LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jeff Garzik <jeff@garzik.org>
To: linux-kernel@vger.kernel.org, kkeil@suse.de,
	isdn4linux@listserv.isdn4linux.de
Subject: [PATCH 02/14] [ISDN] Hisax: eliminate many unnecessary references to CardType[]
Date: Wed, 31 Oct 2007 03:42:07 -0400	[thread overview]
Message-ID: <e6fd205c4444928e0f7176c01e914f4d625a50e9.1203031878.git.jeff@garzik.org> (raw)
In-Reply-To: <74fc75b3eadfa82aee70b855e9944b5439a259d5.1203031878.git.jeff@garzik.org>

For the vast majority of CardType[card->typ] uses (but not all!),
the string is constant for each driver.  Therefore, we may replace
CardType[card->typ] with the actual string describing the driver, making
each printk() a bit more simple.

This also has the nice, intended side effect of greatly reducing
external references to hisax global CardType[].  This will be of value
once the ISDN drivers are converted to the ISA/PCI/PNP hotplug APIs.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/isdn/hisax/asuscom.c   |    5 +----
 drivers/isdn/hisax/avm_a1.c    |   27 +++++++++------------------
 drivers/isdn/hisax/bkm_a4t.c   |   19 ++++++++++---------
 drivers/isdn/hisax/bkm_a8.c    |   31 +++++++++++++------------------
 drivers/isdn/hisax/gazel.c     |    5 ++---
 drivers/isdn/hisax/hfc_pci.c   |    2 --
 drivers/isdn/hisax/hfc_sx.c    |    2 --
 drivers/isdn/hisax/isurf.c     |   13 ++++---------
 drivers/isdn/hisax/ix1_micro.c |    9 ++++-----
 drivers/isdn/hisax/mic.c       |    5 +----
 drivers/isdn/hisax/netjet.h    |    2 --
 drivers/isdn/hisax/niccy.c     |   19 ++++++++-----------
 drivers/isdn/hisax/nj_s.c      |    3 +--
 drivers/isdn/hisax/nj_u.c      |    4 ++--
 drivers/isdn/hisax/s0box.c     |   13 ++++---------
 drivers/isdn/hisax/saphir.c    |    8 +++-----
 drivers/isdn/hisax/sportster.c |   11 +++++------
 drivers/isdn/hisax/teleint.c   |    5 +----
 drivers/isdn/hisax/telespci.c  |    5 ++---
 drivers/isdn/hisax/w6692.c     |    2 --
 20 files changed, 70 insertions(+), 120 deletions(-)

diff --git a/drivers/isdn/hisax/asuscom.c b/drivers/isdn/hisax/asuscom.c
index 61e69e9..b96f318 100644
--- a/drivers/isdn/hisax/asuscom.c
+++ b/drivers/isdn/hisax/asuscom.c
@@ -20,8 +20,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
-
 static const char *Asuscom_revision = "$Revision: 1.14.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -376,8 +374,7 @@ setup_asuscom(struct IsdnCard *card)
 	cs->irq = card->para[0];
 	if (!request_region(cs->hw.asus.cfg_reg, bytecnt, "asuscom isdn")) {
 		printk(KERN_WARNING
-		       "HiSax: %s config port %x-%x already in use\n",
-		       CardType[card->typ],
+		       "HiSax: ISDNLink config port %x-%x already in use\n",
 		       cs->hw.asus.cfg_reg,
 		       cs->hw.asus.cfg_reg + bytecnt);
 		return (0);
diff --git a/drivers/isdn/hisax/avm_a1.c b/drivers/isdn/hisax/avm_a1.c
index d9028e9..eb6b432 100644
--- a/drivers/isdn/hisax/avm_a1.c
+++ b/drivers/isdn/hisax/avm_a1.c
@@ -16,7 +16,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
 static const char *avm_revision = "$Revision: 2.15.2.4 $";
 
