LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Schrempf Frieder <frieder.schrempf@kontron.de>
To: Jeff Kletsky <lede@allycomm.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	"David Woodhouse" <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Vignesh Raghavendra <vigneshr@ti.com>
Cc: "linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
	"Jeff Kletsky" <git-commits@allycomm.com>,
	kbuild test robot <lkp@intel.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
Date: Thu, 23 May 2019 06:42:28 +0000	[thread overview]
Message-ID: <e438022f-3444-9aae-adac-2dd3dd0071b7@kontron.de> (raw)
In-Reply-To: <20190522220555.11626-4-lede@allycomm.com>

On 23.05.19 00:05, Jeff Kletsky wrote:
> From: Jeff Kletsky <git-commits@allycomm.com>
> 
> The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices
> and, while it has the same logical layout as the E-series devices,
> it differs in the SPI interfacing in significant ways.
> 
> This support is contingent on previous commits to:
> 
>    * Add support for two-byte device IDs
>    * Define macros for page-read ops with three-byte addresses
> 
> http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
> 
> Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>

Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>

> 
> Reported-by: kbuild test robot <lkp@intel.com>

I dont't think that this Reported-by tag should be used here. The bot 
reported build errors caused by your patch and you fixed it in a new 
version. As far as I understand this tag, it references someone who 
reported a flaw/bug that led to this change in the first place.
The version history of the changes won't be visible in the git history 
later, but the tag will be and would be rather confusing.

> ---
>   drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++------
>   1 file changed, 64 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
> index e5586390026a..b0c26eb5e8b6 100644
> --- a/drivers/mtd/nand/spi/gigadevice.c
> +++ b/drivers/mtd/nand/spi/gigadevice.c
> @@ -9,11 +9,17 @@
>   #include <linux/mtd/spinand.h>
>   
>   #define SPINAND_MFR_GIGADEVICE			0xC8
> +
>   #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
>   #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
>   
>   #define GD5FXGQ4UEXXG_REG_STATUS2		0xf0
>   
> +#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK		(7 << 4)
> +#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS	(0 << 4)
> +#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS	(1 << 4)
> +#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR	(7 << 4)
> +
>   static SPINAND_OP_VARIANTS(read_cache_variants,
>   		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
>   		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
> @@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
>   		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
>   		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
>   
> +static SPINAND_OP_VARIANTS(read_cache_variants_f,
> +		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
> +		SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
> +
>   static SPINAND_OP_VARIANTS(write_cache_variants,
>   		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
>   		SPINAND_PROG_LOAD(true, 0, NULL, 0));
> @@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section,
>   	return 0;
>   }
>   
> +static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
> +	.ecc = gd5fxgq4xa_ooblayout_ecc,
> +	.free = gd5fxgq4xa_ooblayout_free,
> +};
> +
>   static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
>   					 u8 status)
>   {
> @@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
>   	return -EINVAL;
>   }
>   
> -static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
> +static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
>   				       struct mtd_oob_region *region)
>   {
>   	if (section)
> @@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
>   	return 0;
>   }
>   
> -static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
> +static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
>   					struct mtd_oob_region *region)
>   {
>   	if (section)
> @@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
>   	return 0;
>   }
>   
> +static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
> +	.ecc = gd5fxgq4_variant2_ooblayout_ecc,
> +	.free = gd5fxgq4_variant2_ooblayout_free,
> +};
> +
>   static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
>   					u8 status)
>   {
> @@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
>   	return -EINVAL;
>   }
>   
> -static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
> -	.ecc = gd5fxgq4xa_ooblayout_ecc,
> -	.free = gd5fxgq4xa_ooblayout_free,
> -};
> +static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
> +					u8 status)
> +{
> +	switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) {
> +	case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS:
> +		return 0;
>   
> -static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
> -	.ecc = gd5fxgq4uexxg_ooblayout_ecc,
> -	.free = gd5fxgq4uexxg_ooblayout_free,
> -};
> +	case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS:
> +		return 3;
> +
> +	case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR:
> +		return -EBADMSG;
> +
> +	default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */
> +		return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2;
> +	}
> +
> +	return -EINVAL;
> +}
>   
>   static const struct spinand_info gigadevice_spinand_table[] = {
>   	SPINAND_INFO("GD5F1GQ4xA", 0xF1,
> @@ -195,25 +229,40 @@ static const struct spinand_info gigadevice_spinand_table[] = {
>   					      &write_cache_variants,
>   					      &update_cache_variants),
>   		     0,
> -		     SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
> +		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
>   				     gd5fxgq4uexxg_ecc_get_status)),
> +	SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
> +		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
> +		     NAND_ECCREQ(8, 512),
> +		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
> +					      &write_cache_variants,
> +					      &update_cache_variants),
> +		     0,
> +		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
> +				     gd5fxgq4ufxxg_ecc_get_status)),
>   };
>   
>   static int gigadevice_spinand_detect(struct spinand_device *spinand)
>   {
>   	u8 *id = spinand->id.data;
> +	u16 did;
>   	int ret;
>   
>   	/*
> -	 * For GD NANDs, There is an address byte needed to shift in before IDs
> -	 * are read out, so the first byte in raw_id is dummy.
> +	 * Earlier GDF5-series devices (A,E) return [0][MID][DID]
> +	 * Later (F) devices return [MID][DID1][DID2]
>   	 */
> -	if (id[1] != SPINAND_MFR_GIGADEVICE)
> +
> +	if (id[0] == SPINAND_MFR_GIGADEVICE)
> +		did = (id[1] << 8) + id[2];
> +	else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
> +		did = id[2];
> +	else
>   		return 0;
>   
>   	ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
>   				     ARRAY_SIZE(gigadevice_spinand_table),
> -				     id[2]);
> +				     did);
>   	if (ret)
>   		return ret;
>   
> 

  reply	other threads:[~2019-05-23  6:42 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-22 22:05 [PATCH v4 0/3] " Jeff Kletsky
2019-05-22 22:05 ` [PATCH v4 1/3] mtd: spinand: Define macros for page-read ops with three-byte addresses Jeff Kletsky
2019-06-03  8:02   ` Miquel Raynal
2019-05-22 22:05 ` [PATCH v4 2/3] mtd: spinand: Add support for two-byte device IDs Jeff Kletsky
2019-06-03  8:02   ` Miquel Raynal
2019-05-22 22:05 ` [PATCH v4 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG Jeff Kletsky
2019-05-23  6:42   ` Schrempf Frieder [this message]
2019-05-24  0:12     ` Jeff Kletsky
2019-05-27  6:35       ` Schrempf Frieder
2019-05-27  9:28         ` Miquel Raynal
2019-06-03  8:02   ` Miquel Raynal
2019-05-23  6:56 ` [PATCH v4 0/3] " Schrempf Frieder

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e438022f-3444-9aae-adac-2dd3dd0071b7@kontron.de \
    --to=frieder.schrempf@kontron.de \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=git-commits@allycomm.com \
    --cc=lede@allycomm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=lkp@intel.com \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=vigneshr@ti.com \
    --subject='Re: [PATCH v4 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).