Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: "David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Sergei Shtylyov <sergei.shtylyov@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Oleksij Rempel <linux@rempel-privat.de>,
	Philippe Schenker <philippe.schenker@toradex.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Dan Murphy <dmurphy@ti.com>,
	Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v3 0/7] net/ravb: Add support for explicit internal clock delay configuration
Date: Wed, 19 Aug 2020 15:43:37 +0200	[thread overview]
Message-ID: <20200819134344.27813-1-geert+renesas@glider.be> (raw)

	Hi all,

Some Renesas EtherAVB variants support internal clock delay
configuration, which can add larger delays than the delays that are
typically supported by the PHY (using an "rgmii-*id" PHY mode, and/or
"[rt]xc-skew-ps" properties).

Historically, the EtherAVB driver configured these delays based on the
"rgmii-*id" PHY mode.  This caused issues with PHY drivers that
implement PHY internal delays properly[1].  Hence a backwards-compatible
workaround was added by masking the PHY mode[2].

This patch series implements the next step of the plan outlined in [3],
and adds proper support for explicit configuration of the MAC internal
clock delays using new "[rt]x-internal-delay-ps" properties.  If none of
these properties is present, the driver falls back to the old handling.

This can be considered the MAC counterpart of commit 9150069bf5fc0e86
("dt-bindings: net: Add tx and rx internal delays"), which applies to
the PHY.  Note that unlike commit 92252eec913b2dd5 ("net: phy: Add a
helper to return the index for of the internal delay"), no helpers are
provided to parse the DT properties, as so far there is a single user
only, which supports only zero or a single fixed value.  Of course such
helpers can be added later, when the need arises, or when deemed useful
otherwise.

This series consists of 4 parts:
  1. DT binding updates documenting the new properties, for both the
     generic ethernet-controller and the EtherAVB-specific bindings,
     => intended to be merged through net-next.

  2. Conversion to json-schema of the Renesas EtherAVB DT bindings.
     Technically, the conversion is independent of all of the above.
     I included it in this series, as it shows how all sanity checks on
     "[rt]x-internal-delay-ps" values are implemented as DT binding
     checks.
     => intended to be merged through net-next, or devicetree (ignoring
        any conflict due to 1.).

  3. EtherAVB driver update implementing support for the new properties.
     => intended to be merged through net-next.

  4. DT updates, one for R-Car Gen3 and RZ/G2 SoC families each.
     => intended to be merged through renesas-devel and arm-soc, but
	only _after_ 3. has hit upstream.

Changes compared to v2[4]:
  - Update recently added board DTS files,
  - Add Reviewed-by.

Changes compared to v1[5]:
  - Added "[PATCH 1/7] dt-bindings: net: ethernet-controller: Add
    internal delay properties",
  - Replace "renesas,[rt]xc-delay-ps" by "[rt]x-internal-delay-ps",
  - Incorporated EtherAVB DT binding conversion to json-schema,
  - Add Reviewed-by.

Impacted, tested:
  - Salvator-X(S) with R-Car H3 ES1.0 and ES2.0, M3-W, and M3-N.

Not impacted, tested:
  - Ebisu with R-Car E3.

Impacted, not tested:
  - Salvator-X(S) with other SoC variants,
  - ULCB with R-Car H3/M3-W/M3-N variants,
  - V3MSK and Eagle with R-Car V3M,
  - Draak with R-Car V3H,
  - HiHope RZ/G2[MN] with RZ/G2M or RZ/G2N,
  - Beacon EmbeddedWorks RZ/G2M Development Kit.

To ease testing, I have pushed this series to the
topic/ravb-internal-clock-delays-v3 branch of my renesas-drivers
repository at
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git.

Thanks for your comments!