 #define	 AVM_A1_STAT_ISAC	0x01
@@ -200,16 +199,14 @@ setup_avm_a1(struct IsdnCard *card)
 	cs->irq = card->para[0];
 	if (!request_region(cs->hw.avm.cfg_reg, 8, "avm cfg")) {
 		printk(KERN_WARNING
-		       "HiSax: %s config port %x-%x already in use\n",
-		       CardType[card->typ],
+		       "HiSax: AVM A1 config port %x-%x already in use\n",
 		       cs->hw.avm.cfg_reg,
 		       cs->hw.avm.cfg_reg + 8);
 		return (0);
 	}
 	if (!request_region(cs->hw.avm.isac + 32, 32, "HiSax isac")) {
 		printk(KERN_WARNING
-		       "HiSax: %s isac ports %x-%x already in use\n",
-		       CardType[cs->typ],
+		       "HiSax: AVM A1 isac ports %x-%x already in use\n",
 		       cs->hw.avm.isac + 32,
 		       cs->hw.avm.isac + 64);
 		release_ioregs(cs, 0);
@@ -217,16 +214,14 @@ setup_avm_a1(struct IsdnCard *card)
 	}
 	if (!request_region(cs->hw.avm.isacfifo, 1, "HiSax isac fifo")) {
 		printk(KERN_WARNING
-		       "HiSax: %s isac fifo port %x already in use\n",
-		       CardType[cs->typ],
+		       "HiSax: AVM A1 isac fifo port %x already in use\n",
 		       cs->hw.avm.isacfifo);
 		release_ioregs(cs, 1);
 		return (0);
 	}
 	if (!request_region(cs->hw.avm.hscx[0] + 32, 32, "HiSax hscx A")) {
 		printk(KERN_WARNING
-		       "HiSax: %s hscx A ports %x-%x already in use\n",
-		       CardType[cs->typ],
+		       "HiSax: AVM A1 hscx A ports %x-%x already in use\n",
 		       cs->hw.avm.hscx[0] + 32,
 		       cs->hw.avm.hscx[0] + 64);
 		release_ioregs(cs, 3);
@@ -234,16 +229,14 @@ setup_avm_a1(struct IsdnCard *card)
 	}
 	if (!request_region(cs->hw.avm.hscxfifo[0], 1, "HiSax hscx A fifo")) {
 		printk(KERN_WARNING
-		       "HiSax: %s hscx A fifo port %x already in use\n",
-		       CardType[cs->typ],
+		       "HiSax: AVM A1 hscx A fifo port %x already in use\n",
 		       cs->hw.avm.hscxfifo[0]);
 		release_ioregs(cs, 7);
 		return (0);
 	}
 	if (!request_region(cs->hw.avm.hscx[1] + 32, 32, "HiSax hscx B")) {
 		printk(KERN_WARNING
-		       "HiSax: %s hscx B ports %x-%x already in use\n",
-		       CardType[cs->typ],
+		       "HiSax: AVM A1 hscx B ports %x-%x already in use\n",
 		       cs->hw.avm.hscx[1] + 32,
 		       cs->hw.avm.hscx[1] + 64);
 		release_ioregs(cs, 0xf);
@@ -251,8 +244,7 @@ setup_avm_a1(struct IsdnCard *card)
 	}
 	if (!request_region(cs->hw.avm.hscxfifo[1], 1, "HiSax hscx B fifo")) {
 		printk(KERN_WARNING
-		       "HiSax: %s hscx B fifo port %x already in use\n",
-		       CardType[cs->typ],
+		       "HiSax: AVM A1 hscx B fifo port %x already in use\n",
 		       cs->hw.avm.hscxfifo[1]);
 		release_ioregs(cs, 0x1f);
 		return (0);
@@ -284,9 +276,8 @@ setup_avm_a1(struct IsdnCard *card)
 	printk(KERN_INFO "AVM A1: Byte at %x is %x\n",
 	       cs->hw.avm.cfg_reg, val);
 
-	printk(KERN_INFO
-	       "HiSax: %s config irq:%d cfg:0x%X\n",
-	       CardType[cs->typ], cs->irq,
+	printk(KERN_INFO "HiSax: AVM A1 config irq:%d cfg:0x%X\n",
+	       cs->irq,
 	       cs->hw.avm.cfg_reg);
 	printk(KERN_INFO
 	       "HiSax: isac:0x%X/0x%X\n",
diff --git a/drivers/isdn/hisax/bkm_a4t.c b/drivers/isdn/hisax/bkm_a4t.c
index 3d1bdc8..9ca2ee5 100644
--- a/drivers/isdn/hisax/bkm_a4t.c
+++ b/drivers/isdn/hisax/bkm_a4t.c
@@ -20,8 +20,6 @@
 #include <linux/pci.h>
 #include "bkm_ax.h"
 
-extern const char *CardType[];
-
 static const char *bkm_a4t_revision = "$Revision: 1.22.2.4 $";
 
