[PATCH AUTOSEL 4.14 05/45] net: pch_gbe: Use proper accessors to BE data in pch_ptp_match()

[PATCH AUTOSEL 4.14 05/45] net: pch_gbe: Use proper accessors to BE data in pch_ptp_match()

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 443ef39b499cc9c6635f83238101f1bb923e9326 ]

Sparse is not happy about handling of strict types in pch_ptp_match():

  .../pch_gbe_main.c:158:33: warning: incorrect type in argument 2 (different base types)
  .../pch_gbe_main.c:158:33:    expected unsigned short [usertype] uid_hi
  .../pch_gbe_main.c:158:33:    got restricted __be16 [usertype]
  .../pch_gbe_main.c:158:45: warning: incorrect type in argument 3 (different base types)
  .../pch_gbe_main.c:158:45:    expected unsigned int [usertype] uid_lo
  .../pch_gbe_main.c:158:45:    got restricted __be32 [usertype]
  .../pch_gbe_main.c:158:56: warning: incorrect type in argument 4 (different base types)
  .../pch_gbe_main.c:158:56:    expected unsigned short [usertype] seqid
  .../pch_gbe_main.c:158:56:    got restricted __be16 [usertype]

Fix that by switching to use proper accessors to BE data.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/oki-semi/pch_gbe/pch_gbe_main.c  | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 5ae9681a2da7..d06b666c58fc 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -124,7 +124,7 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)
 {
 	u8 *data = skb->data;
 	unsigned int offset;
-	u16 *hi, *id;
+	u16 hi, id;
 	u32 lo;
 
 	if (ptp_classify_raw(skb) == PTP_CLASS_NONE)
@@ -135,14 +135,11 @@ static int pch_ptp_match(struct sk_buff *skb, u16 uid_hi, u32 uid_lo, u16 seqid)
 	if (skb->len < offset + OFF_PTP_SEQUENCE_ID + sizeof(seqid))
 		return 0;
 
-	hi = (u16 *)(data + offset + OFF_PTP_SOURCE_UUID);
-	id = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID);
+	hi = get_unaligned_be16(data + offset + OFF_PTP_SOURCE_UUID + 0);
+	lo = get_unaligned_be32(data + offset + OFF_PTP_SOURCE_UUID + 2);
+	id = get_unaligned_be16(data + offset + OFF_PTP_SEQUENCE_ID);
 
-	memcpy(&lo, &hi[1], sizeof(lo));
-
-	return (uid_hi == *hi &&
-		uid_lo == lo &&
-		seqid  == *id);
+	return (uid_hi == hi && uid_lo == lo && seqid == id);
 }
 
 static void
@@ -152,7 +149,6 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb)
 	struct pci_dev *pdev;
 	u64 ns;
 	u32 hi, lo, val;
-	u16 uid, seq;
 
 	if (!adapter->hwts_rx_en)
 		return;
@@ -168,10 +164,7 @@ pch_rx_timestamp(struct pch_gbe_adapter *adapter, struct sk_buff *skb)
 	lo = pch_src_uuid_lo_read(pdev);
 	hi = pch_src_uuid_hi_read(pdev);
 
-	uid = hi & 0xffff;
-	seq = (hi >> 16) & 0xffff;
-
-	if (!pch_ptp_match(skb, htons(uid), htonl(lo), htons(seq)))
+	if (!pch_ptp_match(skb, hi, lo, hi >> 16))
 		goto out;
 
 	ns = pch_rx_snap_read(pdev);
-- 
2.30.2

[PATCH AUTOSEL 4.14 07/45] atm: iphase: fix possible use-after-free in ia_module_exit()

[Sasha Levin]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit 1c72e6ab66b9598cac741ed397438a52065a8f1f ]

This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/iphase.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 2b29598791e8..16eb0266a59a 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -3301,7 +3301,7 @@ static void __exit ia_module_exit(void)
 {
 	pci_unregister_driver(&ia_driver);
 
-        del_timer(&ia_timer);
+	del_timer_sync(&ia_timer);
 }
 
 module_init(ia_module_init);
-- 
2.30.2

[PATCH AUTOSEL 4.14 08/45] mISDN: fix possible use-after-free in HFC_cleanup()

[Sasha Levin]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit 009fc857c5f6fda81f2f7dd851b2d54193a8e733 ]

This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/isdn/hardware/mISDN/hfcpci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index d2e401a8090e..3e73cb5b8304 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -2349,7 +2349,7 @@ static void __exit
 HFC_cleanup(void)
 {
 	if (timer_pending(&hfc_tl))
-		del_timer(&hfc_tl);
+		del_timer_sync(&hfc_tl);
 
 	pci_unregister_driver(&hfc_driver);
 }
-- 
2.30.2

[PATCH AUTOSEL 4.14 09/45] atm: nicstar: Fix possible use-after-free in nicstar_cleanup()

[Sasha Levin]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit 34e7434ba4e97f4b85c1423a59b2922ba7dff2ea ]

This module's remove path calls del_timer(). However, that function
does not wait until the timer handler finishes. This means that the
timer handler may still be running after the driver's remove function
has finished, which would result in a use-after-free.

Fix by calling del_timer_sync(), which makes sure the timer handler
has finished, and unable to re-schedule itself.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/nicstar.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 7b2c5019bfcd..2c1a81b85816 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -298,7 +298,7 @@ static void __exit nicstar_cleanup(void)
 {
 	XPRINTK("nicstar: nicstar_cleanup() called.\n");
 
-	del_timer(&ns_timer);
+	del_timer_sync(&ns_timer);
 
 	pci_unregister_driver(&nicstar_driver);
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 10/45] net: Treat __napi_schedule_irqoff() as __napi_schedule() on PREEMPT_RT

[Sasha Levin]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit 8380c81d5c4fced6f4397795a5ae65758272bbfd ]

__napi_schedule_irqoff() is an optimized version of __napi_schedule()
which can be used where it is known that interrupts are disabled,
e.g. in interrupt-handlers, spin_lock_irq() sections or hrtimer
callbacks.

On PREEMPT_RT enabled kernels this assumptions is not true. Force-
threaded interrupt handlers and spinlocks are not disabling interrupts
and the NAPI hrtimer callback is forced into softirq context which runs
with interrupts enabled as well.

Chasing all usage sites of __napi_schedule_irqoff() is a whack-a-mole
game so make __napi_schedule_irqoff() invoke __napi_schedule() for
PREEMPT_RT kernels.

The callers of ____napi_schedule() in the networking core have been
audited and are correct on PREEMPT_RT kernels as well.

