
 	 * TODO: mix up code below for better scheduling
 	 */
-	clrrdi	r11,r16,12		/* Clear low crap in EA */
-	rlwimi	r11,r14,32-19,27,31	/* Insert WIMGE */
-	mtspr	SPRN_MAS2,r11
+	clrrdi	r10,r16,12		/* Clear low crap in EA */
+	rlwimi	r10,r14,32-19,27,31	/* Insert WIMGE */
+	mtspr	SPRN_MAS2,r10
 
 	/* Check page size, if not standard, update MAS1 */
-	rldicl	r11,r14,64-8,64-8
-	cmpldi	cr0,r11,BOOK3E_PAGESZ_4K
+	rldicl	r10,r14,64-8,64-8
+	cmpldi	cr0,r10,BOOK3E_PAGESZ_4K
 	beq-	1f
+#ifndef CONFIG_PPC_KUAP
 	mfspr	r11,SPRN_MAS1
+#endif
 	rlwimi	r11,r14,31,21,24
 	rlwinm	r11,r11,0,21,19
 	mtspr	SPRN_MAS1,r11
@@ -786,7 +800,16 @@ virt_page_table_tlb_miss:
 	mfspr	r10,SPRN_MAS1
 	rlwinm	r10,r10,0,16,1			/* Clear TID */
 	mtspr	SPRN_MAS1,r10
+#ifdef CONFIG_PPC_KUAP
+	b	2f
+1:
+	mfspr	r10,SPRN_MAS1
+	rlwinm.	r10,r10,0,0x3fff0000
+	beq-	virt_page_table_tlb_miss_fault /* KUAP fault */
+2:
+#else
 1:
+#endif
 BEGIN_MMU_FTR_SECTION
 	/* Search if we already have a TLB entry for that virtual address, and
 	 * if we do, bail out.
@@ -1027,6 +1050,11 @@ virt_page_table_tlb_miss_whacko_fault:
  * avoid too much complication, it will save/restore things for us
  */
 htw_tlb_miss:
+#ifdef CONFIG_PPC_KUAP
+	mfspr	r10,SPRN_MAS1
+	rlwinm.	r10,r10,0,0x3fff0000
+	beq-	htw_tlb_miss_fault /* KUAP fault */
+#endif
 	/* Search if we already have a TLB entry for that virtual address, and
 	 * if we do, bail out.
 	 *
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 8152eeba8572..bd10e176355b 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -118,6 +118,7 @@ config PPC_BOOK3E_64
 	select PPC_SMP_MUXED_IPI
 	select PPC_DOORBELL
 	select ZONE_DMA
+	select PPC_HAVE_KUAP
 
 endchoice
 
-- 
2.31.1


  parent reply	other threads:[~2021-10-06 12:48 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-06 12:43 [PATCH v1 00/15] powerpc: Add KUAP support for BOOKE and 40x Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 01/15] powerpc/32s: Do kuep_lock() and kuep_unlock() in assembly Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 02/15] powerpc/32s: Save content of sr0 to avoid 'mfsr' Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 03/15] powerpc/kuap: Add a generic intermediate layer Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 04/15] powerpc/kuap: Check KUAP activation in generic functions Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 05/15] powerpc/kuap: Remove __kuap_assert_locked() Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 06/15] powerpc/kuap: Add kuap_lock() Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 07/15] powerpc/nohash: Move setup_kuap out of 8xx.c Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 08/15] powerpc/config: Add CONFIG_BOOKE_OR_40x Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 09/15] powerpc/kuap: Prepare for supporting KUAP on BOOK3E/64 Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 10/15] powerpc: Add KUAP support for BOOKE and 40x Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 11/15] powerpc/kuap: Wire-up KUAP on 44x Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 12/15] powerpc/kuap: Wire-up KUAP on 40x Christophe Leroy
2021-10-06 12:43 ` [PATCH v1 13/15] powerpc/kuap: Wire-up KUAP on 85xx in 32 bits mode Christophe Leroy
2021-10-06 12:43 ` Christophe Leroy [this message]
2021-10-06 12:43 ` [PATCH v1 15/15] powerpc: Remove CONFIG_PPC_HAVE_KUAP Christophe Leroy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d8d87ef874fa9810c38c105c6662fef334d9ae73.1633523837.git.christophe.leroy@csgroup.eu \
    --to=christophe.leroy@csgroup.eu \
    --cc=benh@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    --subject='Re: [PATCH v1 14/15] powerpc/kuap: Wire-up KUAP on book3e/64' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).