 
@@ -284,15 +282,16 @@ static int __devinit a4t_cs_init(struct IsdnCard *card,
 	I20_REGISTER_FILE *pI20_Regs;
 
 	if (!cs->irq) {		/* IRQ range check ?? */
-		printk(KERN_WARNING "HiSax: %s: No IRQ\n", CardType[card->typ]);
+		printk(KERN_WARNING "HiSax: Telekom A4T: No IRQ\n");
 		return (0);
 	}
 	cs->hw.ax.base = (long) ioremap(pci_memaddr, 4096);
 	/* Check suspecious address */
 	pI20_Regs = (I20_REGISTER_FILE *) (cs->hw.ax.base);
 	if ((pI20_Regs->i20IntStatus & 0x8EFFFFFF) != 0) {
-		printk(KERN_WARNING "HiSax: %s address %lx-%lx suspecious\n",
-		       CardType[card->typ], cs->hw.ax.base, cs->hw.ax.base + 4096);
+		printk(KERN_WARNING "HiSax: Telekom A4T address "
+		       "%lx-%lx suspicious\n",
+		       cs->hw.ax.base, cs->hw.ax.base + 4096);
 		iounmap((void *) cs->hw.ax.base);
 		cs->hw.ax.base = 0;
 		return (0);
@@ -302,8 +301,9 @@ static int __devinit a4t_cs_init(struct IsdnCard *card,
 	cs->hw.ax.isac_ale = GCS_1;
 	cs->hw.ax.jade_ale = GCS_3;
 
-	printk(KERN_INFO "HiSax: %s: Card configured at 0x%lX IRQ %d\n",
-	       CardType[card->typ], cs->hw.ax.base, cs->irq);
+	printk(KERN_INFO "HiSax: Telekom A4T: Card configured at "
+	       "0x%lX IRQ %d\n",
+	       cs->hw.ax.base, cs->irq);
 
 	setup_isac(cs);
 	cs->readisac = &ReadISAC;
@@ -349,11 +349,12 @@ setup_bkm_a4t(struct IsdnCard *card)
 			break;
 	}
 	if (!found) {
-		printk(KERN_WARNING "HiSax: %s: Card not found\n", CardType[card->typ]);
+		printk(KERN_WARNING "HiSax: Telekom A4T: Card not found\n");
 		return (0);
 	}
 	if (!pci_memaddr) {
-		printk(KERN_WARNING "HiSax: %s: No Memory base address\n", CardType[card->typ]);
+		printk(KERN_WARNING "HiSax: Telekom A4T: "
+		       "No Memory base address\n");
 		return (0);
 	}
 
diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index 99ef3b4..e1ff471 100644
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -22,8 +22,6 @@
 
 #define	ATTEMPT_PCI_REMAPPING	/* Required for PLX rev 1 */
 
-extern const char *CardType[];
-
 static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";
 
 static const char *sct_quadro_subtypes[] =
@@ -181,8 +179,7 @@ bkm_interrupt_ipac(int intno, void *dev_id)
 		goto Start_IPAC;
 	}
 	if (!icnt)
-		printk(KERN_WARNING "HiSax: %s (%s) IRQ LOOP\n",
-		       CardType[cs->typ],
+		printk(KERN_WARNING "HiSax: Scitel Quadro (%s) IRQ LOOP\n",
 		       sct_quadro_subtypes[cs->subtyp]);
 	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
 	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
@@ -296,8 +293,8 @@ setup_sct_quadro(struct IsdnCard *card)
 	if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
 		cs->subtyp = card->para[0];
 	else {
-		printk(KERN_WARNING "HiSax: %s: Invalid subcontroller in configuration, default to 1\n",
-			CardType[card->typ]);
+		printk(KERN_WARNING "HiSax: Scitel Quadro: Invalid "
+		       "subcontroller in configuration, default to 1\n");
 		return (0);
 	}
 	if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
@@ -322,16 +319,16 @@ setup_sct_quadro(struct IsdnCard *card)
 			}
 		}
 		if (!found) {
-			printk(KERN_WARNING "HiSax: %s (%s): Card not found\n",
-				CardType[card->typ],
+			printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+				"Card not found\n",
 				sct_quadro_subtypes[cs->subtyp]);
 			return (0);
 		}
 #ifdef ATTEMPT_PCI_REMAPPING
 /* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
 		if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
-			printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
-				CardType[card->typ],
+			printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+				"PLX rev 1, remapping required!\n",
 				sct_quadro_subtypes[cs->subtyp]);
 			/* Restart PCI negotiation */
 			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
@@ -344,8 +341,7 @@ setup_sct_quadro(struct IsdnCard *card)
 #endif /* End HACK */
 	}
 	if (!pci_irq) {		/* IRQ range check ?? */
-		printk(KERN_WARNING "HiSax: %s (%s): No IRQ\n",
-		       CardType[card->typ],
+		printk(KERN_WARNING "HiSax: Scitel Quadro (%s): No IRQ\n",
 		       sct_quadro_subtypes[cs->subtyp]);
 		return (0);
 	}
@@ -355,8 +351,8 @@ setup_sct_quadro(struct IsdnCard *card)
 	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
 	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
 	if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
-		printk(KERN_WARNING "HiSax: %s (%s): No IO base address(es)\n",
-		       CardType[card->typ],
+		printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
+		       "No IO base address(es)\n",
 		       sct_quadro_subtypes[cs->subtyp]);
 		return (0);
 	}
@@ -411,8 +407,8 @@ setup_sct_quadro(struct IsdnCard *card)
 	/* For isac and hscx data path */
 	cs->hw.ax.data_adr = cs->hw.ax.base + 4;
 