Reported-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/dev.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 7ee89125cd53..aa419f3162b8 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5277,11 +5277,18 @@ EXPORT_SYMBOL(napi_schedule_prep);
  * __napi_schedule_irqoff - schedule for receive
  * @n: entry to schedule
  *
- * Variant of __napi_schedule() assuming hard irqs are masked
+ * Variant of __napi_schedule() assuming hard irqs are masked.
+ *
+ * On PREEMPT_RT enabled kernels this maps to __napi_schedule()
+ * because the interrupt disabled assumption might not be true
+ * due to force-threaded interrupts and spinlock substitution.
  */
 void __napi_schedule_irqoff(struct napi_struct *n)
 {
-	____napi_schedule(this_cpu_ptr(&softnet_data), n);
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+		____napi_schedule(this_cpu_ptr(&softnet_data), n);
+	else
+		__napi_schedule(n);
 }
 EXPORT_SYMBOL(__napi_schedule_irqoff);
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 15/45] e100: handle eeprom as little endian

[Sasha Levin]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

[ Upstream commit d4ef55288aa2e1b76033717242728ac98ddc4721 ]

Sparse tool was warning on some implicit conversions from
little endian data read from the EEPROM on the e100 cards.

Fix these by being explicit about the conversions using
le16_to_cpu().

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e100.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 90974462743b..a73102357bbd 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -1423,7 +1423,7 @@ static int e100_phy_check_without_mii(struct nic *nic)
 	u8 phy_type;
 	int without_mii;
 
-	phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
+	phy_type = (le16_to_cpu(nic->eeprom[eeprom_phy_iface]) >> 8) & 0x0f;
 
 	switch (phy_type) {
 	case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
@@ -1543,7 +1543,7 @@ static int e100_phy_init(struct nic *nic)
 		mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
 	} else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
 	   (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
-		(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+	   (le16_to_cpu(nic->eeprom[eeprom_cnfg_mdix]) & eeprom_mdix_enabled))) {
 		/* enable/disable MDI/MDI-X auto-switching. */
 		mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
 				nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
@@ -2290,9 +2290,9 @@ static int e100_asf(struct nic *nic)
 {
 	/* ASF can be enabled from eeprom */
 	return (nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
-	   (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
-	   !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
-	   ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE);
+	   (le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_asf) &&
+	   !(le16_to_cpu(nic->eeprom[eeprom_config_asf]) & eeprom_gcl) &&
+	   ((le16_to_cpu(nic->eeprom[eeprom_smbus_addr]) & 0xFF) != 0xFE);
 }
 
 static int e100_up(struct nic *nic)
@@ -2948,7 +2948,7 @@ static int e100_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	/* Wol magic packet can be enabled from eeprom */
 	if ((nic->mac >= mac_82558_D101_A4) &&
-	   (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
+	   (le16_to_cpu(nic->eeprom[eeprom_id]) & eeprom_id_wol)) {
 		nic->flags |= wol_magic;
 		device_set_wakeup_enable(&pdev->dev, true);
 	}
-- 
2.30.2

[PATCH AUTOSEL 4.14 18/45] ipv6: use prandom_u32() for ID generation

[Sasha Levin]

From: Willy Tarreau <w@1wt.eu>

[ Upstream commit 62f20e068ccc50d6ab66fdb72ba90da2b9418c99 ]

This is a complement to commit aa6dd211e4b1 ("inet: use bigger hash
table for IP ID generation"), but focusing on some specific aspects
of IPv6.

Contary to IPv4, IPv6 only uses packet IDs with fragments, and with a
minimum MTU of 1280, it's much less easy to force a remote peer to
produce many fragments to explore its ID sequence. In addition packet
IDs are 32-bit in IPv6, which further complicates their analysis. On
the other hand, it is often easier to choose among plenty of possible
source addresses and partially work around the bigger hash table the
commit above permits, which leaves IPv6 partially exposed to some
possibilities of remote analysis at the risk of weakening some
protocols like DNS if some IDs can be predicted with a good enough
probability.

Given the wide range of permitted IDs, the risk of collision is extremely
low so there's no need to rely on the positive increment algorithm that
is shared with the IPv4 code via ip_idents_reserve(). We have a fast
PRNG, so let's simply call prandom_u32() and be done with it.

Performance measurements at 10 Gbps couldn't show any difference with
the previous code, even when using a single core, because due to the
large fragments, we're limited to only ~930 kpps at 10 Gbps and the cost
of the random generation is completely offset by other operations and by
the network transfer time. In addition, this change removes the need to
update a shared entry in the idents table so it may even end up being
slightly faster on large scale systems where this matters.

The risk of at least one collision here is about 1/80 million among
10 IDs, 1/850k among 100 IDs, and still only 1/8.5k among 1000 IDs,
which remains very low compared to IPv4 where all IDs are reused
every 4 to 80ms on a 10 Gbps flow depending on packet sizes.

Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210529110746.6796-1-w@1wt.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/output_core.c | 28 +++++-----------------------
 1 file changed, 5 insertions(+), 23 deletions(-)

diff --git a/net/ipv6/output_core.c b/net/ipv6/output_core.c
index 868ae23dbae1..3829b565c645 100644
--- a/net/ipv6/output_core.c
+++ b/net/ipv6/output_core.c
@@ -14,29 +14,11 @@ static u32 __ipv6_select_ident(struct net *net,
 			       const struct in6_addr *dst,
 			       const struct in6_addr *src)
 {
-	const struct {
-		struct in6_addr dst;
-		struct in6_addr src;
-	} __aligned(SIPHASH_ALIGNMENT) combined = {
-		.dst = *dst,
-		.src = *src,
-	};
-	u32 hash, id;
-
-	/* Note the following code is not safe, but this is okay. */
-	if (unlikely(siphash_key_is_zero(&net->ipv4.ip_id_key)))
-		get_random_bytes(&net->ipv4.ip_id_key,
-				 sizeof(net->ipv4.ip_id_key));
-
-	hash = siphash(&combined, sizeof(combined), &net->ipv4.ip_id_key);
-
-	/* Treat id of 0 as unset and if we get 0 back from ip_idents_reserve,
-	 * set the hight order instead thus minimizing possible future
-	 * collisions.
-	 */
-	id = ip_idents_reserve(hash, 1);
-	if (unlikely(!id))
-		id = 1 << 31;
+	u32 id;
+
+	do {
+		id = prandom_u32();
+	} while (!id);
 
 	return id;
 }
-- 
2.30.2

[PATCH AUTOSEL 4.14 21/45] virtio_net: Remove BUG() to avoid machine dead

[Sasha Levin]

From: Xianting Tian <xianting.tian@linux.alibaba.com>

[ Upstream commit 85eb1389458d134bdb75dad502cc026c3753a619 ]

We should not directly BUG() when there is hdr error, it is
better to output a print when such error happens. Currently,
the caller of xmit_skb() already did it.

Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/virtio_net.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 2d2a307c0231..71052d17c9ae 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1262,7 +1262,7 @@ static int xmit_skb(struct send_queue *sq, struct sk_buff *skb)
 	if (virtio_net_hdr_from_skb(skb, &hdr->hdr,
 				    virtio_is_little_endian(vi->vdev), false,
 				    0))
-		BUG();
+		return -EPROTO;
 
 	if (vi->mergeable_rx_bufs)
 		hdr->num_buffers = 0;
-- 
2.30.2

[PATCH AUTOSEL 4.14 22/45] net: bcmgenet: check return value after calling platform_get_resource()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 74325bf0104573c6dfce42837139aeef3f34be76 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index fca9da1b1363..72fad2a63c62 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -414,6 +414,10 @@ static int bcmgenet_mii_register(struct bcmgenet_priv *priv)
 	int id, ret;
 
 	pres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!pres) {
+		dev_err(&pdev->dev, "Invalid resource\n");
+		return -EINVAL;
+	}
 	memset(&res, 0, sizeof(res));
 	memset(&ppd, 0, sizeof(ppd));
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 23/45] net: micrel: check return value after calling platform_get_resource()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 20f1932e2282c58cb5ac59517585206cf5b385ae ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/micrel/ks8842.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/ethernet/micrel/ks8842.c b/drivers/net/ethernet/micrel/ks8842.c
index e3d7c74d47bb..5282c5754ac1 100644
--- a/drivers/net/ethernet/micrel/ks8842.c
+++ b/drivers/net/ethernet/micrel/ks8842.c
@@ -1150,6 +1150,10 @@ static int ks8842_probe(struct platform_device *pdev)
 	unsigned i;
 
 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem) {
+		dev_err(&pdev->dev, "Invalid resource\n");
+		return -EINVAL;
+	}
 	if (!request_mem_region(iomem->start, resource_size(iomem), DRV_NAME))
 		goto err_mem_region;
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 24/45] net: moxa: Use devm_platform_get_and_ioremap_resource()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 35cba15a504bf4f585bb9d78f47b22b28a1a06b2 ]

Use devm_platform_get_and_ioremap_resource() to simplify
code and avoid a null-ptr-deref by checking 'res' in it.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/moxa/moxart_ether.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/moxa/moxart_ether.c b/drivers/net/ethernet/moxa/moxart_ether.c
index beb730ff5d42..794f1702e54c 100644
--- a/drivers/net/ethernet/moxa/moxart_ether.c
+++ b/drivers/net/ethernet/moxa/moxart_ether.c
@@ -477,14 +477,13 @@ static int moxart_mac_probe(struct platform_device *pdev)
 	priv = netdev_priv(ndev);
 	priv->ndev = ndev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ndev->base_addr = res->start;
-	priv->base = devm_ioremap_resource(p_dev, res);
+	priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(priv->base)) {
 		dev_err(p_dev, "devm_ioremap_resource failed\n");
 		ret = PTR_ERR(priv->base);
 		goto init_fail;
 	}
+	ndev->base_addr = res->start;
 
 	spin_lock_init(&priv->txlock);
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 25/45] fjes: check return value after calling platform_get_resource()

[Sasha Levin]

From: Yang Yingliang <yangyingliang@huawei.com>

[ Upstream commit f18c11812c949553d2b2481ecaa274dd51bed1e7 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/fjes/fjes_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/fjes/fjes_main.c b/drivers/net/fjes/fjes_main.c
index 314e3eac09b9..26d3051591da 100644
--- a/drivers/net/fjes/fjes_main.c
+++ b/drivers/net/fjes/fjes_main.c
@@ -1277,6 +1277,10 @@ static int fjes_probe(struct platform_device *plat_dev)
 	adapter->interrupt_watch_enable = false;
 
 	res = platform_get_resource(plat_dev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -EINVAL;
+		goto err_free_control_wq;
+	}
 	hw->hw_res.start = res->start;
 	hw->hw_res.size = resource_size(res);
 	hw->hw_res.irq = platform_get_irq(plat_dev, 0);
-- 
2.30.2

[PATCH AUTOSEL 4.14 27/45] xfrm: Fix error reporting in xfrm_state_construct.

[Sasha Levin]

From: Steffen Klassert <steffen.klassert@secunet.com>

[ Upstream commit 6fd06963fa74197103cdbb4b494763127b3f2f34 ]

When memory allocation for XFRMA_ENCAP or XFRMA_COADDR fails,
the error will not be reported because the -ENOMEM assignment
to the err variable is overwritten before. Fix this by moving
these two in front of the function so that memory allocation
failures will be reported.

Reported-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/xfrm/xfrm_user.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 86084086a472..321fd881c638 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -566,6 +566,20 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
 
 	copy_from_user_state(x, p);
 
+	if (attrs[XFRMA_ENCAP]) {
+		x->encap = kmemdup(nla_data(attrs[XFRMA_ENCAP]),
+				   sizeof(*x->encap), GFP_KERNEL);
+		if (x->encap == NULL)
+			goto error;
+	}
+
+	if (attrs[XFRMA_COADDR]) {
+		x->coaddr = kmemdup(nla_data(attrs[XFRMA_COADDR]),
+				    sizeof(*x->coaddr), GFP_KERNEL);
+		if (x->coaddr == NULL)
+			goto error;
+	}
+
 	if (attrs[XFRMA_SA_EXTRA_FLAGS])
 		x->props.extra_flags = nla_get_u32(attrs[XFRMA_SA_EXTRA_FLAGS]);
 
@@ -586,23 +600,9 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
 				   attrs[XFRMA_ALG_COMP])))
 		goto error;
 
-	if (attrs[XFRMA_ENCAP]) {
-		x->encap = kmemdup(nla_data(attrs[XFRMA_ENCAP]),
-				   sizeof(*x->encap), GFP_KERNEL);
-		if (x->encap == NULL)
-			goto error;
-	}
-
 	if (attrs[XFRMA_TFCPAD])
 		x->tfcpad = nla_get_u32(attrs[XFRMA_TFCPAD]);
 
-	if (attrs[XFRMA_COADDR]) {
-		x->coaddr = kmemdup(nla_data(attrs[XFRMA_COADDR]),
-				    sizeof(*x->coaddr), GFP_KERNEL);
-		if (x->coaddr == NULL)
-			goto error;
-	}
-
 	xfrm_mark_get(attrs, &x->mark);
 
 	if (attrs[XFRMA_OUTPUT_MARK])
-- 
2.30.2

[PATCH AUTOSEL 4.14 28/45] wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP

[Sasha Levin]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 11ef6bc846dcdce838f0b00c5f6a562c57e5d43b ]

At least on wl12xx, reading the MAC after boot can fail with a warning
at drivers/net/wireless/ti/wlcore/sdio.c:78 wl12xx_sdio_raw_read.
The failed call comes from wl12xx_get_mac() that wlcore_nvs_cb() calls
after request_firmware_work_func().

After the error, no wireless interface is created. Reloading the wl12xx
module makes the interface work.

Turns out the wlan controller can be in a low-power ELP state after the
boot from the bootloader or kexec, and needs to be woken up first.

Let's wake the hardware and add a sleep after that similar to
wl12xx_pre_boot() is already doing.

Note that a similar issue could exist for wl18xx, but I have not seen it
so far. And a search for wl18xx_get_mac and wl12xx_sdio_raw_read did not
produce similar errors.

Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210603062814.19464-1-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wl12xx/main.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c
index 9bd635ec7827..72991d3a55f1 100644
--- a/drivers/net/wireless/ti/wl12xx/main.c
+++ b/drivers/net/wireless/ti/wl12xx/main.c
@@ -1516,6 +1516,13 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl)
 	u32 mac1, mac2;
 	int ret;
 
+	/* Device may be in ELP from the bootloader or kexec */
+	ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+	if (ret < 0)
+		goto out;
+
+	usleep_range(500000, 700000);
+
 	ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
 	if (ret < 0)
 		goto out;
-- 
2.30.2

[PATCH AUTOSEL 4.14 29/45] wl1251: Fix possible buffer overflow in wl1251_cmd_scan

[Sasha Levin]

From: Lee Gibson <leegib@gmail.com>

[ Upstream commit d10a87a3535cce2b890897914f5d0d83df669c63 ]

Function wl1251_cmd_scan calls memcpy without checking the length.
Harden by checking the length is within the maximum allowed size.

Signed-off-by: Lee Gibson <leegib@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210428115508.25624-1-leegib@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ti/wl1251/cmd.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ti/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c
index 9547aea01b0f..ea0215246c5c 100644
--- a/drivers/net/wireless/ti/wl1251/cmd.c
+++ b/drivers/net/wireless/ti/wl1251/cmd.c
@@ -466,9 +466,12 @@ int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
 		cmd->channels[i].channel = channels[i]->hw_value;
 	}
 
-	cmd->params.ssid_len = ssid_len;
-	if (ssid)
-		memcpy(cmd->params.ssid, ssid, ssid_len);
+	if (ssid) {
+		int len = clamp_val(ssid_len, 0, IEEE80211_MAX_SSID_LEN);
+
+		cmd->params.ssid_len = len;
+		memcpy(cmd->params.ssid, ssid, len);
+	}
 
 	ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd));
 	if (ret < 0) {
-- 
2.30.2

[PATCH AUTOSEL 4.14 30/45] cw1200: add missing MODULE_DEVICE_TABLE

[Sasha Levin]

From: Zou Wei <zou_wei@huawei.com>

[ Upstream commit dd778f89225cd258e8f0fed2b7256124982c8bb5 ]

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1620788714-14300-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/st/cw1200/cw1200_sdio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/st/cw1200/cw1200_sdio.c b/drivers/net/wireless/st/cw1200/cw1200_sdio.c
index 1037ec62659d..ee86436bf152 100644
--- a/drivers/net/wireless/st/cw1200/cw1200_sdio.c
+++ b/drivers/net/wireless/st/cw1200/cw1200_sdio.c
@@ -63,6 +63,7 @@ static const struct sdio_device_id cw1200_sdio_ids[] = {
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200) },
 	{ /* end: all zeroes */			},
 };
+MODULE_DEVICE_TABLE(sdio, cw1200_sdio_ids);
 
 /* hwbus_ops implemetation */
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 32/45] atm: nicstar: use 'dma_free_coherent' instead of 'kfree'

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 6a1e5a4af17e440dd82a58a2c5f40ff17a82b722 ]

When 'nicstar_init_one' fails, 'ns_init_card_error' will be executed for
error handling, but the correct memory free function should be used,
otherwise it will cause an error. Since 'card->rsq.org' and
'card->tsq.org' are allocated using 'dma_alloc_coherent' function, they
should be freed using 'dma_free_coherent'.

Fix this by using 'dma_free_coherent' instead of 'kfree'

This log reveals it:

[    3.440294] kernel BUG at mm/slub.c:4206!
[    3.441059] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[    3.441430] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #141
[    3.441986] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.442780] RIP: 0010:kfree+0x26a/0x300
[    3.443065] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[    3.443396] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[    3.443396] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[    3.443396] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[    3.443396] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[    3.443396] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[    3.443396] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[    3.443396] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[    3.443396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.443396] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.443396] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.443396] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.443396] Call Trace:
[    3.443396]  ns_init_card_error+0x12c/0x220
[    3.443396]  nicstar_init_one+0x10d2/0x1130
[    3.443396]  local_pci_probe+0x4a/0xb0
[    3.443396]  pci_device_probe+0x126/0x1d0
[    3.443396]  ? pci_device_remove+0x100/0x100
[    3.443396]  really_probe+0x27e/0x650
[    3.443396]  driver_probe_device+0x84/0x1d0
[    3.443396]  ? mutex_lock_nested+0x16/0x20
[    3.443396]  device_driver_attach+0x63/0x70
[    3.443396]  __driver_attach+0x117/0x1a0
[    3.443396]  ? device_driver_attach+0x70/0x70
[    3.443396]  bus_for_each_dev+0xb6/0x110
[    3.443396]  ? rdinit_setup+0x40/0x40
[    3.443396]  driver_attach+0x22/0x30
[    3.443396]  bus_add_driver+0x1e6/0x2a0
[    3.443396]  driver_register+0xa4/0x180
[    3.443396]  __pci_register_driver+0x77/0x80
[    3.443396]  ? uPD98402_module_init+0xd/0xd
[    3.443396]  nicstar_init+0x1f/0x75
[    3.443396]  do_one_initcall+0x7a/0x3d0
[    3.443396]  ? rdinit_setup+0x40/0x40
[    3.443396]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.443396]  kernel_init_freeable+0x2a7/0x2f9
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  kernel_init+0x13/0x180
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  ? rest_init+0x2c0/0x2c0
[    3.443396]  ret_from_fork+0x1f/0x30
[    3.443396] Modules linked in:
[    3.443396] Dumping ftrace buffer:
[    3.443396]    (ftrace buffer empty)
[    3.458593] ---[ end trace 3c6f8f0d8ef59bcd ]---
[    3.458922] RIP: 0010:kfree+0x26a/0x300
[    3.459198] Code: e8 3a c3 b9 ff e9 d6 fd ff ff 49 8b 45 00 31 db a9 00 00 01 00 75 4d 49 8b 45 00 a9 00 00 01 00 75 0a 49 8b 45 08 a8 01 75 02 <0f> 0b 89 d9 b8 00 10 00 00 be 06 00 00 00 48 d3 e0 f7 d8 48 63 d0
[    3.460499] RSP: 0000:ffffc90000017b70 EFLAGS: 00010246
[    3.460870] RAX: dead000000000100 RBX: 0000000000000000 RCX: 0000000000000000
[    3.461371] RDX: 0000000000000000 RSI: ffffffff85d3df94 RDI: ffffffff85df38e6
[    3.461873] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000001
[    3.462372] R10: 0000000000000000 R11: 0000000000000001 R12: ffff888107dc0000
[    3.462871] R13: ffffea00001f0100 R14: ffff888101a8bf00 R15: ffff888107dc0160
[    3.463368] FS:  0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000
[    3.463949] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.464356] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.464856] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.465356] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.465860] Kernel panic - not syncing: Fatal exception
[    3.466370] Dumping ftrace buffer:
[    3.466616]    (ftrace buffer empty)
[    3.466871] Kernel Offset: disabled
[    3.467122] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/nicstar.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 2c1a81b85816..d62ec533087e 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -838,10 +838,12 @@ static void ns_init_card_error(ns_dev *card, int error)
 			dev_kfree_skb_any(hb);
 	}
 	if (error >= 12) {
-		kfree(card->rsq.org);
+		dma_free_coherent(&card->pcidev->dev, NS_RSQSIZE + NS_RSQ_ALIGNMENT,
+				card->rsq.org, card->rsq.dma);
 	}
 	if (error >= 11) {
-		kfree(card->tsq.org);
+		dma_free_coherent(&card->pcidev->dev, NS_TSQSIZE + NS_TSQ_ALIGNMENT,
+				card->tsq.org, card->tsq.dma);
 	}
 	if (error >= 10) {
 		free_irq(card->pcidev->irq, card);
-- 
2.30.2

[PATCH AUTOSEL 4.14 33/45] atm: nicstar: register the interrupt handler in the right place

[Sasha Levin]

From: Zheyu Ma <zheyuma97@gmail.com>

[ Upstream commit 70b639dc41ad499384e41e106fce72e36805c9f2 ]

Because the error handling is sequential, the application of resources
should be carried out in the order of error handling, so the operation
of registering the interrupt handler should be put in front, so as not
to free the unregistered interrupt handler during error handling.

