Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Andrew Lunn <andrew@lunn.ch>
To: Kurt Kanzenbach <kurt@linutronix.de>
Cc: Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	netdev@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	Richard Cochran <richardcochran@gmail.com>,
	Kamil Alkhouri <kamil.alkhouri@hs-offenburg.de>,
	ilias.apalodimas@linaro.org
Subject: Re: [RFC PATCH 2/9] net: dsa: Add DSA driver for Hirschmann Hellcreek switches
Date: Thu, 18 Jun 2020 17:22:47 +0200	[thread overview]
Message-ID: <20200618152247.GF240559@lunn.ch> (raw)
In-Reply-To: <20200618064029.32168-3-kurt@linutronix.de>

> +static void __hellcreek_select_port(struct hellcreek *hellcreek, int port)

Hi Kurt

In general, please can you drop all these __ prefixes. They are useful
when you have for example hellcreek_select_port() takes a lock and
then calls _hellcreek_select_port(), but here, there is no need for
them.

> +static int hellcreek_detect(struct hellcreek *hellcreek)
> +{
> +	u8 tgd_maj, tgd_min;
> +	u16 id, rel_low, rel_high, date_low, date_high, tgd_ver;
> +	u32 rel, date;

Reverse Christmas tree please. Here and everywhere else.

> +
> +	id	  = hellcreek_read(hellcreek, HR_MODID_C);
> +	rel_low	  = hellcreek_read(hellcreek, HR_REL_L_C);
> +	rel_high  = hellcreek_read(hellcreek, HR_REL_H_C);
> +	date_low  = hellcreek_read(hellcreek, HR_BLD_L_C);
> +	date_high = hellcreek_read(hellcreek, HR_BLD_H_C);
> +	tgd_ver   = hellcreek_read(hellcreek, TR_TGDVER);
> +
> +	if (id != HELLCREEK_MODULE_ID)
> +		return -ENODEV;
> +
> +	rel	= rel_low | (rel_high << 16);
> +	date	= date_low | (date_high << 16);
> +	tgd_maj = (tgd_ver & TR_TGDVER_REV_MAJ_MASK) >> TR_TGDVER_REV_MAJ_SHIFT;
> +	tgd_min = (tgd_ver & TR_TGDVER_REV_MIN_MASK) >> TR_TGDVER_REV_MIN_SHIFT;
> +
> +	dev_info(hellcreek->dev, "Module ID=%02x Release=%04x Date=%04x TGD Version=%02x.%02x\n",
> +		 id, rel, date, tgd_maj, tgd_min);
> +
> +	return 0;
> +}

> +static int hellcreek_port_enable(struct dsa_switch *ds, int port,
> +				 struct phy_device *phy)
> +{
> +	struct hellcreek *hellcreek = ds->priv;
> +	struct hellcreek_port *hellcreek_port = &hellcreek->ports[port];
> +	unsigned long flags;
> +	u16 val;
> +
> +	if (port >= NUM_PORTS)
> +		return -EINVAL;
> +
> +	dev_info(hellcreek->dev, "Enable port %d\n", port);

dev_dbg().

+
> +	spin_lock_irqsave(&hellcreek->reg_lock, flags);

I've not seen any interrupt handling code in the driver, and there is
no mention of an interrupt in the DT binding. Do you really need
_irqsave spin locks?

> +
> +	__hellcreek_select_port(hellcreek, port);
> +	val = hellcreek_port->ptcfg;
> +	val |= HR_PTCFG_ADMIN_EN;
> +	hellcreek_write(hellcreek, val, HR_PTCFG);
> +	hellcreek_port->ptcfg = val;
> +
> +	spin_unlock_irqrestore(&hellcreek->reg_lock, flags);
> +
> +	return 0;
> +}
> +
> +static void hellcreek_port_disable(struct dsa_switch *ds, int port)
> +{
> +	struct hellcreek *hellcreek = ds->priv;
> +	struct hellcreek_port *hellcreek_port = &hellcreek->ports[port];
> +	unsigned long flags;
> +	u16 val;
> +
> +	if (port >= NUM_PORTS)
> +		return;

I don't think this test is actually needed, here or in any of the
other callbacks. If it does happen, it means we have a core bug we
should fix.

> +
> +	dev_info(hellcreek->dev, "Disable port %d\n", port);

dev_dbg()

> +	spin_lock_irqsave(&hellcreek->reg_lock, flags);
> +
> +	__hellcreek_select_port(hellcreek, port);
> +	val = hellcreek_port->ptcfg;
> +	val &= ~HR_PTCFG_ADMIN_EN;
> +	hellcreek_write(hellcreek, val, HR_PTCFG);
> +	hellcreek_port->ptcfg = val;
> +
> +	spin_unlock_irqrestore(&hellcreek->reg_lock, flags);
> +}
> +

> +static void hellcreek_get_ethtool_stats(struct dsa_switch *ds, int port,
> +					uint64_t *data)
> +{
> +	struct hellcreek *hellcreek = ds->priv;
> +	struct hellcreek_port *hellcreek_port = &hellcreek->ports[port];
> +	unsigned long flags;
> +	int i;
> +
> +	if (port >= NUM_PORTS)
> +		return;
> +
> +	spin_lock_irqsave(&hellcreek->reg_lock, flags);
> +	for (i = 0; i < ARRAY_SIZE(hellcreek_counter); ++i) {
> +		const struct hellcreek_counter *counter = &hellcreek_counter[i];
> +		u8 offset = counter->offset + port * 64;
> +		u16 high, low;
> +		u64 value = 0;
> +
> +		__hellcreek_select_counter(hellcreek, offset);
> +
> +		high  = hellcreek_read(hellcreek, HR_CRDH);
> +		low   = hellcreek_read(hellcreek, HR_CRDL);
> +		value = (high << 16) | low;

Is there some sort of snapshot happening here? Or do you need to read
high again, to make sure it has not incremented when low was being
read?