-	printk(KERN_INFO "HiSax: %s (%s) configured at 0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
-	       CardType[card->typ],
+	printk(KERN_INFO "HiSax: Scitel Quadro (%s) configured at "
+	       "0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
 	       sct_quadro_subtypes[cs->subtyp],
 	       cs->hw.ax.plx_adr,
 	       cs->hw.ax.base,
@@ -432,8 +428,7 @@ setup_sct_quadro(struct IsdnCard *card)
 	cs->cardmsg = &BKM_card_msg;
 	cs->irq_func = &bkm_interrupt_ipac;
 
-	printk(KERN_INFO "HiSax: %s (%s): IPAC Version %d\n",
-		CardType[card->typ],
+	printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
 		sct_quadro_subtypes[cs->subtyp],
 		readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
 	return (1);
diff --git a/drivers/isdn/hisax/gazel.c b/drivers/isdn/hisax/gazel.c
index f66620a..0ea3b46 100644
--- a/drivers/isdn/hisax/gazel.c
+++ b/drivers/isdn/hisax/gazel.c
@@ -19,7 +19,6 @@
 #include "ipac.h"
 #include <linux/pci.h>
 
-extern const char *CardType[];
 static const char *gazel_revision = "$Revision: 2.19.2.4 $";
 
 #define R647      1
@@ -479,8 +478,8 @@ reserve_regions(struct IsdnCard *card, struct IsdnCardState *cs)
 	return 0;
 
       error:
-	printk(KERN_WARNING "Gazel: %s io ports 0x%x-0x%x already in use\n",
-	       CardType[cs->typ], adr, adr + len);
+	printk(KERN_WARNING "Gazel: io ports 0x%x-0x%x already in use\n",
+	       adr, adr + len);
 	return 1;
 }
 
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index fba8b62..f126566 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -22,8 +22,6 @@
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 
-extern const char *CardType[];
-
 static const char *hfcpci_revision = "$Revision: 1.48.2.4 $";
 
 /* table entry in the PCI devices list */
diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c
index 05482d2..f4a2138 100644
--- a/drivers/isdn/hisax/hfc_sx.c
+++ b/drivers/isdn/hisax/hfc_sx.c
@@ -18,8 +18,6 @@
 #include <linux/interrupt.h>
 #include <linux/isapnp.h>
 
-extern const char *CardType[];
-
 static const char *hfcsx_revision = "$Revision: 1.12.2.5 $";
 
 /***************************************/
diff --git a/drivers/isdn/hisax/isurf.c b/drivers/isdn/hisax/isurf.c
index 55de069..ca41617 100644
--- a/drivers/isdn/hisax/isurf.c
+++ b/drivers/isdn/hisax/isurf.c
@@ -17,8 +17,6 @@
 #include "isdnl1.h"
 #include <linux/isapnp.h>
 