This log reveals it:

[    3.438724] Trying to free already-free IRQ 23
[    3.439060] WARNING: CPU: 5 PID: 1 at kernel/irq/manage.c:1825 free_irq+0xfb/0x480
[    3.440039] Modules linked in:
[    3.440257] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[    3.440793] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.441561] RIP: 0010:free_irq+0xfb/0x480
[    3.441845] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[    3.443121] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[    3.443483] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[    3.443972] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[    3.444462] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[    3.444950] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[    3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[    3.444994] FS:  0000000000000000(0000) GS:ffff88817bd40000(0000) knlGS:0000000000000000
[    3.444994] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.444994] CR2: 0000000000000000 CR3: 000000000642e000 CR4: 00000000000006e0
[    3.444994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    3.444994] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    3.444994] Call Trace:
[    3.444994]  ns_init_card_error+0x18e/0x250
[    3.444994]  nicstar_init_one+0x10d2/0x1130
[    3.444994]  local_pci_probe+0x4a/0xb0
[    3.444994]  pci_device_probe+0x126/0x1d0
[    3.444994]  ? pci_device_remove+0x100/0x100
[    3.444994]  really_probe+0x27e/0x650
[    3.444994]  driver_probe_device+0x84/0x1d0
[    3.444994]  ? mutex_lock_nested+0x16/0x20
[    3.444994]  device_driver_attach+0x63/0x70
[    3.444994]  __driver_attach+0x117/0x1a0
[    3.444994]  ? device_driver_attach+0x70/0x70
[    3.444994]  bus_for_each_dev+0xb6/0x110
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  driver_attach+0x22/0x30
[    3.444994]  bus_add_driver+0x1e6/0x2a0
[    3.444994]  driver_register+0xa4/0x180
[    3.444994]  __pci_register_driver+0x77/0x80
[    3.444994]  ? uPD98402_module_init+0xd/0xd
[    3.444994]  nicstar_init+0x1f/0x75
[    3.444994]  do_one_initcall+0x7a/0x3d0
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.444994]  kernel_init_freeable+0x2a7/0x2f9
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  kernel_init+0x13/0x180
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ret_from_fork+0x1f/0x30
[    3.444994] Kernel panic - not syncing: panic_on_warn set ...
[    3.444994] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.12.4-g70e7f0549188-dirty #142
[    3.444994] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[    3.444994] Call Trace:
[    3.444994]  dump_stack+0xba/0xf5
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  panic+0x155/0x3ed
[    3.444994]  ? __warn+0xed/0x150
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  __warn+0x103/0x150
[    3.444994]  ? free_irq+0xfb/0x480
[    3.444994]  report_bug+0x119/0x1c0
[    3.444994]  handle_bug+0x3b/0x80
[    3.444994]  exc_invalid_op+0x18/0x70
[    3.444994]  asm_exc_invalid_op+0x12/0x20
[    3.444994] RIP: 0010:free_irq+0xfb/0x480
[    3.444994] Code: 6e 08 74 6f 4d 89 f4 e8 c3 78 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 b4 78 09 00 8b 75 c8 48 c7 c7 a0 ac d5 85 e8 95 d7 f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 87 c5 90 03 48 8b 43 40 4c 8b a0 80
[    3.444994] RSP: 0000:ffffc90000017b50 EFLAGS: 00010086
[    3.444994] RAX: 0000000000000000 RBX: ffff888107c6f000 RCX: 0000000000000000
[    3.444994] RDX: 0000000000000000 RSI: ffffffff8123f301 RDI: 00000000ffffffff
[    3.444994] RBP: ffffc90000017b90 R08: 0000000000000001 R09: 0000000000000003
[    3.444994] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
[    3.444994] R13: ffff888107dc0000 R14: ffff888104f6bf00 R15: ffff888107c6f0a8
[    3.444994]  ? vprintk_func+0x71/0x110
[    3.444994]  ns_init_card_error+0x18e/0x250
[    3.444994]  nicstar_init_one+0x10d2/0x1130
[    3.444994]  local_pci_probe+0x4a/0xb0
[    3.444994]  pci_device_probe+0x126/0x1d0
[    3.444994]  ? pci_device_remove+0x100/0x100
[    3.444994]  really_probe+0x27e/0x650
[    3.444994]  driver_probe_device+0x84/0x1d0
[    3.444994]  ? mutex_lock_nested+0x16/0x20
[    3.444994]  device_driver_attach+0x63/0x70
[    3.444994]  __driver_attach+0x117/0x1a0
[    3.444994]  ? device_driver_attach+0x70/0x70
[    3.444994]  bus_for_each_dev+0xb6/0x110
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  driver_attach+0x22/0x30
[    3.444994]  bus_add_driver+0x1e6/0x2a0
[    3.444994]  driver_register+0xa4/0x180
[    3.444994]  __pci_register_driver+0x77/0x80
[    3.444994]  ? uPD98402_module_init+0xd/0xd
[    3.444994]  nicstar_init+0x1f/0x75
[    3.444994]  do_one_initcall+0x7a/0x3d0
[    3.444994]  ? rdinit_setup+0x40/0x40
[    3.444994]  ? rcu_read_lock_sched_held+0x4a/0x70
[    3.444994]  kernel_init_freeable+0x2a7/0x2f9
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  kernel_init+0x13/0x180
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ? rest_init+0x2c0/0x2c0
[    3.444994]  ret_from_fork+0x1f/0x30
[    3.444994] Dumping ftrace buffer:
[    3.444994]    (ftrace buffer empty)
[    3.444994] Kernel Offset: disabled
[    3.444994] Rebooting in 1 seconds..

