Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: "David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Sergei Shtylyov <sergei.shtylyov@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Oleksij Rempel <linux@rempel-privat.de>,
	Philippe Schenker <philippe.schenker@toradex.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Dan Murphy <dmurphy@ti.com>,
	Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v3 7/7] arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling
Date: Wed, 19 Aug 2020 15:43:44 +0200	[thread overview]
Message-ID: <20200819134344.27813-8-geert+renesas@glider.be> (raw)
In-Reply-To: <20200819134344.27813-1-geert+renesas@glider.be>

Some EtherAVB variants support internal clock delay configuration, which
can add larger delays than the delays that are typically supported by
the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
properties).

Historically, the EtherAVB driver configured these delays based on the
"rgmii-*id" PHY mode.  This was wrong, as these are meant solely for the
PHY, not for the MAC.  Hence properties were introduced for explicit
configuration of these delays.

Convert the RZ/G2 DTS files from the old to the new scheme:
  - Add default "rx-internal-delay-ps" and "tx-internal-delay-ps"
    properties to the SoC .dtsi files, to be overridden by board files
    where needed,
  - Convert board files from "rgmii-*id" PHY modes to "rgmii", adding
    the appropriate "rx-internal-delay-ps" and/or "tx-internal-delay-ps"
    overrides.

Notes:
  - RZ/G2E does not support TX internal delay handling.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
This depends on "[PATCH v3 5/7] ravb: Add support for explicit internal
clock delay configuration", and thus must not be applied before its
dependency has hit upstream.

v3:
  - Update new beacon-renesom-som.dtsi and r8a774e1.dtsi,

v2:
  - Replace "renesas,[rt]xc-delay-ps" by "[rt]x-internal-delay-ps".
---
 arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi | 3 ++-
 arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi     | 2 +-
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi           | 2 ++
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi           | 2 ++
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi           | 1 +
 arch/arm64/boot/dts/renesas/r8a774e1.dtsi           | 2 ++
 6 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 97272f5fa0abf92e..8ac167aa18f04743 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -55,7 +55,8 @@
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii-id";
+	rx-internal-delay-ps = <1800>;
+	tx-internal-delay-ps = <2000>;
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index 178401a34cbf8d38..46f1ca0b7ef5e7c2 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -19,7 +19,7 @@
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii-txid";
+	tx-internal-delay-ps = <2000>;
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 8e80f50132ad55f5..ed99863f1dd09fd0 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -1115,6 +1115,8 @@
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 49e5addcfd97af01..1c76de24d3ea4844 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -989,6 +989,8 @@
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 42171190cce4602d..9fdca4c55ba95608 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -960,6 +960,7 @@
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 0f86cfd524258353..0975bcbc3c502535 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -1139,6 +1139,8 @@
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.17.1


      parent reply	other threads:[~2020-08-19 13:51 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-19 13:43 [PATCH v3 0/7] net/ravb: Add support for explicit internal clock delay configuration Geert Uytterhoeven
2020-08-19 13:43 ` [PATCH v3 1/7] dt-bindings: net: ethernet-controller: Add internal delay properties Geert Uytterhoeven
2020-08-24 17:55   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 2/7] dt-bindings: net: renesas,ravb: Document internal clock " Geert Uytterhoeven
2020-08-24 17:56   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 3/7] dt-bindings: net: renesas,etheravb: Convert to json-schema Geert Uytterhoeven
2020-08-24 17:57   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 4/7] ravb: Split delay handling in parsing and applying Geert Uytterhoeven
2020-08-24 17:57   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 5/7] ravb: Add support for explicit internal clock delay configuration Geert Uytterhoeven
2020-08-24 17:58   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 6/7] arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling Geert Uytterhoeven
2020-08-19 13:43 ` Geert Uytterhoeven [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200819134344.27813-8-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kazuya.mizuguchi.ks@renesas.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux@rempel-privat.de \
    --cc=magnus.damm@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=philippe.schenker@toradex.com \
    --cc=robh+dt@kernel.org \
    --cc=sergei.shtylyov@gmail.com \
    --cc=wsa+renesas@sang-engineering.com \
    --subject='Re: [PATCH v3 7/7] arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).