-extern const char *CardType[];
-
 static const char *ISurf_revision = "$Revision: 1.12.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -251,22 +249,19 @@ setup_isurf(struct IsdnCard *card)
 			return(0);
 		}
 #else
-		printk(KERN_WARNING "HiSax: %s port/mem not set\n",
-			CardType[card->typ]);
+		printk(KERN_WARNING "HiSax: Siemens I-Surf port/mem not set\n");
 		return (0);
 #endif
 	}
 	if (!request_region(cs->hw.isurf.reset, 1, "isurf isdn")) {
 		printk(KERN_WARNING
-			"HiSax: %s config port %x already in use\n",
-			CardType[card->typ],
+			"HiSax: Siemens I-Surf config port %x already in use\n",
 			cs->hw.isurf.reset);
 			return (0);
 	}
 	if (!request_region(cs->hw.isurf.phymem, ISURF_IOMEM_SIZE, "isurf iomem")) {
-		printk(KERN_WARNING
-			"HiSax: %s memory region %lx-%lx already in use\n",
-			CardType[card->typ],
+		printk(KERN_WARNING "HiSax: Siemens I-Surf memory region "
+			"%lx-%lx already in use\n",
 			cs->hw.isurf.phymem,
 			cs->hw.isurf.phymem + ISURF_IOMEM_SIZE);
 		release_region(cs->hw.isurf.reset, 1);
diff --git a/drivers/isdn/hisax/ix1_micro.c b/drivers/isdn/hisax/ix1_micro.c
index 252d79d..2d18d4f 100644
--- a/drivers/isdn/hisax/ix1_micro.c
+++ b/drivers/isdn/hisax/ix1_micro.c
@@ -24,7 +24,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
 static const char *ix1_revision = "$Revision: 2.12.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -288,15 +287,15 @@ setup_ix1micro(struct IsdnCard *card)
 	if (cs->hw.ix1.cfg_reg) {
 		if (!request_region(cs->hw.ix1.cfg_reg, 4, "ix1micro cfg")) {
 			printk(KERN_WARNING
-			  "HiSax: %s config port %x-%x already in use\n",
-			       CardType[card->typ],
+			  "HiSax: ITK ix1-micro Rev.2 config port "
+			  "%x-%x already in use\n",
 			       cs->hw.ix1.cfg_reg,
 			       cs->hw.ix1.cfg_reg + 4);
 			return (0);
 		}
 	}
-	printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
-		CardType[cs->typ], cs->irq, cs->hw.ix1.cfg_reg);
+	printk(KERN_INFO "HiSax: ITK ix1-micro Rev.2 config irq:%d io:0x%X\n",
+		cs->irq, cs->hw.ix1.cfg_reg);
 	setup_isac(cs);
 	cs->readisac = &ReadISAC;
 	cs->writeisac = &WriteISAC;
diff --git a/drivers/isdn/hisax/mic.c b/drivers/isdn/hisax/mic.c
index a81d175..2539430 100644
--- a/drivers/isdn/hisax/mic.c
+++ b/drivers/isdn/hisax/mic.c
@@ -16,8 +16,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
-
 static const char *mic_revision = "$Revision: 1.12.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -210,8 +208,7 @@ setup_mic(struct IsdnCard *card)
 
 	if (!request_region(cs->hw.mic.cfg_reg, bytecnt, "mic isdn")) {
 		printk(KERN_WARNING
-		       "HiSax: %s config port %x-%x already in use\n",
-		       CardType[card->typ],
+		       "HiSax: ith mic config port %x-%x already in use\n",
 		       cs->hw.mic.cfg_reg,
 		       cs->hw.mic.cfg_reg + bytecnt);
 		return (0);
diff --git a/drivers/isdn/hisax/netjet.h b/drivers/isdn/hisax/netjet.h
index 4d89d3e..68e504d 100644
--- a/drivers/isdn/hisax/netjet.h
+++ b/drivers/isdn/hisax/netjet.h
@@ -12,8 +12,6 @@
  *
  */
 
-extern const char *CardType[];
-
 #define byteout(addr,val) outb(val,addr)
 #define bytein(addr) inb(addr)
 
diff --git a/drivers/isdn/hisax/niccy.c b/drivers/isdn/hisax/niccy.c
index bd99211..421b8e6 100644
--- a/drivers/isdn/hisax/niccy.c
+++ b/drivers/isdn/hisax/niccy.c
@@ -21,7 +21,6 @@
 #include <linux/pci.h>
 #include <linux/isapnp.h>
 
