[PATCH AUTOSEL 5.8 21/63] selftests/bpf: Fix segmentation fault in test_progs

[PATCH AUTOSEL 5.8 21/63] selftests/bpf: Fix segmentation fault in test_progs

[Sasha Levin]

From: Jianlin Lv <Jianlin.Lv@arm.com>

[ Upstream commit 0390c429dbed4068bd2cd8dded937d9a5ec24cd2 ]

test_progs reports the segmentation fault as below:

  $ sudo ./test_progs -t mmap --verbose
  test_mmap:PASS:skel_open_and_load 0 nsec
  [...]
  test_mmap:PASS:adv_mmap1 0 nsec
  test_mmap:PASS:adv_mmap2 0 nsec
  test_mmap:PASS:adv_mmap3 0 nsec
  test_mmap:PASS:adv_mmap4 0 nsec
  Segmentation fault

This issue was triggered because mmap() and munmap() used inconsistent
length parameters; mmap() creates a new mapping of 3 * page_size, but the
length parameter set in the subsequent re-map and munmap() functions is
4 * page_size; this leads to the destruction of the process space.

To fix this issue, first create 4 pages of anonymous mapping, then do all
the mmap() with MAP_FIXED.

Another issue is that when unmap the second page fails, the length
parameter to delete tmp1 mappings should be 4 * page_size.

Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200810153940.125508-1-Jianlin.Lv@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/mmap.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/mmap.c b/tools/testing/selftests/bpf/prog_tests/mmap.c
index 43d0b5578f461..9c3c5c0f068fb 100644
--- a/tools/testing/selftests/bpf/prog_tests/mmap.c
+++ b/tools/testing/selftests/bpf/prog_tests/mmap.c
@@ -21,7 +21,7 @@ void test_mmap(void)
 	const long page_size = sysconf(_SC_PAGE_SIZE);
 	int err, duration = 0, i, data_map_fd, data_map_id, tmp_fd, rdmap_fd;
 	struct bpf_map *data_map, *bss_map;
-	void *bss_mmaped = NULL, *map_mmaped = NULL, *tmp1, *tmp2;
+	void *bss_mmaped = NULL, *map_mmaped = NULL, *tmp0, *tmp1, *tmp2;
 	struct test_mmap__bss *bss_data;
 	struct bpf_map_info map_info;
 	__u32 map_info_sz = sizeof(map_info);
@@ -183,16 +183,23 @@ void test_mmap(void)
 
 	/* check some more advanced mmap() manipulations */
 
+	tmp0 = mmap(NULL, 4 * page_size, PROT_READ, MAP_SHARED | MAP_ANONYMOUS,
+			  -1, 0);
+	if (CHECK(tmp0 == MAP_FAILED, "adv_mmap0", "errno %d\n", errno))
+		goto cleanup;
+
 	/* map all but last page: pages 1-3 mapped */
-	tmp1 = mmap(NULL, 3 * page_size, PROT_READ, MAP_SHARED,
+	tmp1 = mmap(tmp0, 3 * page_size, PROT_READ, MAP_SHARED | MAP_FIXED,
 			  data_map_fd, 0);
-	if (CHECK(tmp1 == MAP_FAILED, "adv_mmap1", "errno %d\n", errno))
+	if (CHECK(tmp0 != tmp1, "adv_mmap1", "tmp0: %p, tmp1: %p\n", tmp0, tmp1)) {
+		munmap(tmp0, 4 * page_size);
 		goto cleanup;
+	}
 
 	/* unmap second page: pages 1, 3 mapped */
 	err = munmap(tmp1 + page_size, page_size);
 	if (CHECK(err, "adv_mmap2", "errno %d\n", errno)) {
-		munmap(tmp1, map_sz);
+		munmap(tmp1, 4 * page_size);
 		goto cleanup;
 	}
 
@@ -201,7 +208,7 @@ void test_mmap(void)
 		    MAP_SHARED | MAP_FIXED, data_map_fd, 0);
 	if (CHECK(tmp2 == MAP_FAILED, "adv_mmap3", "errno %d\n", errno)) {
 		munmap(tmp1, page_size);
-		munmap(tmp1 + 2*page_size, page_size);
+		munmap(tmp1 + 2*page_size, 2 * page_size);
 		goto cleanup;
 	}
 	CHECK(tmp1 + page_size != tmp2, "adv_mmap4",
@@ -211,7 +218,7 @@ void test_mmap(void)
 	tmp2 = mmap(tmp1, 4 * page_size, PROT_READ, MAP_SHARED | MAP_FIXED,
 		    data_map_fd, 0);
 	if (CHECK(tmp2 == MAP_FAILED, "adv_mmap5", "errno %d\n", errno)) {
-		munmap(tmp1, 3 * page_size); /* unmap page 1 */
+		munmap(tmp1, 4 * page_size); /* unmap page 1 */
 		goto cleanup;
 	}
 	CHECK(tmp1 != tmp2, "adv_mmap6", "tmp1: %p, tmp2: %p\n", tmp1, tmp2);
-- 
2.25.1

[PATCH AUTOSEL 5.8 22/63] libbpf: Handle GCC built-in types for Arm NEON

[Sasha Levin]

From: Jean-Philippe Brucker <jean-philippe@linaro.org>

[ Upstream commit 702eddc77a905782083b14ccd05b23840675fd18 ]

When building Arm NEON (SIMD) code from lib/raid6/neon.uc, GCC emits
DWARF information using a base type "__Poly8_t", which is internal to
GCC and not recognized by Clang. This causes build failures when
building with Clang a vmlinux.h generated from an arm64 kernel that was
built with GCC.

	vmlinux.h:47284:9: error: unknown type name '__Poly8_t'
	typedef __Poly8_t poly8x16_t[16];
	        ^~~~~~~~~

The polyX_t types are defined as unsigned integers in the "Arm C
Language Extension" document (101028_Q220_00_en). Emit typedefs based on
standard integer types for the GCC internal types, similar to those
emitted by Clang.

Including linux/kernel.h to use ARRAY_SIZE() incidentally redefined
max(), causing a build bug due to different types, hence the seemingly
unrelated change.

Reported-by: Jakov Petrina <jakov.petrina@sartura.hr>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200812143909.3293280-1-jean-philippe@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/btf_dump.c | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/tools/lib/bpf/btf_dump.c b/tools/lib/bpf/btf_dump.c
index bbb4303172606..4edf76c5a7101 100644
--- a/tools/lib/bpf/btf_dump.c
+++ b/tools/lib/bpf/btf_dump.c
@@ -13,6 +13,7 @@
 #include <errno.h>
 #include <linux/err.h>
 #include <linux/btf.h>
+#include <linux/kernel.h>
 #include "btf.h"
 #include "hashmap.h"
 #include "libbpf.h"
@@ -548,6 +549,9 @@ static int btf_dump_order_type(struct btf_dump *d, __u32 id, bool through_ptr)
 	}
 }
 
+static void btf_dump_emit_missing_aliases(struct btf_dump *d, __u32 id,
+					  const struct btf_type *t);
+
 static void btf_dump_emit_struct_fwd(struct btf_dump *d, __u32 id,
 				     const struct btf_type *t);
 static void btf_dump_emit_struct_def(struct btf_dump *d, __u32 id,
@@ -670,6 +674,9 @@ static void btf_dump_emit_type(struct btf_dump *d, __u32 id, __u32 cont_id)
 
 	switch (kind) {
 	case BTF_KIND_INT:
+		/* Emit type alias definitions if necessary */
+		btf_dump_emit_missing_aliases(d, id, t);
+
 		tstate->emit_state = EMITTED;
 		break;
 	case BTF_KIND_ENUM:
@@ -869,7 +876,7 @@ static void btf_dump_emit_struct_def(struct btf_dump *d,
 			btf_dump_printf(d, ": %d", m_sz);
 			off = m_off + m_sz;
 		} else {
-			m_sz = max(0, btf__resolve_size(d->btf, m->type));
+			m_sz = max(0LL, btf__resolve_size(d->btf, m->type));
 			off = m_off + m_sz * 8;
 		}
 		btf_dump_printf(d, ";");
@@ -889,6 +896,32 @@ static void btf_dump_emit_struct_def(struct btf_dump *d,
 		btf_dump_printf(d, " __attribute__((packed))");
 }
 
+static const char *missing_base_types[][2] = {
+	/*
+	 * GCC emits typedefs to its internal __PolyX_t types when compiling Arm
+	 * SIMD intrinsics. Alias them to standard base types.
+	 */
+	{ "__Poly8_t",		"unsigned char" },
+	{ "__Poly16_t",		"unsigned short" },
+	{ "__Poly64_t",		"unsigned long long" },
+	{ "__Poly128_t",	"unsigned __int128" },
+};
+
+static void btf_dump_emit_missing_aliases(struct btf_dump *d, __u32 id,
+					  const struct btf_type *t)
+{
+	const char *name = btf_dump_type_name(d, id);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(missing_base_types); i++) {
+		if (strcmp(name, missing_base_types[i][0]) == 0) {
+			btf_dump_printf(d, "typedef %s %s;\n\n",
+					missing_base_types[i][1], name);
+			break;
+		}
+	}
+}
+
 static void btf_dump_emit_enum_fwd(struct btf_dump *d, __u32 id,
 				   const struct btf_type *t)
 {
-- 
2.25.1

[PATCH AUTOSEL 5.8 23/63] netfilter: avoid ipv6 -> nf_defrag_ipv6 module dependency

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit 2404b73c3f1a5f15726c6ecd226b56f6f992767f ]

nf_ct_frag6_gather is part of nf_defrag_ipv6.ko, not ipv6 core.

