Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Alvin Šipraga" <alsi@bang-olufsen.dk>,
	"David S . Miller" <davem@davemloft.net>,
	"Sasha Levin" <sashal@kernel.org>,
	netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 5.7 44/54] macvlan: validate setting of multiple remote source MAC addresses
Date: Mon, 24 Aug 2020 12:36:23 -0400	[thread overview]
Message-ID: <20200824163634.606093-44-sashal@kernel.org> (raw)
In-Reply-To: <20200824163634.606093-1-sashal@kernel.org>

From: Alvin Šipraga <alsi@bang-olufsen.dk>

[ Upstream commit 8b61fba503904acae24aeb2bd5569b4d6544d48f ]

Remote source MAC addresses can be set on a 'source mode' macvlan
interface via the IFLA_MACVLAN_MACADDR_DATA attribute. This commit
tightens the validation of these MAC addresses to match the validation
already performed when setting or adding a single MAC address via the
IFLA_MACVLAN_MACADDR attribute.

iproute2 uses IFLA_MACVLAN_MACADDR_DATA for its 'macvlan macaddr set'
command, and IFLA_MACVLAN_MACADDR for its 'macvlan macaddr add' command,
which demonstrates the inconsistent behaviour that this commit
addresses:

 # ip link add link eth0 name macvlan0 type macvlan mode source
 # ip link set link dev macvlan0 type macvlan macaddr add 01:00:00:00:00:00
 RTNETLINK answers: Cannot assign requested address
 # ip link set link dev macvlan0 type macvlan macaddr set 01:00:00:00:00:00
 # ip -d link show macvlan0
 5: macvlan0@eth0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500 ...
     link/ether 2e:ac:fd:2d:69:f8 brd ff:ff:ff:ff:ff:ff promiscuity 0
     macvlan mode source remotes (1) 01:00:00:00:00:00 numtxqueues 1 ...

With this change, the 'set' command will (rightly) fail in the same way
as the 'add' command.

Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/macvlan.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index e900ebb94499d..b0c34906cad47 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -1259,6 +1259,9 @@ static void macvlan_port_destroy(struct net_device *dev)
 static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[],
 			    struct netlink_ext_ack *extack)
 {
+	struct nlattr *nla, *head;
+	int rem, len;
+
 	if (tb[IFLA_ADDRESS]) {
 		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
 			return -EINVAL;
@@ -1306,6 +1309,20 @@ static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[],
 			return -EADDRNOTAVAIL;
 	}
 
+	if (data[IFLA_MACVLAN_MACADDR_DATA]) {
+		head = nla_data(data[IFLA_MACVLAN_MACADDR_DATA]);
+		len = nla_len(data[IFLA_MACVLAN_MACADDR_DATA]);
+
+		nla_for_each_attr(nla, head, len, rem) {
+			if (nla_type(nla) != IFLA_MACVLAN_MACADDR ||
+			    nla_len(nla) != ETH_ALEN)
+				return -EINVAL;
+
+			if (!is_valid_ether_addr(nla_data(nla)))
+				return -EADDRNOTAVAIL;
+		}
+	}
+
 	if (data[IFLA_MACVLAN_MACADDR_COUNT])
 		return -EINVAL;
 
@@ -1362,10 +1379,6 @@ static int macvlan_changelink_sources(struct macvlan_dev *vlan, u32 mode,
 		len = nla_len(data[IFLA_MACVLAN_MACADDR_DATA]);
 
 		nla_for_each_attr(nla, head, len, rem) {
-			if (nla_type(nla) != IFLA_MACVLAN_MACADDR ||
-			    nla_len(nla) != ETH_ALEN)
-				continue;
-
 			addr = nla_data(nla);
 			ret = macvlan_hash_add_source(vlan, addr);
 			if (ret)
-- 
2.25.1


  parent reply	other threads:[~2020-08-24 17:09 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200824163634.606093-1-sashal@kernel.org>
2020-08-24 16:35 ` [PATCH AUTOSEL 5.7 20/54] selftests/bpf: Fix segmentation fault in test_progs Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 21/54] libbpf: Handle GCC built-in types for Arm NEON Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 22/54] netfilter: avoid ipv6 -> nf_defrag_ipv6 module dependency Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 23/54] libbpf: Prevent overriding errno when logging errors Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 24/54] selftests/bpf: Fix btf_dump test cases on 32-bit arches Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 25/54] selftests/bpf: Correct various core_reloc 64-bit assumptions Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 26/54] can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect corruptions Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 27/54] drivers/net/wan/hdlc_x25: Added needed_headroom and a skb->len check Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 32/54] selftests: disable rp_filter for icmp_redirect.sh Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 33/54] scsi: fcoe: Fix I/O path allocation Sasha Levin
2020-08-24 16:36 ` Sasha Levin [this message]
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 45/54] net: gianfar: Add of_node_put() before goto statement Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 51/54] libbpf: Fix map index used in error message Sasha Levin
2020-08-24 16:36 ` [PATCH AUTOSEL 5.7 52/54] bpf: selftests: global_funcs: Check err_str before strstr Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200824163634.606093-44-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=alsi@bang-olufsen.dk \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --subject='Re: [PATCH AUTOSEL 5.7 44/54] macvlan: validate setting of multiple remote source MAC addresses' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).