-extern const char *CardType[];
 static const char *niccy_revision = "$Revision: 1.21.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -284,14 +283,14 @@ int __devinit setup_niccy(struct IsdnCard *card)
 		cs->subtyp = NICCY_PNP;
 		cs->irq = card->para[0];
 		if (!request_region(cs->hw.niccy.isac, 2, "niccy data")) {
-			printk(KERN_WARNING "HiSax: %s data port %x-%x "
-				"already in use\n", CardType[card->typ],
+			printk(KERN_WARNING "HiSax: NICCY data port %x-%x "
+				"already in use\n",
 				cs->hw.niccy.isac, cs->hw.niccy.isac + 1);
 			return 0;
 		}
 		if (!request_region(cs->hw.niccy.isac_ale, 2, "niccy addr")) {
-			printk(KERN_WARNING "HiSax: %s address port %x-%x "
-				"already in use\n", CardType[card->typ],
+			printk(KERN_WARNING "HiSax: NICCY address port %x-%x "
+				"already in use\n",
 				cs->hw.niccy.isac_ale,
 				cs->hw.niccy.isac_ale + 1);
 			release_region(cs->hw.niccy.isac, 2);
@@ -339,15 +338,13 @@ int __devinit setup_niccy(struct IsdnCard *card)
 		cs->hw.niccy.hscx_ale = pci_ioaddr + HSCX_PCI_ADDR;
 		if (!request_region(cs->hw.niccy.isac, 4, "niccy")) {
 			printk(KERN_WARNING
-			       "HiSax: %s data port %x-%x already in use\n",
-			       CardType[card->typ],
+			       "HiSax: NICCY data port %x-%x already in use\n",
 			       cs->hw.niccy.isac, cs->hw.niccy.isac + 4);
 			return 0;
 		}
 		if (!request_region(cs->hw.niccy.cfg_reg, 0x40, "niccy pci")) {
 			printk(KERN_WARNING
-			       "HiSax: %s pci port %x-%x already in use\n",
-			       CardType[card->typ],
+			       "HiSax: NICCY pci port %x-%x already in use\n",
 			       cs->hw.niccy.cfg_reg,
 			       cs->hw.niccy.cfg_reg + 0x40);
 			release_region(cs->hw.niccy.isac, 4);
@@ -359,8 +356,8 @@ int __devinit setup_niccy(struct IsdnCard *card)
 		return 0;
 #endif				/* CONFIG_PCI_LEGACY */
 	}
-	printk(KERN_INFO "HiSax: %s %s config irq:%d data:0x%X ale:0x%X\n",
-		CardType[cs->typ], (cs->subtyp == 1) ? "PnP" : "PCI",
+	printk(KERN_INFO "HiSax: NICCY %s config irq:%d data:0x%X ale:0x%X\n",
+		(cs->subtyp == 1) ? "PnP" : "PCI",
 		cs->irq, cs->hw.niccy.isac, cs->hw.niccy.isac_ale);
 	setup_isac(cs);
 	cs->readisac = &ReadISAC;
diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index a895dfe..8d36ccc 100644
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -235,8 +235,7 @@ static int __devinit njs_cs_init_rest(struct IsdnCard *card,
 		cs->subtyp ? "TJ320" : "TJ300", cs->hw.njet.base, cs->irq);
 	if (!request_region(cs->hw.njet.base, bytecnt, "netjet-s isdn")) {
 		printk(KERN_WARNING
-		       "HiSax: %s config port %#lx-%#lx already in use\n",
-		       CardType[card->typ],
+		       "HiSax: NETjet-S config port %#lx-%#lx already in use\n",
 		       cs->hw.njet.base,
 		       cs->hw.njet.base + bytecnt);
 		return (0);
diff --git a/drivers/isdn/hisax/nj_u.c b/drivers/isdn/hisax/nj_u.c
index f017d38..d306c94 100644
--- a/drivers/isdn/hisax/nj_u.c
+++ b/drivers/isdn/hisax/nj_u.c
@@ -197,8 +197,8 @@ static int __devinit nju_cs_init_rest(struct IsdnCard *card,
 		cs->hw.njet.base, cs->irq);
 	if (!request_region(cs->hw.njet.base, bytecnt, "netspider-u isdn")) {
 		printk(KERN_WARNING
-		       "HiSax: %s config port %#lx-%#lx already in use\n",
-		       CardType[card->typ],
+		       "HiSax: NETspider-U config port %#lx-%#lx "
+		       "already in use\n",
 		       cs->hw.njet.base,
 		       cs->hw.njet.base + bytecnt);
 		return (0);
diff --git a/drivers/isdn/hisax/s0box.c b/drivers/isdn/hisax/s0box.c
index 150ef68..16d00b5 100644
--- a/drivers/isdn/hisax/s0box.c
+++ b/drivers/isdn/hisax/s0box.c
@@ -16,7 +16,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
 static const char *s0box_revision = "$Revision: 2.6.2.4 $";
 
 static inline void
@@ -231,19 +230,15 @@ setup_s0box(struct IsdnCard *card)
 	cs->hw.teles3.hscxfifo[1] = cs->hw.teles3.hscx[1] + 0x3e;
 	cs->irq = card->para[0];
 	if (!request_region(cs->hw.teles3.cfg_reg,8, "S0Box parallel I/O")) {
-		printk(KERN_WARNING
-		       "HiSax: %s ports %x-%x already in use\n",
-		       CardType[cs->typ],
+		printk(KERN_WARNING "HiSax: S0Box ports %x-%x already in use\n",
                        cs->hw.teles3.cfg_reg,
                        cs->hw.teles3.cfg_reg + 7);
 		return 0;
 	}
-	printk(KERN_INFO
-		"HiSax: %s config irq:%d isac:0x%x  cfg:0x%x\n",
-		CardType[cs->typ], cs->irq,
+	printk(KERN_INFO "HiSax: S0Box config irq:%d isac:0x%x  cfg:0x%x\n",
+		cs->irq,
 		cs->hw.teles3.isac, cs->hw.teles3.cfg_reg);
-	printk(KERN_INFO
-		"HiSax: hscx A:0x%x  hscx B:0x%x\n",
+	printk(KERN_INFO "HiSax: hscx A:0x%x  hscx B:0x%x\n",
 		cs->hw.teles3.hscx[0], cs->hw.teles3.hscx[1]);
 	setup_isac(cs);
 	cs->readisac = &ReadISAC;
diff --git a/drivers/isdn/hisax/saphir.c b/drivers/isdn/hisax/saphir.c
index c99b166..b34a81d 100644
--- a/drivers/isdn/hisax/saphir.c
+++ b/drivers/isdn/hisax/saphir.c
@@ -18,7 +18,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
 static char *saphir_rev = "$Revision: 1.10.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -260,15 +259,14 @@ setup_saphir(struct IsdnCard *card)
 	cs->irq = card->para[0];
 	if (!request_region(cs->hw.saphir.cfg_reg, 6, "saphir")) {
 		printk(KERN_WARNING
-			"HiSax: %s config port %x-%x already in use\n",
-			CardType[card->typ],
+			"HiSax: HST Saphir config port %x-%x already in use\n",
 			cs->hw.saphir.cfg_reg,
 			cs->hw.saphir.cfg_reg + 5);
 		return (0);
 	}
 