The current use of the netfilter ipv6 stub indirections  causes a module
dependency between ipv6 and nf_defrag_ipv6.

This prevents nf_defrag_ipv6 module from being removed because ipv6 can't
be unloaded.

Remove the indirection and always use a direct call.  This creates a
depency from nf_conntrack_bridge to nf_defrag_ipv6 instead:

modinfo nf_conntrack
depends:        nf_conntrack,nf_defrag_ipv6,bridge

.. and nf_conntrack already depends on nf_defrag_ipv6 anyway.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/netfilter_ipv6.h             | 18 ------------------
 net/bridge/netfilter/nf_conntrack_bridge.c |  8 ++++++--
 net/ipv6/netfilter.c                       |  3 ---
 3 files changed, 6 insertions(+), 23 deletions(-)

diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h
index aac42c28fe62d..9b67394471e1c 100644
--- a/include/linux/netfilter_ipv6.h
+++ b/include/linux/netfilter_ipv6.h
@@ -58,7 +58,6 @@ struct nf_ipv6_ops {
 			int (*output)(struct net *, struct sock *, struct sk_buff *));
 	int (*reroute)(struct sk_buff *skb, const struct nf_queue_entry *entry);
 #if IS_MODULE(CONFIG_IPV6)
-	int (*br_defrag)(struct net *net, struct sk_buff *skb, u32 user);
 	int (*br_fragment)(struct net *net, struct sock *sk,
 			   struct sk_buff *skb,
 			   struct nf_bridge_frag_data *data,
@@ -117,23 +116,6 @@ static inline int nf_ip6_route(struct net *net, struct dst_entry **dst,
 
 #include <net/netfilter/ipv6/nf_defrag_ipv6.h>
 
-static inline int nf_ipv6_br_defrag(struct net *net, struct sk_buff *skb,
-				    u32 user)
-{
-#if IS_MODULE(CONFIG_IPV6)
-	const struct nf_ipv6_ops *v6_ops = nf_get_ipv6_ops();
-
-	if (!v6_ops)
-		return 1;
-
-	return v6_ops->br_defrag(net, skb, user);
-#elif IS_BUILTIN(CONFIG_IPV6)
-	return nf_ct_frag6_gather(net, skb, user);
-#else
-	return 1;
-#endif
-}
-
 int br_ip6_fragment(struct net *net, struct sock *sk, struct sk_buff *skb,
 		    struct nf_bridge_frag_data *data,
 		    int (*output)(struct net *, struct sock *sk,
diff --git a/net/bridge/netfilter/nf_conntrack_bridge.c b/net/bridge/netfilter/nf_conntrack_bridge.c
index 8096732223828..8d033a75a766e 100644
--- a/net/bridge/netfilter/nf_conntrack_bridge.c
+++ b/net/bridge/netfilter/nf_conntrack_bridge.c
@@ -168,6 +168,7 @@ static unsigned int nf_ct_br_defrag4(struct sk_buff *skb,
 static unsigned int nf_ct_br_defrag6(struct sk_buff *skb,
 				     const struct nf_hook_state *state)
 {
+#if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6)
 	u16 zone_id = NF_CT_DEFAULT_ZONE_ID;
 	enum ip_conntrack_info ctinfo;
 	struct br_input_skb_cb cb;
@@ -180,14 +181,17 @@ static unsigned int nf_ct_br_defrag6(struct sk_buff *skb,
 
 	br_skb_cb_save(skb, &cb, sizeof(struct inet6_skb_parm));
 
-	err = nf_ipv6_br_defrag(state->net, skb,
-				IP_DEFRAG_CONNTRACK_BRIDGE_IN + zone_id);
+	err = nf_ct_frag6_gather(state->net, skb,
+				 IP_DEFRAG_CONNTRACK_BRIDGE_IN + zone_id);
 	/* queued */
 	if (err == -EINPROGRESS)
 		return NF_STOLEN;
 
 	br_skb_cb_restore(skb, &cb, IP6CB(skb)->frag_max_size);
 	return err == 0 ? NF_ACCEPT : NF_DROP;
+#else
+	return NF_ACCEPT;
+#endif
 }
 
 static int nf_ct_br_ip_check(const struct sk_buff *skb)
diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c
index 409e79b84a830..6d0e942d082d4 100644
--- a/net/ipv6/netfilter.c
+++ b/net/ipv6/netfilter.c
@@ -245,9 +245,6 @@ static const struct nf_ipv6_ops ipv6ops = {
 	.route_input		= ip6_route_input,
 	.fragment		= ip6_fragment,
 	.reroute		= nf_ip6_reroute,
-#if IS_MODULE(CONFIG_IPV6) && IS_ENABLED(CONFIG_NF_DEFRAG_IPV6)
-	.br_defrag		= nf_ct_frag6_gather,
-#endif
 #if IS_MODULE(CONFIG_IPV6)
 	.br_fragment		= br_ip6_fragment,
 #endif
-- 
2.25.1

[PATCH AUTOSEL 5.8 24/63] libbpf: Prevent overriding errno when logging errors

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 23ab656be263813acc3c20623757d3cd1496d9e1 ]

Turns out there were a few more instances where libbpf didn't save the
errno before writing an error message, causing errno to be overridden by
the printf() return and the error disappearing if logging is enabled.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200813142905.160381-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index 11e4725b8b1c0..e8e88c1ab69de 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -3319,10 +3319,11 @@ bpf_object__probe_global_data(struct bpf_object *obj)
 
 	map = bpf_create_map_xattr(&map_attr);
 	if (map < 0) {
-		cp = libbpf_strerror_r(errno, errmsg, sizeof(errmsg));
+		ret = -errno;
+		cp = libbpf_strerror_r(ret, errmsg, sizeof(errmsg));
 		pr_warn("Error in %s():%s(%d). Couldn't create simple array map.\n",
-			__func__, cp, errno);
-		return -errno;
+			__func__, cp, -ret);
+		return ret;
 	}
 
 	insns[0].imm = map;
@@ -5775,9 +5776,10 @@ int bpf_program__pin_instance(struct bpf_program *prog, const char *path,
 	}
 
 	if (bpf_obj_pin(prog->instances.fds[instance], path)) {
-		cp = libbpf_strerror_r(errno, errmsg, sizeof(errmsg));
+		err = -errno;
+		cp = libbpf_strerror_r(err, errmsg, sizeof(errmsg));
 		pr_warn("failed to pin program: %s\n", cp);
-		return -errno;
+		return err;
 	}
 	pr_debug("pinned program '%s'\n", path);
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 25/63] tools/bpftool: Fix compilation warnings in 32-bit mode

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 09f44b753a7d120becc80213c3459183c8acd26b ]

Fix few compilation warnings in bpftool when compiling in 32-bit mode.
Abstract away u64 to pointer conversion into a helper function.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-2-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/bpftool/btf_dumper.c |  2 +-
 tools/bpf/bpftool/link.c       |  4 ++--
 tools/bpf/bpftool/main.h       | 10 +++++++++-
 tools/bpf/bpftool/prog.c       | 16 ++++++++--------
 4 files changed, 20 insertions(+), 12 deletions(-)