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/nicstar.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index d62ec533087e..52b735e23ba9 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -526,6 +526,15 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
 	/* Set the VPI/VCI MSb mask to zero so we can receive OAM cells */
 	writel(0x00000000, card->membase + VPM);
 
+	card->intcnt = 0;
+	if (request_irq
+	    (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) {
+		pr_err("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq);
+		error = 9;
+		ns_init_card_error(card, error);
+		return error;
+	}
+
 	/* Initialize TSQ */
 	card->tsq.org = dma_alloc_coherent(&card->pcidev->dev,
 					   NS_TSQSIZE + NS_TSQ_ALIGNMENT,
@@ -752,15 +761,6 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
 
 	card->efbie = 1;
 
-	card->intcnt = 0;
-	if (request_irq
-	    (pcidev->irq, &ns_irq_handler, IRQF_SHARED, "nicstar", card) != 0) {
-		printk("nicstar%d: can't allocate IRQ %d.\n", i, pcidev->irq);
-		error = 9;
-		ns_init_card_error(card, error);
-		return error;
-	}
-
 	/* Register device */
 	card->atmdev = atm_dev_register("nicstar", &card->pcidev->dev, &atm_ops,
 					-1, NULL);
-- 
2.30.2

[PATCH AUTOSEL 4.14 34/45] vsock: notify server to shutdown when client has pending signal

[Sasha Levin]

From: "Longpeng(Mike)" <longpeng2@huawei.com>

[ Upstream commit c7ff9cff70601ea19245d997bb977344663434c7 ]

The client's sk_state will be set to TCP_ESTABLISHED if the server
replay the client's connect request.

However, if the client has pending signal, its sk_state will be set
to TCP_CLOSE without notify the server, so the server will hold the
corrupt connection.

            client                        server

1. sk_state=TCP_SYN_SENT         |
2. call ->connect()              |
3. wait reply                    |
                                 | 4. sk_state=TCP_ESTABLISHED
                                 | 5. insert to connected list
                                 | 6. reply to the client
7. sk_state=TCP_ESTABLISHED      |
8. insert to connected list      |
9. *signal pending* <--------------------- the user kill client
10. sk_state=TCP_CLOSE           |
client is exiting...             |
11. call ->release()             |
     virtio_transport_close
      if (!(sk->sk_state == TCP_ESTABLISHED ||
	      sk->sk_state == TCP_CLOSING))
		return true; *return at here, the server cannot notice the connection is corrupt*

So the client should notify the peer in this case.

Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Norbert Slusarek <nslusarek@gmx.net>
Cc: Andra Paraschiv <andraprs@amazon.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Brazdil <dbrazdil@google.com>
Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lkml.org/lkml/2021/5/17/418
Signed-off-by: lixianming <lixianming5@huawei.com>
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/vmw_vsock/af_vsock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c
index ae85a5e5648b..02a171916dd2 100644
--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -1232,7 +1232,7 @@ static int vsock_stream_connect(struct socket *sock, struct sockaddr *addr,
 
 		if (signal_pending(current)) {
 			err = sock_intr_errno(timeout);
-			sk->sk_state = TCP_CLOSE;
+			sk->sk_state = sk->sk_state == TCP_ESTABLISHED ? TCP_CLOSING : TCP_CLOSE;
 			sock->state = SS_UNCONNECTED;
 			vsock_transport_cancel_pkt(vsk);
 			goto out_wait;
-- 
2.30.2

[PATCH AUTOSEL 4.14 36/45] iwlwifi: mvm: don't change band on bound PHY contexts

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 8835a64f74c46baebfc946cd5a2c861b866ebcee ]

When we have a P2P Device active, we attempt to only change the
PHY context it uses when we get a new remain-on-channel, if the
P2P Device is the only user of the PHY context.

This is fine if we're switching within a band, but if we're
switching bands then the switch implies a removal and re-add
of the PHY context, which isn't permitted by the firmware while
it's bound to an interface.

Fix the code to skip the unbind/release/... cycle only if the
band doesn't change (or we have old devices that can switch the
band on the fly as well.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210612142637.e9ac313f70f3.I713b9d109957df7e7d9ed0861d5377ce3f8fccd3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/mvm/mac80211.c | 24 ++++++++++++++-----
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 9aab9a026954..d82d8cfe2e41 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -3270,6 +3270,7 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw,
 	struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
 	struct cfg80211_chan_def chandef;
 	struct iwl_mvm_phy_ctxt *phy_ctxt;
+	bool band_change_removal;
 	int ret, i;
 
 	IWL_DEBUG_MAC80211(mvm, "enter (%d, %d, %d)\n", channel->hw_value,
@@ -3335,19 +3336,30 @@ static int iwl_mvm_roc(struct ieee80211_hw *hw,
 	cfg80211_chandef_create(&chandef, channel, NL80211_CHAN_NO_HT);
 
 	/*
-	 * Change the PHY context configuration as it is currently referenced
-	 * only by the P2P Device MAC
+	 * Check if the remain-on-channel is on a different band and that
+	 * requires context removal, see iwl_mvm_phy_ctxt_changed(). If
+	 * so, we'll need to release and then re-configure here, since we
+	 * must not remove a PHY context that's part of a binding.
 	 */
-	if (mvmvif->phy_ctxt->ref == 1) {
+	band_change_removal =
+		fw_has_capa(&mvm->fw->ucode_capa,
+			    IWL_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT) &&
+		mvmvif->phy_ctxt->channel->band != chandef.chan->band;
+
+	if (mvmvif->phy_ctxt->ref == 1 && !band_change_removal) {
+		/*
+		 * Change the PHY context configuration as it is currently
+		 * referenced only by the P2P Device MAC (and we can modify it)
+		 */
 		ret = iwl_mvm_phy_ctxt_changed(mvm, mvmvif->phy_ctxt,
 					       &chandef, 1, 1);
 		if (ret)
 			goto out_unlock;
 	} else {
 		/*
-		 * The PHY context is shared with other MACs. Need to remove the
-		 * P2P Device from the binding, allocate an new PHY context and
-		 * create a new binding
+		 * The PHY context is shared with other MACs (or we're trying to
+		 * switch bands), so remove the P2P Device from the binding,
+		 * allocate an new PHY context and create a new binding.
 		 */
 		phy_ctxt = iwl_mvm_get_free_phy_ctxt(mvm);
 		if (!phy_ctxt) {
-- 
2.30.2

[PATCH AUTOSEL 4.14 37/45] sfc: avoid double pci_remove of VFs

[Sasha Levin]

From: Íñigo Huguet <ihuguet@redhat.com>

[ Upstream commit 45423cff1db66cf0993e8a9bd0ac93e740149e49 ]

If pci_remove was called for a PF with VFs, the removal of the VFs was
called twice from efx_ef10_sriov_fini: one directly with pci_driver->remove
and another implicit by calling pci_disable_sriov, which also perform
the VFs remove. This was leading to crashing the kernel on the second
attempt.

Given that pci_disable_sriov already calls to pci remove function, get
rid of the direct call to pci_driver->remove from the driver.

2 different ways to trigger the bug:
- Create one or more VFs, then attach the PF to a virtual machine (at
  least with qemu/KVM)
- Create one or more VFs, then remove the PF with:
  echo 1 > /sys/bus/pci/devices/PF_PCI_ID/remove

Removing sfc module does not trigger the error, at least for me, because
it removes the VF first, and then the PF.