-	printk(KERN_INFO "HiSax: %s config irq:%d io:0x%X\n",
-		CardType[cs->typ], cs->irq, cs->hw.saphir.cfg_reg);
+	printk(KERN_INFO "HiSax: HST Saphir config irq:%d io:0x%X\n",
+	       cs->irq, cs->hw.saphir.cfg_reg);
 
 	setup_isac(cs);
 	cs->hw.saphir.timer.function = (void *) SaphirWatchDog;
diff --git a/drivers/isdn/hisax/sportster.c b/drivers/isdn/hisax/sportster.c
index 0220950..0a53759 100644
--- a/drivers/isdn/hisax/sportster.c
+++ b/drivers/isdn/hisax/sportster.c
@@ -18,7 +18,6 @@
 #include "hscx.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
 static const char *sportster_revision = "$Revision: 1.16.2.4 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -192,9 +191,9 @@ get_io_range(struct IsdnCardState *cs)
 	for (i=0;i<64;i++) {
 		adr = cs->hw.spt.cfg_reg + i *1024;
 		if (!request_region(adr, 8, "sportster")) {
-			printk(KERN_WARNING
-				"HiSax: %s config port %x-%x already in use\n",
-				CardType[cs->typ], adr, adr + 8);
+			printk(KERN_WARNING "HiSax: USR Sportster config port "
+				"%x-%x already in use\n",
+				adr, adr + 8);
 			break;
 		} 
 	}
@@ -247,8 +246,8 @@ setup_sportster(struct IsdnCard *card)
 			printk(KERN_WARNING "Sportster: wrong IRQ\n");
 			return(0);
 	}
-	printk(KERN_INFO "HiSax: %s config irq:%d cfg:0x%X\n",
-		CardType[cs->typ], cs->irq, cs->hw.spt.cfg_reg);
+	printk(KERN_INFO "HiSax: USR Sportster config irq:%d cfg:0x%X\n",
+		cs->irq, cs->hw.spt.cfg_reg);
 	setup_isac(cs);
 	cs->readisac = &ReadISAC;
 	cs->writeisac = &WriteISAC;
diff --git a/drivers/isdn/hisax/teleint.c b/drivers/isdn/hisax/teleint.c
index 0909662..b0ce4ae 100644
--- a/drivers/isdn/hisax/teleint.c
+++ b/drivers/isdn/hisax/teleint.c
@@ -16,8 +16,6 @@
 #include "hfc_2bs0.h"
 #include "isdnl1.h"
 
-extern const char *CardType[];
-
 static const char *TeleInt_revision = "$Revision: 1.16.2.5 $";
 
 #define byteout(addr,val) outb(val,addr)
@@ -286,8 +284,7 @@ setup_TeleInt(struct IsdnCard *card)
 	init_timer(&cs->hw.hfc.timer);
 	if (!request_region(cs->hw.hfc.addr, 2, "TeleInt isdn")) {
 		printk(KERN_WARNING
-		       "HiSax: %s config port %x-%x already in use\n",
-		       CardType[card->typ],
+		       "HiSax: TeleInt config port %x-%x already in use\n",
 		       cs->hw.hfc.addr,
 		       cs->hw.hfc.addr + 2);
 		return (0);
diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c
index 4393003..28b08de 100644
--- a/drivers/isdn/hisax/telespci.c
+++ b/drivers/isdn/hisax/telespci.c
@@ -19,7 +19,6 @@
 #include "isdnl1.h"
 #include <linux/pci.h>
 
-extern const char *CardType[];
 static const char *telespci_revision = "$Revision: 2.23.2.3 $";
 
 #define ZORAN_PO_RQ_PEN	0x02000000
@@ -329,8 +328,8 @@ setup_telespci(struct IsdnCard *card)
 	/* writel(0x00800000, cs->hw.teles0.membase + 0x200); */
 
 	printk(KERN_INFO
-	       "HiSax: %s config irq:%d mem:%p\n",
-	       CardType[cs->typ], cs->irq,
+	       "HiSax: Teles PCI config irq:%d mem:%p\n",
+	       cs->irq,
 	       cs->hw.teles0.membase);
 
 	setup_isac(cs);
diff --git a/drivers/isdn/hisax/w6692.c b/drivers/isdn/hisax/w6692.c
index 39129b9..bb1c8dd 100644
--- a/drivers/isdn/hisax/w6692.c
+++ b/drivers/isdn/hisax/w6692.c
@@ -38,8 +38,6 @@ static const PCI_ENTRY id_list[] =
 #define W6692_DYNALINK 1
 #define W6692_USR      2
 
-extern const char *CardType[];
-
 static const char *w6692_revision = "$Revision: 1.18.2.4 $";
 
 #define DBUSY_TIMER_VALUE 80
-- 
1.5.3.8


  parent reply	other threads:[~2008-02-14 23:41 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-07-18  3:04 [PATCH 00/14] [ISDN] HiSax hotplug conversion Jeff Garzik
2007-07-18  3:04 ` [PATCH 01/14] [ISDN] HiSax: modularize card setup Jeff Garzik
2008-02-15 13:38   ` Sam Ravnborg
2007-07-18  3:46 ` [PATCH 04/14] [ISDN] HiSax bkm_a4t: convert to PCI hotplug API Jeff Garzik
2008-02-15 13:33   ` Sam Ravnborg
2007-07-18  3:49 ` [PATCH 05/14] [ISDN] HiSax enternow: " Jeff Garzik
2008-02-15 13:21   ` Jan Engelhardt
2007-07-18  3:54 ` [PATCH 06/14] [ISDN] HiSax hfc_pci, w6692: " Jeff Garzik
2007-07-18  3:59 ` [PATCH 07/14] [ISDN] HiSax nj_s, nj_u: " Jeff Garzik
2007-07-18  4:02 ` [PATCH 08/14] [ISDN] HiSax telespci: " Jeff Garzik
2007-07-24 12:26 ` [PATCH 11/14] [ISDN] HiSax niccy: convert to modern ISA/PNP/PCI probing Jeff Garzik
2007-08-02 12:37 ` [PATCH 13/14] [ISDN] HiSax bkm_a8: convert to PCI hotplug API Jeff Garzik
2007-10-31  5:10 ` [PATCH 03/14] [ISDN] Ready HiSax driver for modularization Jeff Garzik
2008-02-15 13:45   ` Sam Ravnborg
2007-10-31  5:11 ` [PATCH 09/14] [ISDN] HiSax avm_pci: convert to modern PCI/ISA/PNP probing Jeff Garzik
2007-10-31  5:12 ` [PATCH 10/14] [ISDN] HiSax gazel: convert to modern ISA/PCI probing Jeff Garzik
2007-10-31  5:13 ` [PATCH 12/14] [ISDN] HiSax diva: convert to modern ISA/PNP/PCI probing Jeff Garzik
2007-10-31  7:42 ` Jeff Garzik [this message]
2008-02-15 13:37   ` [PATCH 02/14] [ISDN] Hisax: eliminate many unnecessary references to CardType[] Sam Ravnborg
2007-11-06 14:41 ` [PATCH 14/14] [isdn-pci] add missing file Jeff Garzik
2008-02-14 23:52 ` [PATCH 00/14] [ISDN] HiSax hotplug conversion Greg KH
2008-02-14 23:50   ` Jeff Garzik
2008-02-14 23:53 ` Jeff Garzik
2008-02-15 13:27 ` Sam Ravnborg
2008-02-15 15:13   ` Jeff Garzik
2008-02-15 19:11     ` Sam Ravnborg
2008-02-16  1:09 ` Andrew Morton
2008-02-16  4:41 [PATCH 01/14] [ISDN] HiSax: modularization prep Jeff Garzik
2007-10-31  7:42 ` [PATCH 02/14] [ISDN] Hisax: eliminate many unnecessary references to CardType[] Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e6fd205c4444928e0f7176c01e914f4d625a50e9.1203031878.git.jeff@garzik.org \
    --to=jeff@garzik.org \
    --cc=isdn4linux@listserv.isdn4linux.de \
    --cc=kkeil@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: [PATCH 02/14] [ISDN] Hisax: eliminate many unnecessary references to CardType[]' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).