diff --git a/tools/bpf/bpftool/btf_dumper.c b/tools/bpf/bpftool/btf_dumper.c
index ede162f83eea0..0e9310727281a 100644
--- a/tools/bpf/bpftool/btf_dumper.c
+++ b/tools/bpf/bpftool/btf_dumper.c
@@ -67,7 +67,7 @@ static int dump_prog_id_as_func_ptr(const struct btf_dumper *d,
 	if (!info->btf_id || !info->nr_func_info ||
 	    btf__get_from_id(info->btf_id, &prog_btf))
 		goto print;
-	finfo = (struct bpf_func_info *)info->func_info;
+	finfo = u64_to_ptr(info->func_info);
 	func_type = btf__type_by_id(prog_btf, finfo->type_id);
 	if (!func_type || !btf_is_func(func_type))
 		goto print;
diff --git a/tools/bpf/bpftool/link.c b/tools/bpf/bpftool/link.c
index fca57ee8fafe4..dea691c83afca 100644
--- a/tools/bpf/bpftool/link.c
+++ b/tools/bpf/bpftool/link.c
@@ -101,7 +101,7 @@ static int show_link_close_json(int fd, struct bpf_link_info *info)
 	switch (info->type) {
 	case BPF_LINK_TYPE_RAW_TRACEPOINT:
 		jsonw_string_field(json_wtr, "tp_name",
-				   (const char *)info->raw_tracepoint.tp_name);
+				   u64_to_ptr(info->raw_tracepoint.tp_name));
 		break;
 	case BPF_LINK_TYPE_TRACING:
 		err = get_prog_info(info->prog_id, &prog_info);
@@ -177,7 +177,7 @@ static int show_link_close_plain(int fd, struct bpf_link_info *info)
 	switch (info->type) {
 	case BPF_LINK_TYPE_RAW_TRACEPOINT:
 		printf("\n\ttp '%s'  ",
-		       (const char *)info->raw_tracepoint.tp_name);
+		       (const char *)u64_to_ptr(info->raw_tracepoint.tp_name));
 		break;
 	case BPF_LINK_TYPE_TRACING:
 		err = get_prog_info(info->prog_id, &prog_info);
diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h
index 5cdf0bc049bd9..5917484c2e027 100644
--- a/tools/bpf/bpftool/main.h
+++ b/tools/bpf/bpftool/main.h
@@ -21,7 +21,15 @@
 /* Make sure we do not use kernel-only integer typedefs */
 #pragma GCC poison u8 u16 u32 u64 s8 s16 s32 s64
 
-#define ptr_to_u64(ptr)	((__u64)(unsigned long)(ptr))
+static inline __u64 ptr_to_u64(const void *ptr)
+{
+	return (__u64)(unsigned long)ptr;
+}
+
+static inline void *u64_to_ptr(__u64 ptr)
+{
+	return (void *)(unsigned long)ptr;
+}
 
 #define NEXT_ARG()	({ argc--; argv++; if (argc < 0) usage(); })
 #define NEXT_ARGP()	({ (*argc)--; (*argv)++; if (*argc < 0) usage(); })
diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index a5eff83496f2d..2c6f7e160b248 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -537,14 +537,14 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 			p_info("no instructions returned");
 			return -1;
 		}
-		buf = (unsigned char *)(info->jited_prog_insns);
+		buf = u64_to_ptr(info->jited_prog_insns);
 		member_len = info->jited_prog_len;
 	} else {	/* DUMP_XLATED */
 		if (info->xlated_prog_len == 0 || !info->xlated_prog_insns) {
 			p_err("error retrieving insn dump: kernel.kptr_restrict set?");
 			return -1;
 		}
-		buf = (unsigned char *)info->xlated_prog_insns;
+		buf = u64_to_ptr(info->xlated_prog_insns);
 		member_len = info->xlated_prog_len;
 	}
 
@@ -553,7 +553,7 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 		return -1;
 	}
 
-	func_info = (void *)info->func_info;
+	func_info = u64_to_ptr(info->func_info);
 
 	if (info->nr_line_info) {
 		prog_linfo = bpf_prog_linfo__new(info);
@@ -571,7 +571,7 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 
 		n = write(fd, buf, member_len);
 		close(fd);
-		if (n != member_len) {
+		if (n != (ssize_t)member_len) {
 			p_err("error writing output file: %s",
 			      n < 0 ? strerror(errno) : "short write");
 			return -1;
@@ -601,13 +601,13 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 			__u32 i;
 			if (info->nr_jited_ksyms) {
 				kernel_syms_load(&dd);
-				ksyms = (__u64 *) info->jited_ksyms;
+				ksyms = u64_to_ptr(info->jited_ksyms);
 			}
 
 			if (json_output)
 				jsonw_start_array(json_wtr);
 
-			lens = (__u32 *) info->jited_func_lens;
+			lens = u64_to_ptr(info->jited_func_lens);
 			for (i = 0; i < info->nr_jited_func_lens; i++) {
 				if (ksyms) {
 					sym = kernel_syms_search(&dd, ksyms[i]);
@@ -668,7 +668,7 @@ prog_dump(struct bpf_prog_info *info, enum dump_mode mode,
 	} else {
 		kernel_syms_load(&dd);
 		dd.nr_jited_ksyms = info->nr_jited_ksyms;
-		dd.jited_ksyms = (__u64 *) info->jited_ksyms;
+		dd.jited_ksyms = u64_to_ptr(info->jited_ksyms);
 		dd.btf = btf;
 		dd.func_info = func_info;
 		dd.finfo_rec_size = info->func_info_rec_size;
@@ -1790,7 +1790,7 @@ static char *profile_target_name(int tgt_fd)
 		goto out;
 	}
 
-	func_info = (struct bpf_func_info *)(info_linear->info.func_info);
+	func_info = u64_to_ptr(info_linear->info.func_info);
 	t = btf__type_by_id(btf, func_info[0].type_id);
 	if (!t) {
 		p_err("btf %d doesn't have type %d",
-- 
2.25.1

[PATCH AUTOSEL 5.8 26/63] selftest/bpf: Fix compilation warnings in 32-bit mode

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 9028bbcc3e12510cac13a9554f1a1e39667a4387 ]

Fix compilation warnings emitted when compiling selftests for 32-bit platform
(x86 in my case).

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-3-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c     | 8 ++++----
 tools/testing/selftests/bpf/prog_tests/core_extern.c    | 4 ++--
 tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c  | 6 +++---
 tools/testing/selftests/bpf/prog_tests/flow_dissector.c | 2 +-
 tools/testing/selftests/bpf/prog_tests/global_data.c    | 6 +++---
 tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c | 2 +-
 tools/testing/selftests/bpf/prog_tests/skb_ctx.c        | 2 +-
 tools/testing/selftests/bpf/test_btf.c                  | 8 ++++----
 tools/testing/selftests/bpf/test_progs.h                | 5 +++++
 9 files changed, 24 insertions(+), 19 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c b/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c
index 7afa4160416f6..284d5921c3458 100644
--- a/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c
+++ b/tools/testing/selftests/bpf/prog_tests/bpf_obj_id.c
@@ -159,15 +159,15 @@ void test_bpf_obj_id(void)
 		/* Check getting link info */
 		info_len = sizeof(struct bpf_link_info) * 2;
 		bzero(&link_infos[i], info_len);
-		link_infos[i].raw_tracepoint.tp_name = (__u64)&tp_name;
+		link_infos[i].raw_tracepoint.tp_name = ptr_to_u64(&tp_name);
 		link_infos[i].raw_tracepoint.tp_name_len = sizeof(tp_name);
 		err = bpf_obj_get_info_by_fd(bpf_link__fd(links[i]),
 					     &link_infos[i], &info_len);
 		if (CHECK(err ||
 			  link_infos[i].type != BPF_LINK_TYPE_RAW_TRACEPOINT ||
 			  link_infos[i].prog_id != prog_infos[i].id ||
-			  link_infos[i].raw_tracepoint.tp_name != (__u64)&tp_name ||
-			  strcmp((char *)link_infos[i].raw_tracepoint.tp_name,
+			  link_infos[i].raw_tracepoint.tp_name != ptr_to_u64(&tp_name) ||
+			  strcmp(u64_to_ptr(link_infos[i].raw_tracepoint.tp_name),
 				 "sys_enter") ||
 			  info_len != sizeof(struct bpf_link_info),
 			  "get-link-info(fd)",
@@ -178,7 +178,7 @@ void test_bpf_obj_id(void)
 			  link_infos[i].type, BPF_LINK_TYPE_RAW_TRACEPOINT,
 			  link_infos[i].id,
 			  link_infos[i].prog_id, prog_infos[i].id,
-			  (char *)link_infos[i].raw_tracepoint.tp_name,
+			  (const char *)u64_to_ptr(link_infos[i].raw_tracepoint.tp_name),
 			  "sys_enter"))
 			goto done;
 
diff --git a/tools/testing/selftests/bpf/prog_tests/core_extern.c b/tools/testing/selftests/bpf/prog_tests/core_extern.c
index b093787e94489..1931a158510e0 100644
--- a/tools/testing/selftests/bpf/prog_tests/core_extern.c
+++ b/tools/testing/selftests/bpf/prog_tests/core_extern.c
@@ -159,8 +159,8 @@ void test_core_extern(void)
 		exp = (uint64_t *)&t->data;
 		for (j = 0; j < n; j++) {
 			CHECK(got[j] != exp[j], "check_res",
-			      "result #%d: expected %lx, but got %lx\n",
-			       j, exp[j], got[j]);
+			      "result #%d: expected %llx, but got %llx\n",
+			       j, (__u64)exp[j], (__u64)got[j]);
 		}
 cleanup:
 		test_core_extern__destroy(skel);
diff --git a/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c b/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c
index a895bfed55db0..197d0d217b56b 100644
--- a/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c
+++ b/tools/testing/selftests/bpf/prog_tests/fexit_bpf2bpf.c
@@ -16,7 +16,7 @@ static void test_fexit_bpf2bpf_common(const char *obj_file,
 	__u32 duration = 0, retval;
 	struct bpf_map *data_map;
 	const int zero = 0;
-	u64 *result = NULL;
+	__u64 *result = NULL;
 
