LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* I2O block driver broken in kernel 2.6.19?
@ 2007-02-18 23:28 Chuck Ebbert
  2007-02-19 21:22 ` Sam Hokin
                   ` (2 more replies)
  0 siblings, 3 replies; 7+ messages in thread
From: Chuck Ebbert @ 2007-02-18 23:28 UTC (permalink / raw)
  To: linux-kernel; +Cc: Jens Axboe, Jeff Garzik

Fedora is getting a bunch of bug reports about the I2O block
driver not working in 2.6.19 kernels.

Everything looks like it loads OK, but no block IO can be
done, not even reading the partition table:

I2O subsystem v1.325
i2o: max drivers = 8
i2o: Checking for PCI I2O controllers...
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
iop0: controller found (0000:01:07.0)
iop0: limit sectors per request to 128
iop0: using 64-bit DMA
iop0: PCI I2O controller at E0000000 size=1048576
iop0: Installed at IRQ 19
i2o: iop0: Activating I2O controller...
i2o: iop0: This may take a few minutes if there are many devices
iop0: HRT has 1 entries of 16 bytes each.
Adapter 00000012: TID 0000:[HPC*]:PCI 1: Bus 1 Device 22 Function 0
i2o: iop0: Controller added
I2O Block Device OSM v1.325
block-osm: registered device at major 80
 i2o/hda:<3>Buffer I/O error on device i2o/hda, logical block 0
Buffer I/O error on device i2o/hda, logical block 0
Buffer I/O error on device i2o/hda, logical block 0
 unable to read partition table
block-osm: device added (TID: 209): i2o/hda

The driver looks unchanged except for cleanups...



^ permalink raw reply	[flat|nested] 7+ messages in thread
* Re: I2O block driver broken in kernel 2.6.19?
@ 2007-03-11 19:21 kaspro
  0 siblings, 0 replies; 7+ messages in thread
From: kaspro @ 2007-03-11 19:21 UTC (permalink / raw)
  To: linux-kernel

...same here. Until 2.6.18 working fine...
Thanks

>> On Fri, 23 Feb 2007 22:57:27 +0000 (UTC) Mark Gray <mvg001@xxxxxxxxxxxxx> wrote:
>> > i2o/hda:<3>Buffer I/O error on device i2o/hda, logical block 0
>> > Buffer I/O error on device i2o/hda, logical block 0
>>
>> Same error here. Both 2.6.19 and 2.6.20 kernels, using Adaptec 2400A RAID.

>Is Adaptec 2400 controlled by drivers/message/i2o? I assume so...

>If so, thats's at least three people reporting breakage in 2.6.19 and later.

>Is anyone able perform a git-bisect to identify the offending commit? It
>would really help.

>Thanks.
_____________________________________________________________________
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071&distributionid=000000000066


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2007-03-11 19:30 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-02-18 23:28 I2O block driver broken in kernel 2.6.19? Chuck Ebbert
2007-02-19 21:22 ` Sam Hokin
2007-02-23 22:57 ` Mark Gray
2007-02-24 11:09   ` Andrew Morton
2007-02-25 18:12     ` Markus Lidel
2007-03-06 16:09 ` Enrico Scholz
2007-03-11 19:21 kaspro

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).