References:
  [1] Commit bcf3440c6dd78bfe ("net: phy: micrel: add phy-mode support
      for the KSZ9031 PHY")
  [2] Commit 9b23203c32ee02cd ("ravb: Mask PHY mode to avoid inserting
      delays twice").
      https://lore.kernel.org/r/20200529122540.31368-1-geert+renesas@glider.be/
  [3] https://lore.kernel.org/r/CAMuHMdU+MR-2tr3-pH55G0GqPG9HwH3XUd=8HZxprFDMGQeWUw@mail.gmail.com/
  [4] https://lore.kernel.org/linux-devicetree/20200706143529.18306-1-geert+renesas@glider.be/
  [5] https://lore.kernel.org/linux-devicetree/20200619191554.24942-1-geert+renesas@glider.be/

Geert Uytterhoeven (7):
  dt-bindings: net: ethernet-controller: Add internal delay properties
  dt-bindings: net: renesas,ravb: Document internal clock delay
    properties
  dt-bindings: net: renesas,etheravb: Convert to json-schema
  ravb: Split delay handling in parsing and applying
  ravb: Add support for explicit internal clock delay configuration
  arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay
    handling
  arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling

 .../bindings/net/ethernet-controller.yaml     |  14 +
 .../bindings/net/renesas,etheravb.yaml        | 261 ++++++++++++++++++
 .../devicetree/bindings/net/renesas,ravb.txt  | 134 ---------
 .../boot/dts/renesas/beacon-renesom-som.dtsi  |   3 +-
 .../boot/dts/renesas/hihope-rzg2-ex.dtsi      |   2 +-
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi     |   2 +
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi     |   2 +
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi     |   1 +
 arch/arm64/boot/dts/renesas/r8a774e1.dtsi     |   2 +
 arch/arm64/boot/dts/renesas/r8a77951.dtsi     |   2 +
 arch/arm64/boot/dts/renesas/r8a77960.dtsi     |   2 +
 arch/arm64/boot/dts/renesas/r8a77961.dtsi     |   2 +
 arch/arm64/boot/dts/renesas/r8a77965.dtsi     |   2 +
 .../arm64/boot/dts/renesas/r8a77970-eagle.dts |   3 +-
 .../arm64/boot/dts/renesas/r8a77970-v3msk.dts |   3 +-
 arch/arm64/boot/dts/renesas/r8a77970.dtsi     |   2 +
 arch/arm64/boot/dts/renesas/r8a77980.dtsi     |   2 +
 arch/arm64/boot/dts/renesas/r8a77990.dtsi     |   1 +
 arch/arm64/boot/dts/renesas/r8a77995.dtsi     |   1 +
 .../boot/dts/renesas/salvator-common.dtsi     |   2 +-
 arch/arm64/boot/dts/renesas/ulcb.dtsi         |   2 +-
 drivers/net/ethernet/renesas/ravb.h           |   5 +-
 drivers/net/ethernet/renesas/ravb_main.c      |  53 +++-
 23 files changed, 350 insertions(+), 153 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/renesas,etheravb.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/renesas,ravb.txt

-- 
2.17.1


             reply	other threads:[~2020-08-19 13:53 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-19 13:43 Geert Uytterhoeven [this message]
2020-08-19 13:43 ` [PATCH v3 1/7] dt-bindings: net: ethernet-controller: Add internal delay properties Geert Uytterhoeven
2020-08-24 17:55   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 2/7] dt-bindings: net: renesas,ravb: Document internal clock " Geert Uytterhoeven
2020-08-24 17:56   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 3/7] dt-bindings: net: renesas,etheravb: Convert to json-schema Geert Uytterhoeven
2020-08-24 17:57   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 4/7] ravb: Split delay handling in parsing and applying Geert Uytterhoeven
2020-08-24 17:57   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 5/7] ravb: Add support for explicit internal clock delay configuration Geert Uytterhoeven
2020-08-24 17:58   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 6/7] arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling Geert Uytterhoeven
2020-08-19 13:43 ` [PATCH v3 7/7] arm64: dts: renesas: rzg2: " Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200819134344.27813-1-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kazuya.mizuguchi.ks@renesas.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux@rempel-privat.de \
    --cc=magnus.damm@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=philippe.schenker@toradex.com \
    --cc=robh+dt@kernel.org \
    --cc=sergei.shtylyov@gmail.com \
    --cc=wsa+renesas@sang-engineering.com \
    --subject='Re: [PATCH v3 0/7] net/ravb: Add support for explicit internal clock delay configuration' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).