 	err = bpf_prog_load(target_obj_file, BPF_PROG_TYPE_UNSPEC,
 			    &pkt_obj, &pkt_fd);
@@ -29,7 +29,7 @@ static void test_fexit_bpf2bpf_common(const char *obj_file,
 
 	link = calloc(sizeof(struct bpf_link *), prog_cnt);
 	prog = calloc(sizeof(struct bpf_program *), prog_cnt);
-	result = malloc((prog_cnt + 32 /* spare */) * sizeof(u64));
+	result = malloc((prog_cnt + 32 /* spare */) * sizeof(__u64));
 	if (CHECK(!link || !prog || !result, "alloc_memory",
 		  "failed to alloc memory"))
 		goto close_prog;
@@ -72,7 +72,7 @@ static void test_fexit_bpf2bpf_common(const char *obj_file,
 		goto close_prog;
 
 	for (i = 0; i < prog_cnt; i++)
-		if (CHECK(result[i] != 1, "result", "fexit_bpf2bpf failed err %ld\n",
+		if (CHECK(result[i] != 1, "result", "fexit_bpf2bpf failed err %llu\n",
 			  result[i]))
 			goto close_prog;
 
diff --git a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
index f11f187990e95..cd6dc80edf18e 100644
--- a/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
+++ b/tools/testing/selftests/bpf/prog_tests/flow_dissector.c
@@ -591,7 +591,7 @@ void test_flow_dissector(void)
 		CHECK_ATTR(tattr.data_size_out != sizeof(flow_keys) ||
 			   err || tattr.retval != 1,
 			   tests[i].name,
-			   "err %d errno %d retval %d duration %d size %u/%lu\n",
+			   "err %d errno %d retval %d duration %d size %u/%zu\n",
 			   err, errno, tattr.retval, tattr.duration,
 			   tattr.data_size_out, sizeof(flow_keys));
 		CHECK_FLOW_KEYS(tests[i].name, flow_keys, tests[i].keys);
diff --git a/tools/testing/selftests/bpf/prog_tests/global_data.c b/tools/testing/selftests/bpf/prog_tests/global_data.c
index e3cb62b0a110e..9efa7e50eab27 100644
--- a/tools/testing/selftests/bpf/prog_tests/global_data.c
+++ b/tools/testing/selftests/bpf/prog_tests/global_data.c
@@ -5,7 +5,7 @@
 static void test_global_data_number(struct bpf_object *obj, __u32 duration)
 {
 	int i, err, map_fd;
-	uint64_t num;
+	__u64 num;
 
 	map_fd = bpf_find_map(__func__, obj, "result_number");
 	if (CHECK_FAIL(map_fd < 0))
@@ -14,7 +14,7 @@ static void test_global_data_number(struct bpf_object *obj, __u32 duration)
 	struct {
 		char *name;
 		uint32_t key;
-		uint64_t num;
+		__u64 num;
 	} tests[] = {
 		{ "relocate .bss reference",     0, 0 },
 		{ "relocate .data reference",    1, 42 },
@@ -32,7 +32,7 @@ static void test_global_data_number(struct bpf_object *obj, __u32 duration)
 	for (i = 0; i < sizeof(tests) / sizeof(tests[0]); i++) {
 		err = bpf_map_lookup_elem(map_fd, &tests[i].key, &num);
 		CHECK(err || num != tests[i].num, tests[i].name,
-		      "err %d result %lx expected %lx\n",
+		      "err %d result %llx expected %llx\n",
 		      err, num, tests[i].num);
 	}
 }
diff --git a/tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c b/tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c
index dde2b7ae7bc9e..935a294f049a2 100644
--- a/tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c
+++ b/tools/testing/selftests/bpf/prog_tests/prog_run_xattr.c
@@ -28,7 +28,7 @@ void test_prog_run_xattr(void)
 	      "err %d errno %d retval %d\n", err, errno, tattr.retval);
 
 	CHECK_ATTR(tattr.data_size_out != sizeof(pkt_v4), "data_size_out",
-	      "incorrect output size, want %lu have %u\n",
+	      "incorrect output size, want %zu have %u\n",
 	      sizeof(pkt_v4), tattr.data_size_out);
 
 	CHECK_ATTR(buf[5] != 0, "overflow",
diff --git a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
index 7021b92af3134..c61b2b69710a9 100644
--- a/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
+++ b/tools/testing/selftests/bpf/prog_tests/skb_ctx.c
@@ -80,7 +80,7 @@ void test_skb_ctx(void)
 
 	CHECK_ATTR(tattr.ctx_size_out != sizeof(skb),
 		   "ctx_size_out",
-		   "incorrect output size, want %lu have %u\n",
+		   "incorrect output size, want %zu have %u\n",
 		   sizeof(skb), tattr.ctx_size_out);
 
 	for (i = 0; i < 5; i++)
diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c
index 305fae8f80a98..c75fc6447186a 100644
--- a/tools/testing/selftests/bpf/test_btf.c
+++ b/tools/testing/selftests/bpf/test_btf.c
@@ -3883,7 +3883,7 @@ static int test_big_btf_info(unsigned int test_num)
 	info_garbage.garbage = 0;
 	err = bpf_obj_get_info_by_fd(btf_fd, info, &info_len);
 	if (CHECK(err || info_len != sizeof(*info),
-		  "err:%d errno:%d info_len:%u sizeof(*info):%lu",
+		  "err:%d errno:%d info_len:%u sizeof(*info):%zu",
 		  err, errno, info_len, sizeof(*info))) {
 		err = -1;
 		goto done;
@@ -4094,7 +4094,7 @@ static int do_test_get_info(unsigned int test_num)
 	if (CHECK(err || !info.id || info_len != sizeof(info) ||
 		  info.btf_size != raw_btf_size ||
 		  (ret = memcmp(raw_btf, user_btf, expected_nbytes)),
-		  "err:%d errno:%d info.id:%u info_len:%u sizeof(info):%lu raw_btf_size:%u info.btf_size:%u expected_nbytes:%u memcmp:%d",
+		  "err:%d errno:%d info.id:%u info_len:%u sizeof(info):%zu raw_btf_size:%u info.btf_size:%u expected_nbytes:%u memcmp:%d",
 		  err, errno, info.id, info_len, sizeof(info),
 		  raw_btf_size, info.btf_size, expected_nbytes, ret)) {
 		err = -1;
@@ -4730,7 +4730,7 @@ ssize_t get_pprint_expected_line(enum pprint_mapv_kind_t mapv_kind,
 
 		nexpected_line = snprintf(expected_line, line_size,
 					  "%s%u: {%u,0,%d,0x%x,0x%x,0x%x,"
-					  "{%lu|[%u,%u,%u,%u,%u,%u,%u,%u]},%s,"
+					  "{%llu|[%u,%u,%u,%u,%u,%u,%u,%u]},%s,"
 					  "%u,0x%x,[[%d,%d],[%d,%d]]}\n",
 					  percpu_map ? "\tcpu" : "",
 					  percpu_map ? cpu : next_key,
@@ -4738,7 +4738,7 @@ ssize_t get_pprint_expected_line(enum pprint_mapv_kind_t mapv_kind,
 					  v->unused_bits2a,
 					  v->bits28,
 					  v->unused_bits2b,
-					  v->ui64,
+					  (__u64)v->ui64,
 					  v->ui8a[0], v->ui8a[1],
 					  v->ui8a[2], v->ui8a[3],
 					  v->ui8a[4], v->ui8a[5],
diff --git a/tools/testing/selftests/bpf/test_progs.h b/tools/testing/selftests/bpf/test_progs.h
index b809246039181..b5670350e3263 100644
--- a/tools/testing/selftests/bpf/test_progs.h
+++ b/tools/testing/selftests/bpf/test_progs.h
@@ -133,6 +133,11 @@ static inline __u64 ptr_to_u64(const void *ptr)
 	return (__u64) (unsigned long) ptr;
 }
 
+static inline void *u64_to_ptr(__u64 ptr)
+{
+	return (void *) (unsigned long) ptr;
+}
+
 int bpf_find_map(const char *test, struct bpf_object *obj, const char *name);
 int compare_map_keys(int map1_fd, int map2_fd);
 int compare_stack_ips(int smap_fd, int amap_fd, int stack_trace_len);
-- 
2.25.1

[PATCH AUTOSEL 5.8 27/63] selftests/bpf: Fix btf_dump test cases on 32-bit arches

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit eed7818adf03e874994b966aa33bc00204dd275a ]