> +
> +		hellcreek_port->counter_values[i] += value;
> +		data[i] = hellcreek_port->counter_values[i];
> +	}
> +	spin_unlock_irqrestore(&hellcreek->reg_lock, flags);
> +}
> +
> +static int hellcreek_vlan_prepare(struct dsa_switch *ds, int port,
> +				  const struct switchdev_obj_port_vlan *vlan)
> +{
> +	struct hellcreek *hellcreek = ds->priv;
> +
> +	/* Nothing todo */
> +	dev_info(hellcreek->dev, "VLAN prepare for port %d\n", port);

dev_dbg()

> +
> +	return 0;
> +}
> +

> +static void hellcreek_vlan_add(struct dsa_switch *ds, int port,
> +			       const struct switchdev_obj_port_vlan *vlan)
> +{
> +	struct hellcreek *hellcreek = ds->priv;
> +	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
> +	bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
> +	unsigned long flags;
> +	u16 vid;
> +
> +	if (port >= NUM_PORTS || vlan->vid_end >= 4096)

Again, if vlan->vid_end >= 4096 is true, there is a core bug which
needs fixing.

> +		return;
> +
> +	dev_info(hellcreek->dev, "Add VLANs (%d -- %d) on port %d, %s, %s\n",
> +		 vlan->vid_begin, vlan->vid_end, port,
> +		 untagged ? "untagged" : "tagged",
> +		 pvid ? "PVID" : "no PVID");

Please go thought the driver and consider all you dev_info()
statements. Should they be dev_dbg()?

	    Andrew

  reply	other threads:[~2020-06-18 15:22 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-18  6:40 [RFC PATCH 0/9] Hirschmann Hellcreek DSA driver Kurt Kanzenbach
2020-06-18  6:40 ` [RFC PATCH 1/9] net: dsa: Add tag handling for Hirschmann Hellcreek switches Kurt Kanzenbach
2020-06-18 13:42   ` Andrew Lunn
2020-06-18  6:40 ` [RFC PATCH 2/9] net: dsa: Add DSA driver " Kurt Kanzenbach
2020-06-18 15:22   ` Andrew Lunn [this message]
2020-06-19  8:12     ` Kurt Kanzenbach
2020-06-18  6:40 ` [RFC PATCH 3/9] net: dsa: hellcreek: Add PTP clock support Kurt Kanzenbach
2020-06-18 15:46   ` Jakub Kicinski
2020-06-19  8:13     ` Kurt Kanzenbach
2020-06-18 17:23   ` Andrew Lunn
2020-06-19  8:26     ` Kurt Kanzenbach
2020-06-19 13:40       ` Andrew Lunn
2020-06-22 11:52         ` Kurt Kanzenbach
2020-06-24 13:03   ` Richard Cochran
2020-06-25  7:08     ` Kurt Kanzenbach
2020-06-18  6:40 ` [RFC PATCH 4/9] net: dsa: hellcreek: Add support for hardware timestamping Kurt Kanzenbach
2020-06-18  6:40 ` [RFC PATCH 5/9] net: dsa: hellcreek: Add TAPRIO offloading support Kurt Kanzenbach
2020-06-18  6:40 ` [RFC PATCH 6/9] net: dsa: hellcreek: Add debugging mechanisms Kurt Kanzenbach
2020-06-18 17:34   ` Andrew Lunn
2020-06-19  8:36     ` Kurt Kanzenbach
2020-06-19 13:42       ` Andrew Lunn
2020-06-22 12:32         ` Kurt Kanzenbach
2020-06-22 13:55           ` Andrew Lunn
2020-06-23  6:07             ` Kurt Kanzenbach
2020-06-22 14:14           ` Vladimir Oltean
2020-06-23  6:04             ` Kurt Kanzenbach
2020-06-18  6:40 ` [RFC PATCH 7/9] net: dsa: hellcreek: Add PTP status LEDs Kurt Kanzenbach
2020-06-18 17:46   ` Andrew Lunn
2020-06-19  8:45     ` Kurt Kanzenbach
2020-06-19 13:52       ` Andrew Lunn
2020-06-18  6:40 ` [RFC PATCH 8/9] dt-bindings: Add vendor prefix for Hirschmann Kurt Kanzenbach
2020-06-18  6:40 ` [RFC PATCH 9/9] dt-bindings: net: dsa: Add documentation for Hellcreek switches Kurt Kanzenbach
2020-06-18 13:47   ` Andrew Lunn
2020-06-19  8:47     ` Kurt Kanzenbach
2020-06-19 13:56       ` Andrew Lunn
2020-06-22 12:02         ` Kurt Kanzenbach
2020-06-22 13:49           ` Andrew Lunn
2020-06-23  6:09             ` Kurt Kanzenbach
2020-06-18 17:40   ` Florian Fainelli
2020-06-19  8:48     ` Kurt Kanzenbach
2020-06-22 12:05       ` Kurt Kanzenbach
2020-06-26 17:11         ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200618152247.GF240559@lunn.ch \
    --to=andrew@lunn.ch \
    --cc=bigeasy@linutronix.de \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=kamil.alkhouri@hs-offenburg.de \
    --cc=kuba@kernel.org \
    --cc=kurt@linutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=richardcochran@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=vivien.didelot@gmail.com \
    --subject='Re: [RFC PATCH 2/9] net: dsa: Add DSA driver for Hirschmann Hellcreek switches' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox