Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Joseph Hwang <josephsih@chromium.org>
To: linux-bluetooth@vger.kernel.org, marcel@holtmann.org,
	luiz.dentz@gmail.com
Cc: josephsih@google.com,
	chromeos-bluetooth-upstreaming@chromium.org,
	Joseph Hwang <josephsih@chromium.org>,
	Alain Michaud <alainm@chromium.org>,
	Abhishek Pandit-Subedi <abhishekpandit@chromium.org>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH v1 1/2] Bluetooth: btusb: define HCI packet sizes of USB Alts
Date: Thu, 13 Aug 2020 16:41:28 +0800	[thread overview]
Message-ID: <20200813164059.v1.1.I56de28ec171134cb9f97062e2c304a72822ca38b@changeid> (raw)
In-Reply-To: <20200813084129.332730-1-josephsih@chromium.org>

It is desirable to define the HCI packet payload sizes of
USB alternate settings so that they can be exposed to user
space.

Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Joseph Hwang <josephsih@chromium.org>
---

 drivers/bluetooth/btusb.c        | 43 ++++++++++++++++++++++++--------
 include/net/bluetooth/hci_core.h |  1 +
 2 files changed, 33 insertions(+), 11 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 8d2608ddfd0875..df7cadf6385868 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -459,6 +459,22 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
 #define BTUSB_WAKEUP_DISABLE	14
 #define BTUSB_USE_ALT1_FOR_WBS	15
 
+/* Per core spec 5, vol 4, part B, table 2.1,
+ * list the hci packet payload sizes for various ALT settings.
+ * This is used to set the packet length for the wideband speech.
+ * If a controller does not probe its usb alt setting, the default
+ * value will be 0. Any clients at upper layers should interpret it
+ * as a default value and set a proper packet length accordingly.
+ *
+ * To calculate the HCI packet payload length:
+ *   for alternate settings 1 - 5:
+ *     hci_packet_size = suggested_max_packet_size * 3 (packets) -
+ *                       3 (HCI header octets)
+ *   for alternate setting 6:
+ *     hci_packet_size = suggested_max_packet_size - 3 (HCI header octets)
+ */
+static const int hci_packet_size_usb_alt[] = { 0, 24, 48, 72, 96, 144, 60 };
+
 struct btusb_data {
 	struct hci_dev       *hdev;
 	struct usb_device    *udev;
@@ -3958,6 +3974,15 @@ static int btusb_probe(struct usb_interface *intf,
 	hdev->notify = btusb_notify;
 	hdev->prevent_wake = btusb_prevent_wake;
 
+	if (id->driver_info & BTUSB_AMP) {
+		/* AMP controllers do not support SCO packets */
+		data->isoc = NULL;
+	} else {
+		/* Interface orders are hardcoded in the specification */
+		data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
+		data->isoc_ifnum = ifnum_base + 1;
+	}
+
 #ifdef CONFIG_PM
 	err = btusb_config_oob_wake(hdev);
 	if (err)
@@ -4021,6 +4046,10 @@ static int btusb_probe(struct usb_interface *intf,
 		hdev->set_diag = btintel_set_diag;
 		hdev->set_bdaddr = btintel_set_bdaddr;
 		hdev->cmd_timeout = btusb_intel_cmd_timeout;
+
+		if (btusb_find_altsetting(data, 6))
+			hdev->sco_pkt_len = hci_packet_size_usb_alt[6];
+
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 		set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
@@ -4062,15 +4091,6 @@ static int btusb_probe(struct usb_interface *intf,
 		btusb_check_needs_reset_resume(intf);
 	}
 
-	if (id->driver_info & BTUSB_AMP) {
-		/* AMP controllers do not support SCO packets */
-		data->isoc = NULL;
-	} else {
-		/* Interface orders are hardcoded in the specification */
-		data->isoc = usb_ifnum_to_if(data->udev, ifnum_base + 1);
-		data->isoc_ifnum = ifnum_base + 1;
-	}
-
 	if (IS_ENABLED(CONFIG_BT_HCIBTUSB_RTL) &&
 	    (id->driver_info & BTUSB_REALTEK)) {
 		hdev->setup = btrtl_setup_realtek;
@@ -4082,9 +4102,10 @@ static int btusb_probe(struct usb_interface *intf,
 		 * (DEVICE_REMOTE_WAKEUP)
 		 */
 		set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
-		if (btusb_find_altsetting(data, 1))
+		if (btusb_find_altsetting(data, 1)) {
 			set_bit(BTUSB_USE_ALT1_FOR_WBS, &data->flags);
-		else
+			hdev->sco_pkt_len = hci_packet_size_usb_alt[1];
+		} else
 			bt_dev_err(hdev, "Device does not support ALT setting 1");
 	}
 
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 8caac20556b499..0624496328fc09 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -417,6 +417,7 @@ struct hci_dev {
 	unsigned int	acl_pkts;
 	unsigned int	sco_pkts;
 	unsigned int	le_pkts;
+	unsigned int	sco_pkt_len;
 
 	__u16		block_len;
 	__u16		block_mtu;
-- 
2.28.0.236.gb10cc79966-goog


  reply	other threads:[~2020-08-13  8:42 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-13  8:41 [PATCH v1 0/2] To support the HFP WBS, a chip vendor may choose a particular Joseph Hwang
2020-08-13  8:41 ` Joseph Hwang [this message]
2020-08-14 20:07   ` [PATCH v1 1/2] Bluetooth: btusb: define HCI packet sizes of USB Alts Luiz Augusto von Dentz
2020-08-19 14:38     ` Pali Rohár
2020-08-13  8:41 ` [PATCH v1 2/2] Bluetooth: sco: expose WBS packet length in socket option Joseph Hwang
2020-08-14 19:56   ` Luiz Augusto von Dentz
2020-08-19 14:37     ` Pali Rohár
2020-08-19 18:21       ` Luiz Augusto von Dentz
2020-08-19 18:23         ` Pali Rohár
2020-08-19 18:25           ` Luiz Augusto von Dentz
2020-08-19  2:48 ` [PATCH v1 0/2] To support the HFP WBS, a chip vendor may choose a particular Shyh-In Hwang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200813164059.v1.1.I56de28ec171134cb9f97062e2c304a72822ca38b@changeid \
    --to=josephsih@chromium.org \
    --cc=abhishekpandit@chromium.org \
    --cc=alainm@chromium.org \
    --cc=chromeos-bluetooth-upstreaming@chromium.org \
    --cc=davem@davemloft.net \
    --cc=johan.hedberg@gmail.com \
    --cc=josephsih@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    --cc=netdev@vger.kernel.org \
    --subject='Re: [PATCH v1 1/2] Bluetooth: btusb: define HCI packet sizes of USB Alts' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).