Fix btf_dump test cases by hard-coding BPF's pointer size of 8 bytes for cases
where it's impossible to deterimne the pointer size (no long type in BTF). In
cases where it's known, validate libbpf correctly determines it as 8.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-6-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/bpf/prog_tests/btf_dump.c       | 27 ++++++++++++++-----
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/btf_dump.c b/tools/testing/selftests/bpf/prog_tests/btf_dump.c
index cb33a7ee4e04f..39fb81d9daeb5 100644
--- a/tools/testing/selftests/bpf/prog_tests/btf_dump.c
+++ b/tools/testing/selftests/bpf/prog_tests/btf_dump.c
@@ -12,15 +12,16 @@ void btf_dump_printf(void *ctx, const char *fmt, va_list args)
 static struct btf_dump_test_case {
 	const char *name;
 	const char *file;
+	bool known_ptr_sz;
 	struct btf_dump_opts opts;
 } btf_dump_test_cases[] = {
-	{"btf_dump: syntax", "btf_dump_test_case_syntax", {}},
-	{"btf_dump: ordering", "btf_dump_test_case_ordering", {}},
-	{"btf_dump: padding", "btf_dump_test_case_padding", {}},
-	{"btf_dump: packing", "btf_dump_test_case_packing", {}},
-	{"btf_dump: bitfields", "btf_dump_test_case_bitfields", {}},
-	{"btf_dump: multidim", "btf_dump_test_case_multidim", {}},
-	{"btf_dump: namespacing", "btf_dump_test_case_namespacing", {}},
+	{"btf_dump: syntax", "btf_dump_test_case_syntax", true, {}},
+	{"btf_dump: ordering", "btf_dump_test_case_ordering", false, {}},
+	{"btf_dump: padding", "btf_dump_test_case_padding", true, {}},
+	{"btf_dump: packing", "btf_dump_test_case_packing", true, {}},
+	{"btf_dump: bitfields", "btf_dump_test_case_bitfields", true, {}},
+	{"btf_dump: multidim", "btf_dump_test_case_multidim", false, {}},
+	{"btf_dump: namespacing", "btf_dump_test_case_namespacing", false, {}},
 };
 
 static int btf_dump_all_types(const struct btf *btf,
@@ -62,6 +63,18 @@ static int test_btf_dump_case(int n, struct btf_dump_test_case *t)
 		goto done;
 	}
 
+	/* tests with t->known_ptr_sz have no "long" or "unsigned long" type,
+	 * so it's impossible to determine correct pointer size; but if they
+	 * do, it should be 8 regardless of host architecture, becaues BPF
+	 * target is always 64-bit
+	 */
+	if (!t->known_ptr_sz) {
+		btf__set_pointer_size(btf, 8);
+	} else {
+		CHECK(btf__pointer_size(btf) != 8, "ptr_sz", "exp %d, got %zu\n",
+		      8, btf__pointer_size(btf));
+	}
+
 	snprintf(out_file, sizeof(out_file), "/tmp/%s.output.XXXXXX", t->file);
 	fd = mkstemp(out_file);
 	if (CHECK(fd < 0, "create_tmp", "failed to create file: %d\n", fd)) {
-- 
2.25.1

[PATCH AUTOSEL 5.8 28/63] selftests/bpf: Correct various core_reloc 64-bit assumptions

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit 5705d705832f74395c5465ce93192688f543006a ]

Ensure that types are memory layout- and field alignment-compatible regardless
of 32/64-bitness mix of libbpf and BPF architecture.

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200813204945.1020225-8-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/bpf/prog_tests/core_reloc.c     | 20 +++---
 .../selftests/bpf/progs/core_reloc_types.h    | 69 ++++++++++---------
 2 files changed, 47 insertions(+), 42 deletions(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/core_reloc.c b/tools/testing/selftests/bpf/prog_tests/core_reloc.c
index 084ed26a7d78c..a54eafc5e4b31 100644
--- a/tools/testing/selftests/bpf/prog_tests/core_reloc.c
+++ b/tools/testing/selftests/bpf/prog_tests/core_reloc.c
@@ -237,8 +237,8 @@
 		.union_sz = sizeof(((type *)0)->union_field),		\
 		.arr_sz = sizeof(((type *)0)->arr_field),		\
 		.arr_elem_sz = sizeof(((type *)0)->arr_field[0]),	\
-		.ptr_sz = sizeof(((type *)0)->ptr_field),		\
-		.enum_sz = sizeof(((type *)0)->enum_field),	\
+		.ptr_sz = 8, /* always 8-byte pointer for BPF */	\
+		.enum_sz = sizeof(((type *)0)->enum_field),		\
 	}
 
 #define SIZE_CASE(name) {						\
@@ -432,20 +432,20 @@ static struct core_reloc_test_case test_cases[] = {
 		.sb4 = -1,
 		.sb20 = -0x17654321,
 		.u32 = 0xBEEF,
-		.s32 = -0x3FEDCBA987654321,
+		.s32 = -0x3FEDCBA987654321LL,
 	}),
 	BITFIELDS_CASE(bitfields___bitfield_vs_int, {
-		.ub1 = 0xFEDCBA9876543210,
+		.ub1 = 0xFEDCBA9876543210LL,
 		.ub2 = 0xA6,
-		.ub7 = -0x7EDCBA987654321,
-		.sb4 = -0x6123456789ABCDE,
-		.sb20 = 0xD00D,
+		.ub7 = -0x7EDCBA987654321LL,
+		.sb4 = -0x6123456789ABCDELL,
+		.sb20 = 0xD00DLL,
 		.u32 = -0x76543,
-		.s32 = 0x0ADEADBEEFBADB0B,
+		.s32 = 0x0ADEADBEEFBADB0BLL,
 	}),
 	BITFIELDS_CASE(bitfields___just_big_enough, {
-		.ub1 = 0xF,
-		.ub2 = 0x0812345678FEDCBA,
+		.ub1 = 0xFLL,
+		.ub2 = 0x0812345678FEDCBALL,
 	}),
 	BITFIELDS_ERR_CASE(bitfields___err_too_big_bitfield),
 
diff --git a/tools/testing/selftests/bpf/progs/core_reloc_types.h b/tools/testing/selftests/bpf/progs/core_reloc_types.h
index 34d84717c9464..69139ed662164 100644
--- a/tools/testing/selftests/bpf/progs/core_reloc_types.h
+++ b/tools/testing/selftests/bpf/progs/core_reloc_types.h
@@ -1,5 +1,10 @@
 #include <stdint.h>
 #include <stdbool.h>
+
+void preserce_ptr_sz_fn(long x) {}
+
+#define __bpf_aligned __attribute__((aligned(8)))
+
 /*
  * KERNEL
  */
@@ -444,51 +449,51 @@ struct core_reloc_primitives {
 	char a;
 	int b;
 	enum core_reloc_primitives_enum c;
-	void *d;
-	int (*f)(const char *);
+	void *d __bpf_aligned;
+	int (*f)(const char *) __bpf_aligned;
 };
 
 struct core_reloc_primitives___diff_enum_def {
 	char a;
 	int b;
-	void *d;
-	int (*f)(const char *);
+	void *d __bpf_aligned;
+	int (*f)(const char *) __bpf_aligned;
 	enum {
 		X = 100,
 		Y = 200,
-	} c; /* inline enum def with differing set of values */
+	} c __bpf_aligned; /* inline enum def with differing set of values */
 };
 
 struct core_reloc_primitives___diff_func_proto {
-	void (*f)(int); /* incompatible function prototype */
-	void *d;
-	enum core_reloc_primitives_enum c;
+	void (*f)(int) __bpf_aligned; /* incompatible function prototype */
+	void *d __bpf_aligned;
+	enum core_reloc_primitives_enum c __bpf_aligned;
 	int b;
 	char a;
 };
 
 struct core_reloc_primitives___diff_ptr_type {
-	const char * const d; /* different pointee type + modifiers */
-	char a;
+	const char * const d __bpf_aligned; /* different pointee type + modifiers */
+	char a __bpf_aligned;
 	int b;
 	enum core_reloc_primitives_enum c;
-	int (*f)(const char *);
+	int (*f)(const char *) __bpf_aligned;
 };
 
 struct core_reloc_primitives___err_non_enum {
 	char a[1];
 	int b;
 	int c; /* int instead of enum */
-	void *d;
-	int (*f)(const char *);
+	void *d __bpf_aligned;
+	int (*f)(const char *) __bpf_aligned;
 };
 
 struct core_reloc_primitives___err_non_int {
 	char a[1];
-	int *b; /* ptr instead of int */
-	enum core_reloc_primitives_enum c;
-	void *d;
-	int (*f)(const char *);
+	int *b __bpf_aligned; /* ptr instead of int */
+	enum core_reloc_primitives_enum c __bpf_aligned;
+	void *d __bpf_aligned;
+	int (*f)(const char *) __bpf_aligned;
 };
 
 struct core_reloc_primitives___err_non_ptr {
@@ -496,7 +501,7 @@ struct core_reloc_primitives___err_non_ptr {
 	int b;
 	enum core_reloc_primitives_enum c;
 	int d; /* int instead of ptr */
-	int (*f)(const char *);
+	int (*f)(const char *) __bpf_aligned;
 };
 
 /*
@@ -507,7 +512,7 @@ struct core_reloc_mods_output {
 };
 
 typedef const int int_t;
-typedef const char *char_ptr_t;
+typedef const char *char_ptr_t __bpf_aligned;
 typedef const int arr_t[7];
 
 struct core_reloc_mods_substruct {
@@ -523,9 +528,9 @@ typedef struct {
 struct core_reloc_mods {
 	int a;
 	int_t b;
-	char *c;
+	char *c __bpf_aligned;
 	char_ptr_t d;
-	int e[3];
+	int e[3] __bpf_aligned;
 	arr_t f;
 	struct core_reloc_mods_substruct g;
 	core_reloc_mods_substruct_t h;
@@ -535,9 +540,9 @@ struct core_reloc_mods {
 struct core_reloc_mods___mod_swap {
 	int b;
 	int_t a;
-	char *d;
+	char *d __bpf_aligned;
 	char_ptr_t c;
-	int f[3];
+	int f[3] __bpf_aligned;
 	arr_t e;
 	struct {
 		int y;
@@ -555,7 +560,7 @@ typedef arr1_t arr2_t;
 typedef arr2_t arr3_t;
 typedef arr3_t arr4_t;
 
-typedef const char * const volatile fancy_char_ptr_t;
+typedef const char * const volatile fancy_char_ptr_t __bpf_aligned;
 
 typedef core_reloc_mods_substruct_t core_reloc_mods_substruct_tt;
 
@@ -567,7 +572,7 @@ struct core_reloc_mods___typedefs {
 	arr4_t e;
 	fancy_char_ptr_t d;
 	fancy_char_ptr_t c;
-	int3_t b;
+	int3_t b __bpf_aligned;
 	int3_t a;
 };
 
@@ -739,19 +744,19 @@ struct core_reloc_bitfields___bit_sz_change {
 	int8_t		sb4: 1;		/*  4 ->  1 */
 	int32_t		sb20: 30;	/* 20 -> 30 */
 	/* non-bitfields */
-	uint16_t	u32;		/* 32 -> 16 */
-	int64_t		s32;		/* 32 -> 64 */
+	uint16_t	u32;			/* 32 -> 16 */
+	int64_t		s32 __bpf_aligned;	/* 32 -> 64 */
 };
 
 /* turn bitfield into non-bitfield and vice versa */
 struct core_reloc_bitfields___bitfield_vs_int {
 	uint64_t	ub1;		/*  3 -> 64 non-bitfield */
 	uint8_t		ub2;		/* 20 ->  8 non-bitfield */
-	int64_t		ub7;		/*  7 -> 64 non-bitfield signed */
-	int64_t		sb4;		/*  4 -> 64 non-bitfield signed */
-	uint64_t	sb20;		/* 20 -> 16 non-bitfield unsigned */
-	int32_t		u32: 20;	/* 32 non-bitfield -> 20 bitfield */
-	uint64_t	s32: 60;	/* 32 non-bitfield -> 60 bitfield */
+	int64_t		ub7 __bpf_aligned;	/*  7 -> 64 non-bitfield signed */
+	int64_t		sb4 __bpf_aligned;	/*  4 -> 64 non-bitfield signed */
+	uint64_t	sb20 __bpf_aligned;	/* 20 -> 16 non-bitfield unsigned */
+	int32_t		u32: 20;		/* 32 non-bitfield -> 20 bitfield */
+	uint64_t	s32: 60 __bpf_aligned;	/* 32 non-bitfield -> 60 bitfield */
 };
 
 struct core_reloc_bitfields___just_big_enough {
-- 
2.25.1

[PATCH AUTOSEL 5.8 29/63] can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect corruptions

[Sasha Levin]

From: Oleksij Rempel <o.rempel@pengutronix.de>

[ Upstream commit e052d0540298bfe0f6cbbecdc7e2ea9b859575b2 ]

Since the stack relays on receiving own packets, it was overwriting own
transmit buffer from received packets.

At least theoretically, the received echo buffer can be corrupt or
changed and the session partner can request to resend previous data. In
this case we will re-send bad data.

With this patch we will stop to overwrite own TX buffer and use it for
sanity checking.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20200807105200.26441-6-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/can/j1939/transport.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/net/can/j1939/transport.c b/net/can/j1939/transport.c
index 9f99af5b0b11e..3e9c377b0dcce 100644
--- a/net/can/j1939/transport.c
+++ b/net/can/j1939/transport.c
@@ -1769,7 +1769,20 @@ static void j1939_xtp_rx_dat_one(struct j1939_session *session,
 	}
 
 	tpdat = se_skb->data;
-	memcpy(&tpdat[offset], &dat[1], nbytes);
+	if (!session->transmission) {
+		memcpy(&tpdat[offset], &dat[1], nbytes);
+	} else {
+		int err;
+
+		err = memcmp(&tpdat[offset], &dat[1], nbytes);
+		if (err)
+			netdev_err_once(priv->ndev,
+					"%s: 0x%p: Data of RX-looped back packet (%*ph) doesn't match TX data (%*ph)!\n",
+					__func__, session,
+					nbytes, &dat[1],
+					nbytes, &tpdat[offset]);
+	}
+
 	if (packet == session->pkt.rx)
 		session->pkt.rx++;
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 32/63] drivers/net/wan/hdlc_x25: Added needed_headroom and a skb->len check

[Sasha Levin]

From: Xie He <xie.he.0141@gmail.com>

[ Upstream commit 77b981c82c1df7c7ad32a046f17f007450b46954 ]

1. Added a skb->len check

This driver expects upper layers to include a pseudo header of 1 byte
when passing down a skb for transmission. This driver will read this
1-byte header. This patch added a skb->len check before reading the
header to make sure the header exists.

2. Added needed_headroom and set hard_header_len to 0

When this driver transmits data,
  first this driver will remove a pseudo header of 1 byte,
  then the lapb module will prepend the LAPB header of 2 or 3 bytes.
So the value of needed_headroom in this driver should be 3 - 1.

Because this driver has no header_ops, according to the logic of
af_packet.c, the value of hard_header_len should be 0.

Reason of setting needed_headroom and hard_header_len at this place:

This driver is written using the API of the hdlc module, the hdlc
module enables this driver (the protocol driver) to run on any hardware
that has a driver (the hardware driver) written using the API of the
hdlc module.

Two other hdlc protocol drivers - hdlc_ppp and hdlc_raw_eth, also set
things like hard_header_len at this place. In hdlc_ppp, it sets
hard_header_len after attach_hdlc_protocol and before setting dev->type.
In hdlc_raw_eth, it sets hard_header_len by calling ether_setup after
attach_hdlc_protocol and after memcpy the settings.

3. Reset needed_headroom when detaching protocols (in hdlc.c)

When detaching a protocol from a hardware device, the hdlc module will
reset various parameters of the device (including hard_header_len) to
the default values. We add needed_headroom here so that needed_headroom
will also be reset.

Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: Andrew Hendry <andrew.hendry@gmail.com>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wan/hdlc.c     |  1 +
 drivers/net/wan/hdlc_x25.c | 17 ++++++++++++++++-
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index dfc16770458d8..386ed2aa31fd9 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -230,6 +230,7 @@ static void hdlc_setup_dev(struct net_device *dev)
 	dev->max_mtu		 = HDLC_MAX_MTU;
 	dev->type		 = ARPHRD_RAWHDLC;
 	dev->hard_header_len	 = 16;
+	dev->needed_headroom	 = 0;
 	dev->addr_len		 = 0;
 	dev->header_ops		 = &hdlc_null_ops;
 }
diff --git a/drivers/net/wan/hdlc_x25.c b/drivers/net/wan/hdlc_x25.c
index f70336bb6f524..f52b9fed05931 100644
--- a/drivers/net/wan/hdlc_x25.c
+++ b/drivers/net/wan/hdlc_x25.c
@@ -107,8 +107,14 @@ static netdev_tx_t x25_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	int result;
 
+	/* There should be a pseudo header of 1 byte added by upper layers.
+	 * Check to make sure it is there before reading it.
+	 */
+	if (skb->len < 1) {
+		kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
 
-	/* X.25 to LAPB */
 	switch (skb->data[0]) {
 	case X25_IFACE_DATA:	/* Data to be transmitted */
 		skb_pull(skb, 1);
@@ -294,6 +300,15 @@ static int x25_ioctl(struct net_device *dev, struct ifreq *ifr)
 			return result;
 
 		memcpy(&state(hdlc)->settings, &new_settings, size);
+
+		/* There's no header_ops so hard_header_len should be 0. */
+		dev->hard_header_len = 0;
+		/* When transmitting data:
+		 * first we'll remove a pseudo header of 1 byte,
+		 * then we'll prepend an LAPB header of at most 3 bytes.
+		 */
+		dev->needed_headroom = 3 - 1;
+
 		dev->type = ARPHRD_X25;
 		call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev);
 		netif_dormant_off(dev);
-- 
2.25.1

[PATCH AUTOSEL 5.8 37/63] selftests: disable rp_filter for icmp_redirect.sh

[Sasha Levin]

From: David Ahern <dsahern@kernel.org>

[ Upstream commit bcf7ddb0186d366f761f86196b480ea6dd2dc18c ]

h1 is initially configured to reach h2 via r1 rather than the
more direct path through r2. If rp_filter is set and inherited
for r2, forwarding fails since the source address of h1 is
reachable from eth0 vs the packet coming to it via r1 and eth1.
Since rp_filter setting affects the test, explicitly reset it.

Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/net/icmp_redirect.sh | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/tools/testing/selftests/net/icmp_redirect.sh b/tools/testing/selftests/net/icmp_redirect.sh
index 18c5de53558af..bf361f30d6ef9 100755
--- a/tools/testing/selftests/net/icmp_redirect.sh
+++ b/tools/testing/selftests/net/icmp_redirect.sh
@@ -180,6 +180,8 @@ setup()
 			;;
 		r[12]) ip netns exec $ns sysctl -q -w net.ipv4.ip_forward=1
 		       ip netns exec $ns sysctl -q -w net.ipv4.conf.all.send_redirects=1
+		       ip netns exec $ns sysctl -q -w net.ipv4.conf.default.rp_filter=0
+		       ip netns exec $ns sysctl -q -w net.ipv4.conf.all.rp_filter=0
 
 		       ip netns exec $ns sysctl -q -w net.ipv6.conf.all.forwarding=1
 		       ip netns exec $ns sysctl -q -w net.ipv6.route.mtu_expires=10
-- 
2.25.1

[PATCH AUTOSEL 5.8 38/63] scsi: fcoe: Fix I/O path allocation

[Sasha Levin]

From: Mike Christie <michael.christie@oracle.com>

[ Upstream commit fa39ab5184d64563cd36f2fb5f0d3fbad83a432c ]

ixgbe_fcoe_ddp_setup() can be called from the main I/O path and is called
with a spin_lock held, so we have to use GFP_ATOMIC allocation instead of
GFP_KERNEL.

Link: https://lore.kernel.org/r/1596831813-9839-1-git-send-email-michael.christie@oracle.com
cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index ec7a11d13fdc0..9e70b9a674409 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -192,7 +192,7 @@ static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
 	}
 
 	/* alloc the udl from per cpu ddp pool */
-	ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_KERNEL, &ddp->udp);
+	ddp->udl = dma_pool_alloc(ddp_pool->pool, GFP_ATOMIC, &ddp->udp);
 	if (!ddp->udl) {
 		e_err(drv, "failed allocated ddp context\n");
 		goto out_noddp_unmap;
-- 
2.25.1

[PATCH AUTOSEL 5.8 50/63] macvlan: validate setting of multiple remote source MAC addresses

[Sasha Levin]

From: Alvin Šipraga <alsi@bang-olufsen.dk>

[ Upstream commit 8b61fba503904acae24aeb2bd5569b4d6544d48f ]

Remote source MAC addresses can be set on a 'source mode' macvlan
interface via the IFLA_MACVLAN_MACADDR_DATA attribute. This commit
tightens the validation of these MAC addresses to match the validation
already performed when setting or adding a single MAC address via the
IFLA_MACVLAN_MACADDR attribute.

iproute2 uses IFLA_MACVLAN_MACADDR_DATA for its 'macvlan macaddr set'
command, and IFLA_MACVLAN_MACADDR for its 'macvlan macaddr add' command,
which demonstrates the inconsistent behaviour that this commit
addresses:

 # ip link add link eth0 name macvlan0 type macvlan mode source
 # ip link set link dev macvlan0 type macvlan macaddr add 01:00:00:00:00:00
 RTNETLINK answers: Cannot assign requested address
 # ip link set link dev macvlan0 type macvlan macaddr set 01:00:00:00:00:00
 # ip -d link show macvlan0
 5: macvlan0@eth0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500 ...
     link/ether 2e:ac:fd:2d:69:f8 brd ff:ff:ff:ff:ff:ff promiscuity 0
     macvlan mode source remotes (1) 01:00:00:00:00:00 numtxqueues 1 ...

With this change, the 'set' command will (rightly) fail in the same way
as the 'add' command.

Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macvlan.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 4942f6112e51f..5da04e9979894 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -1269,6 +1269,9 @@ static void macvlan_port_destroy(struct net_device *dev)
 static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[],
 			    struct netlink_ext_ack *extack)
 {
+	struct nlattr *nla, *head;
+	int rem, len;
+
 	if (tb[IFLA_ADDRESS]) {
 		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
 			return -EINVAL;
@@ -1316,6 +1319,20 @@ static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[],
 			return -EADDRNOTAVAIL;
 	}
 
+	if (data[IFLA_MACVLAN_MACADDR_DATA]) {
+		head = nla_data(data[IFLA_MACVLAN_MACADDR_DATA]);
+		len = nla_len(data[IFLA_MACVLAN_MACADDR_DATA]);
+
+		nla_for_each_attr(nla, head, len, rem) {
+			if (nla_type(nla) != IFLA_MACVLAN_MACADDR ||
+			    nla_len(nla) != ETH_ALEN)
+				return -EINVAL;
+
+			if (!is_valid_ether_addr(nla_data(nla)))
+				return -EADDRNOTAVAIL;
+		}
+	}
+
 	if (data[IFLA_MACVLAN_MACADDR_COUNT])
 		return -EINVAL;
 
@@ -1372,10 +1389,6 @@ static int macvlan_changelink_sources(struct macvlan_dev *vlan, u32 mode,
 		len = nla_len(data[IFLA_MACVLAN_MACADDR_DATA]);
 
 		nla_for_each_attr(nla, head, len, rem) {
-			if (nla_type(nla) != IFLA_MACVLAN_MACADDR ||
-			    nla_len(nla) != ETH_ALEN)
-				continue;
-
 			addr = nla_data(nla);
 			ret = macvlan_hash_add_source(vlan, addr);
 			if (ret)
-- 
2.25.1

[PATCH AUTOSEL 5.8 51/63] net: gianfar: Add of_node_put() before goto statement

[Sasha Levin]

From: Sumera Priyadarsini <sylphrenadin@gmail.com>

[ Upstream commit 989e4da042ca4a56bbaca9223d1a93639ad11e17 ]

Every iteration of for_each_available_child_of_node() decrements
reference count of the previous node, however when control
is transferred from the middle of the loop, as in the case of
a return or break or goto, there is no decrement thus ultimately
resulting in a memory leak.

Fix a potential memory leak in gianfar.c by inserting of_node_put()
before the goto statement.

Issue found with Coccinelle.

Signed-off-by: Sumera Priyadarsini <sylphrenadin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/gianfar.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index b513b8c5c3b5e..41dd3d0f34524 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -750,8 +750,10 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
 				continue;
 
 			err = gfar_parse_group(child, priv, model);
-			if (err)
+			if (err) {
+				of_node_put(child);
 				goto err_grp_init;
+			}
 		}
 	} else { /* SQ_SG_MODE */
 		err = gfar_parse_group(np, priv, model);
-- 
2.25.1

[PATCH AUTOSEL 5.8 55/63] bpf: Fix a rcu_sched stall issue with bpf task/task_file iterator

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit e679654a704e5bd676ea6446fa7b764cbabf168a ]

In our production system, we observed rcu stalls when
'bpftool prog` is running.
  rcu: INFO: rcu_sched self-detected stall on CPU
  rcu: \x097-....: (20999 ticks this GP) idle=302/1/0x4000000000000000 softirq=1508852/1508852 fqs=4913
  \x09(t=21031 jiffies g=2534773 q=179750)
  NMI backtrace for cpu 7
  CPU: 7 PID: 184195 Comm: bpftool Kdump: loaded Tainted: G        W         5.8.0-00004-g68bfc7f8c1b4 #6
  Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A17 05/03/2019
  Call Trace:
  <IRQ>
  dump_stack+0x57/0x70
  nmi_cpu_backtrace.cold+0x14/0x53
  ? lapic_can_unplug_cpu.cold+0x39/0x39
  nmi_trigger_cpumask_backtrace+0xb7/0xc7
  rcu_dump_cpu_stacks+0xa2/0xd0
  rcu_sched_clock_irq.cold+0x1ff/0x3d9
  ? tick_nohz_handler+0x100/0x100
  update_process_times+0x5b/0x90
  tick_sched_timer+0x5e/0xf0
  __hrtimer_run_queues+0x12a/0x2a0
  hrtimer_interrupt+0x10e/0x280
  __sysvec_apic_timer_interrupt+0x51/0xe0
  asm_call_on_stack+0xf/0x20
  </IRQ>
  sysvec_apic_timer_interrupt+0x6f/0x80
  asm_sysvec_apic_timer_interrupt+0x12/0x20
  RIP: 0010:task_file_seq_get_next+0x71/0x220
  Code: 00 00 8b 53 1c 49 8b 7d 00 89 d6 48 8b 47 20 44 8b 18 41 39 d3 76 75 48 8b 4f 20 8b 01 39 d0 76 61 41 89 d1 49 39 c1 48 19 c0 <48> 8b 49 08 21 d0 48 8d 04 c1 4c 8b 08 4d 85 c9 74 46 49 8b 41 38
  RSP: 0018:ffffc90006223e10 EFLAGS: 00000297
  RAX: ffffffffffffffff RBX: ffff888f0d172388 RCX: ffff888c8c07c1c0
  RDX: 00000000000f017b RSI: 00000000000f017b RDI: ffff888c254702c0
  RBP: ffffc90006223e68 R08: ffff888be2a1c140 R09: 00000000000f017b
  R10: 0000000000000002 R11: 0000000000100000 R12: ffff888f23c24118
  R13: ffffc90006223e60 R14: ffffffff828509a0 R15: 00000000ffffffff
  task_file_seq_next+0x52/0xa0
  bpf_seq_read+0xb9/0x320
  vfs_read+0x9d/0x180
  ksys_read+0x5f/0xe0
  do_syscall_64+0x38/0x60
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f8815f4f76e
  Code: c0 e9 f6 fe ff ff 55 48 8d 3d 76 70 0a 00 48 89 e5 e8 36 06 02 00 66 0f 1f 44 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00 f0 ff ff 77 52 c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5
  RSP: 002b:00007fff8f9df578 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
  RAX: ffffffffffffffda RBX: 000000000170b9c0 RCX: 00007f8815f4f76e
  RDX: 0000000000001000 RSI: 00007fff8f9df5b0 RDI: 0000000000000007
  RBP: 00007fff8f9e05f0 R08: 0000000000000049 R09: 0000000000000010
  R10: 00007f881601fa40 R11: 0000000000000246 R12: 00007fff8f9e05a8
  R13: 00007fff8f9e05a8 R14: 0000000001917f90 R15: 000000000000e22e

Note that `bpftool prog` actually calls a task_file bpf iterator
program to establish an association between prog/map/link/btf anon
files and processes.

In the case where the above rcu stall occured, we had a process
having 1587 tasks and each task having roughly 81305 files.
This implied 129 million bpf prog invocations. Unfortunwtely none of
these files are prog/map/link/btf files so bpf iterator/prog needs
to traverse all these files and not able to return to user space
since there are no seq_file buffer overflow.

This patch fixed the issue in bpf_seq_read() to limit the number
of visited objects. If the maximum number of visited objects is
reached, no more objects will be visited in the current syscall.
If there is nothing written in the seq_file buffer, -EAGAIN will
return to the user so user can try again.

The maximum number of visited objects is set at 1 million.
In our Intel Xeon D-2191 2.3GHZ 18-core server, bpf_seq_read()
visiting 1 million files takes around 0.18 seconds.

We did not use cond_resched() since for some iterators, e.g.,
netlink iterator, where rcu read_lock critical section spans between
consecutive seq_ops->next(), which makes impossible to do cond_resched()
in the key while loop of function bpf_seq_read().

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/bpf/20200818222309.2181348-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/bpf_iter.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/bpf_iter.c b/kernel/bpf/bpf_iter.c
index dd612b80b9fea..3c18090cd73dc 100644
--- a/kernel/bpf/bpf_iter.c
+++ b/kernel/bpf/bpf_iter.c
@@ -64,6 +64,9 @@ static void bpf_iter_done_stop(struct seq_file *seq)
 	iter_priv->done_stop = true;
 }
 
+/* maximum visited objects before bailing out */
+#define MAX_ITER_OBJECTS	1000000
+
 /* bpf_seq_read, a customized and simpler version for bpf iterator.
  * no_llseek is assumed for this file.
  * The following are differences from seq_read():
@@ -76,7 +79,7 @@ static ssize_t bpf_seq_read(struct file *file, char __user *buf, size_t size,
 {
 	struct seq_file *seq = file->private_data;
 	size_t n, offs, copied = 0;
-	int err = 0;
+	int err = 0, num_objs = 0;
 	void *p;
 
 	mutex_lock(&seq->lock);
@@ -132,6 +135,7 @@ static ssize_t bpf_seq_read(struct file *file, char __user *buf, size_t size,
 	while (1) {
 		loff_t pos = seq->index;
 
+		num_objs++;
 		offs = seq->count;
 		p = seq->op->next(seq, p, &seq->index);
 		if (pos == seq->index) {
@@ -150,6 +154,15 @@ static ssize_t bpf_seq_read(struct file *file, char __user *buf, size_t size,
 		if (seq->count >= size)
 			break;
 
+		if (num_objs >= MAX_ITER_OBJECTS) {
+			if (offs == 0) {
+				err = -EAGAIN;
+				seq->op->stop(seq, p);
+				goto done;
+			}
+			break;
+		}
+
 		err = seq->op->show(seq, p);
 		if (err > 0) {
 			bpf_iter_dec_seq_num(seq);
-- 
2.25.1

[PATCH AUTOSEL 5.8 56/63] bpf: Avoid visit same object multiple times

[Sasha Levin]

From: Yonghong Song <yhs@fb.com>

[ Upstream commit e60572b8d4c39572be6857d1ec91fdf979f8775f ]

Currently when traversing all tasks, the next tid
is always increased by one. This may result in
visiting the same task multiple times in a
pid namespace.

This patch fixed the issue by seting the next
tid as pid_nr_ns(pid, ns) + 1, similar to
funciton next_tgid().

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/bpf/20200818222310.2181500-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/task_iter.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/bpf/task_iter.c b/kernel/bpf/task_iter.c
index ac7869a389990..cd7d9564bcef6 100644
--- a/kernel/bpf/task_iter.c
+++ b/kernel/bpf/task_iter.c
@@ -28,8 +28,9 @@ static struct task_struct *task_seq_get_next(struct pid_namespace *ns,
 
 	rcu_read_lock();
 retry:
-	pid = idr_get_next(&ns->idr, tid);
+	pid = find_ge_pid(*tid, ns);
 	if (pid) {
+		*tid = pid_nr_ns(pid, ns);
 		task = get_pid_task(pid, PIDTYPE_PID);
 		if (!task) {
 			++*tid;
-- 
2.25.1

[PATCH AUTOSEL 5.8 60/63] libbpf: Fix map index used in error message

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 1e891e513e16c145cc9b45b1fdb8bf4a4f2f9557 ]

The error message emitted by bpf_object__init_user_btf_maps() was using the
wrong section ID.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200819110534.9058-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/bpf/libbpf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c
index e8e88c1ab69de..dd89cbc1acd7b 100644
--- a/tools/lib/bpf/libbpf.c
+++ b/tools/lib/bpf/libbpf.c
@@ -2237,7 +2237,7 @@ static int bpf_object__init_user_btf_maps(struct bpf_object *obj, bool strict,
 		data = elf_getdata(scn, NULL);
 	if (!scn || !data) {
 		pr_warn("failed to get Elf_Data from map section %d (%s)\n",
-			obj->efile.maps_shndx, MAPS_ELF_SEC);
+			obj->efile.btf_maps_shndx, MAPS_ELF_SEC);
 		return -EINVAL;
 	}
 
-- 
2.25.1

[PATCH AUTOSEL 5.8 61/63] bpf: selftests: global_funcs: Check err_str before strstr

[Sasha Levin]

From: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>

[ Upstream commit c210773d6c6f595f5922d56b7391fe343bc7310e ]

The error path in libbpf.c:load_program() has calls to pr_warn()
which ends up for global_funcs tests to
test_global_funcs.c:libbpf_debug_print().

For the tests with no struct test_def::err_str initialized with a
string, it causes call of strstr() with NULL as the second argument
and it segfaults.

Fix it by calling strstr() only for non-NULL err_str.

Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200820115843.39454-1-yauheni.kaliuta@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/bpf/prog_tests/test_global_funcs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c b/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c
index 25b068591e9a4..193002b14d7f6 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_global_funcs.c
@@ -19,7 +19,7 @@ static int libbpf_debug_print(enum libbpf_print_level level,
 	log_buf = va_arg(args, char *);
 	if (!log_buf)
 		goto out;
-	if (strstr(log_buf, err_str) == 0)
+	if (err_str && strstr(log_buf, err_str) == 0)
 		found = true;
 out:
 	printf(format, log_buf);
-- 
2.25.1