Example of a log with the error:
    list_del corruption, ffff967fd20a8ad0->next is LIST_POISON1 (dead000000000100)
    ------------[ cut here ]------------
    kernel BUG at lib/list_debug.c:47!
    [...trimmed...]
    RIP: 0010:__list_del_entry_valid.cold.1+0x12/0x4c
    [...trimmed...]
    Call Trace:
    efx_dissociate+0x1f/0x140 [sfc]
    efx_pci_remove+0x27/0x150 [sfc]
    pci_device_remove+0x3b/0xc0
    device_release_driver_internal+0x103/0x1f0
    pci_stop_bus_device+0x69/0x90
    pci_stop_and_remove_bus_device+0xe/0x20
    pci_iov_remove_virtfn+0xba/0x120
    sriov_disable+0x2f/0xe0
    efx_ef10_pci_sriov_disable+0x52/0x80 [sfc]
    ? pcie_aer_is_native+0x12/0x40
    efx_ef10_sriov_fini+0x72/0x110 [sfc]
    efx_pci_remove+0x62/0x150 [sfc]
    pci_device_remove+0x3b/0xc0
    device_release_driver_internal+0x103/0x1f0
    unbind_store+0xf6/0x130
    kernfs_fop_write+0x116/0x190
    vfs_write+0xa5/0x1a0
    ksys_write+0x4f/0xb0
    do_syscall_64+0x5b/0x1a0
    entry_SYSCALL_64_after_hwframe+0x65/0xca

Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ef10_sriov.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/sfc/ef10_sriov.c b/drivers/net/ethernet/sfc/ef10_sriov.c
index 019cef1d3cf7..76c8d50882fc 100644
--- a/drivers/net/ethernet/sfc/ef10_sriov.c
+++ b/drivers/net/ethernet/sfc/ef10_sriov.c
@@ -443,7 +443,6 @@ int efx_ef10_sriov_init(struct efx_nic *efx)
 void efx_ef10_sriov_fini(struct efx_nic *efx)
 {
 	struct efx_ef10_nic_data *nic_data = efx->nic_data;
-	unsigned int i;
 	int rc;
 
 	if (!nic_data->vf) {
@@ -453,14 +452,7 @@ void efx_ef10_sriov_fini(struct efx_nic *efx)
 		return;
 	}
 
-	/* Remove any VFs in the host */
-	for (i = 0; i < efx->vf_count; ++i) {
-		struct efx_nic *vf_efx = nic_data->vf[i].efx;
-
-		if (vf_efx)
-			vf_efx->pci_dev->driver->remove(vf_efx->pci_dev);
-	}
-
+	/* Disable SRIOV and remove any VFs in the host */
 	rc = efx_ef10_pci_sriov_disable(efx, true);
 	if (rc)
 		netif_dbg(efx, drv, efx->net_dev,
-- 
2.30.2

[PATCH AUTOSEL 4.14 38/45] sfc: error code if SRIOV cannot be disabled

[Sasha Levin]

From: Íñigo Huguet <ihuguet@redhat.com>

[ Upstream commit 1ebe4feb8b442884f5a28d2437040096723dd1ea ]

If SRIOV cannot be disabled during device removal or module unloading,
return error code so it can be logged properly in the calling function.

Note that this can only happen if any VF is currently attached to a
guest using Xen, but not with vfio/KVM. Despite that in that case the
VFs won't work properly with PF removed and/or the module unloaded, I
have let it as is because I don't know what side effects may have
changing it, and also it seems to be the same that other drivers are
doing in this situation.

In the case of being called during SRIOV reconfiguration, the behavior
hasn't changed because the function is called with force=false.

Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/sfc/ef10_sriov.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/sfc/ef10_sriov.c b/drivers/net/ethernet/sfc/ef10_sriov.c
index 76c8d50882fc..2f36b18fd109 100644
--- a/drivers/net/ethernet/sfc/ef10_sriov.c
+++ b/drivers/net/ethernet/sfc/ef10_sriov.c
@@ -406,12 +406,17 @@ static int efx_ef10_pci_sriov_enable(struct efx_nic *efx, int num_vfs)
 	return rc;
 }
 
+/* Disable SRIOV and remove VFs
+ * If some VFs are attached to a guest (using Xen, only) nothing is
+ * done if force=false, and vports are freed if force=true (for the non
+ * attachedc ones, only) but SRIOV is not disabled and VFs are not
+ * removed in either case.
+ */
 static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
 {
 	struct pci_dev *dev = efx->pci_dev;
-	unsigned int vfs_assigned = 0;
-
-	vfs_assigned = pci_vfs_assigned(dev);
+	unsigned int vfs_assigned = pci_vfs_assigned(dev);
+	int rc = 0;
 
 	if (vfs_assigned && !force) {
 		netif_info(efx, drv, efx->net_dev, "VFs are assigned to guests; "
@@ -421,10 +426,12 @@ static int efx_ef10_pci_sriov_disable(struct efx_nic *efx, bool force)
 
 	if (!vfs_assigned)
 		pci_disable_sriov(dev);
+	else
+		rc = -EBUSY;
 
 	efx_ef10_sriov_free_vf_vswitching(efx);
 	efx->vf_count = 0;
-	return 0;
+	return rc;
 }
 
 int efx_ef10_sriov_configure(struct efx_nic *efx, int num_vfs)
-- 
2.30.2

[PATCH AUTOSEL 4.14 39/45] wireless: wext-spy: Fix out-of-bounds warning

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit e93bdd78406da9ed01554c51e38b2a02c8ef8025 ]

Fix the following out-of-bounds warning:

net/wireless/wext-spy.c:178:2: warning: 'memcpy' offset [25, 28] from the object at 'threshold' is out of the bounds of referenced subobject 'low' with type 'struct iw_quality' at offset 20 [-Warray-bounds]

The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &threshold.low and &spydata->spy_thr_low. As
these are just a couple of struct members, fix this by using direct
assignments, instead of memcpy().

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422200032.GA168995@embeddedor
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/wext-spy.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/net/wireless/wext-spy.c b/net/wireless/wext-spy.c
index 33bef22e44e9..b379a0371653 100644
--- a/net/wireless/wext-spy.c
+++ b/net/wireless/wext-spy.c
@@ -120,8 +120,8 @@ int iw_handler_set_thrspy(struct net_device *	dev,
 		return -EOPNOTSUPP;
 
 	/* Just do it */
-	memcpy(&(spydata->spy_thr_low), &(threshold->low),
-	       2 * sizeof(struct iw_quality));
+	spydata->spy_thr_low = threshold->low;
+	spydata->spy_thr_high = threshold->high;
 
 	/* Clear flag */
 	memset(spydata->spy_thr_under, '\0', sizeof(spydata->spy_thr_under));
@@ -147,8 +147,8 @@ int iw_handler_get_thrspy(struct net_device *	dev,
 		return -EOPNOTSUPP;
 
 	/* Just do it */
-	memcpy(&(threshold->low), &(spydata->spy_thr_low),
-	       2 * sizeof(struct iw_quality));
+	threshold->low = spydata->spy_thr_low;
+	threshold->high = spydata->spy_thr_high;
 
 	return 0;
 }
@@ -173,10 +173,10 @@ static void iw_send_thrspy_event(struct net_device *	dev,
 	memcpy(threshold.addr.sa_data, address, ETH_ALEN);
 	threshold.addr.sa_family = ARPHRD_ETHER;
 	/* Copy stats */
-	memcpy(&(threshold.qual), wstats, sizeof(struct iw_quality));
+	threshold.qual = *wstats;
 	/* Copy also thresholds */
-	memcpy(&(threshold.low), &(spydata->spy_thr_low),
-	       2 * sizeof(struct iw_quality));
+	threshold.low = spydata->spy_thr_low;
+	threshold.high = spydata->spy_thr_high;
 
 	/* Send event to user space */
 	wireless_send_event(dev, SIOCGIWTHRSPY, &wrqu, (char *) &threshold);
-- 
2.30.2

[PATCH AUTOSEL 4.14 41/45] Bluetooth: Fix the HCI to MGMT status conversion table

[Sasha Levin]

From: Yu Liu <yudiliu@google.com>

[ Upstream commit 4ef36a52b0e47c80bbfd69c0cce61c7ae9f541ed ]

0x2B, 0x31 and 0x33 are reserved for future use but were not present in
the HCI to MGMT conversion table, this caused the conversion to be
incorrect for the HCI status code greater than 0x2A.

Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Yu Liu <yudiliu@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/mgmt.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index bca1408f815f..be634b97b857 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -219,12 +219,15 @@ static u8 mgmt_status_table[] = {
 	MGMT_STATUS_TIMEOUT,		/* Instant Passed */
 	MGMT_STATUS_NOT_SUPPORTED,	/* Pairing Not Supported */
 	MGMT_STATUS_FAILED,		/* Transaction Collision */
+	MGMT_STATUS_FAILED,		/* Reserved for future use */
 	MGMT_STATUS_INVALID_PARAMS,	/* Unacceptable Parameter */
 	MGMT_STATUS_REJECTED,		/* QoS Rejected */
 	MGMT_STATUS_NOT_SUPPORTED,	/* Classification Not Supported */
 	MGMT_STATUS_REJECTED,		/* Insufficient Security */
 	MGMT_STATUS_INVALID_PARAMS,	/* Parameter Out Of Range */
+	MGMT_STATUS_FAILED,		/* Reserved for future use */
 	MGMT_STATUS_BUSY,		/* Role Switch Pending */
+	MGMT_STATUS_FAILED,		/* Reserved for future use */
 	MGMT_STATUS_FAILED,		/* Slot Violation */
 	MGMT_STATUS_FAILED,		/* Role Switch Failed */
 	MGMT_STATUS_INVALID_PARAMS,	/* EIR Too Large */
-- 
2.30.2

[PATCH AUTOSEL 4.14 42/45] Bluetooth: Shutdown controller after workqueues are flushed or cancelled

[Sasha Levin]

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 0ea9fd001a14ebc294f112b0361a4e601551d508 ]

Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it
stops working:
[  509.691509] Bluetooth: hci0: HCI reset during shutdown failed
[  514.897584] Bluetooth: hci0: MSFT filter_enable is already on
[  530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[  545.660350] usb 3-10: device descriptor read/64, error -110
[  561.283530] usb 3-10: device descriptor read/64, error -110
[  561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd
[  566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500
[  568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113)
[  578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110)
[  586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113)
[  596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110)

Or kernel panics because other workqueues already freed skb:
[ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 2048.663775] #PF: supervisor read access in kernel mode
[ 2048.663779] #PF: error_code(0x0000) - not-present page
[ 2048.663782] PGD 0 P4D 0
[ 2048.663787] Oops: 0000 [#1] SMP NOPTI
[ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G        W         5.13.0-rc1-next-20210510+ #20
[ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020
[ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50
[ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1
07 83 f8 01
[ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286
[ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000
[ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000
[ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0
[ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000
[ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000
[ 2048.663843] FS:  00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000
[ 2048.663849] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0
[ 2048.663856] PKRU: 55555554
[ 2048.663859] Call Trace:
[ 2048.663865]  ? skb_release_head_state+0x5e/0x80
[ 2048.663873]  kfree_skb+0x2f/0xb0
[ 2048.663881]  btusb_shutdown_intel_new+0x36/0x60 [btusb]
[ 2048.663905]  hci_dev_do_close+0x48c/0x5e0 [bluetooth]
[ 2048.663954]  ? __cond_resched+0x1a/0x50
[ 2048.663962]  hci_rfkill_set_block+0x56/0xa0 [bluetooth]
[ 2048.664007]  rfkill_set_block+0x98/0x170
[ 2048.664016]  rfkill_fop_write+0x136/0x1e0
[ 2048.664022]  vfs_write+0xc7/0x260
[ 2048.664030]  ksys_write+0xb1/0xe0
[ 2048.664035]  ? exit_to_user_mode_prepare+0x37/0x1c0
[ 2048.664042]  __x64_sys_write+0x1a/0x20
[ 2048.664048]  do_syscall_64+0x40/0xb0
[ 2048.664055]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 2048.664060] RIP: 0033:0x7fe02ac23c27
[ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27
[ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003
[ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440
[ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
[ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff

So move the shutdown callback to a place where workqueues are either
flushed or cancelled to resolve the issue.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/bluetooth/hci_core.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index ba5c899d1edf..0958dbdd2906 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1569,14 +1569,6 @@ int hci_dev_do_close(struct hci_dev *hdev)
 
 	BT_DBG("%s %p", hdev->name, hdev);
 
-	if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
-	    !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
-	    test_bit(HCI_UP, &hdev->flags)) {
-		/* Execute vendor specific shutdown routine */
-		if (hdev->shutdown)
-			hdev->shutdown(hdev);
-	}
-
 	cancel_delayed_work(&hdev->power_off);
 
 	hci_request_cancel_all(hdev);
@@ -1644,6 +1636,14 @@ int hci_dev_do_close(struct hci_dev *hdev)
 		clear_bit(HCI_INIT, &hdev->flags);
 	}
 
+	if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) &&
+	    !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) &&
+	    test_bit(HCI_UP, &hdev->flags)) {
+		/* Execute vendor specific shutdown routine */
+		if (hdev->shutdown)
+			hdev->shutdown(hdev);
+	}
+
 	/* flush cmd  work */
 	flush_work(&hdev->cmd_work);
 
-- 
2.30.2

[PATCH AUTOSEL 4.14 44/45] sctp: validate from_addr_param return

[Sasha Levin]

From: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>

[ Upstream commit 0c5dc070ff3d6246d22ddd931f23a6266249e3db ]

Ilja reported that, simply putting it, nothing was validating that
from_addr_param functions were operating on initialized memory. That is,
the parameter itself was being validated by sctp_walk_params, but it
doesn't check for types and their specific sizes and it could be a 0-length
one, causing from_addr_param to potentially work over the next parameter or
even uninitialized memory.

The fix here is to, in all calls to from_addr_param, check if enough space
is there for the wanted IP address type.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/sctp/structs.h |  2 +-
 net/sctp/bind_addr.c       | 19 +++++++++++--------
 net/sctp/input.c           |  6 ++++--
 net/sctp/ipv6.c            |  7 ++++++-
 net/sctp/protocol.c        |  7 ++++++-
 net/sctp/sm_make_chunk.c   | 29 ++++++++++++++++-------------
 6 files changed, 44 insertions(+), 26 deletions(-)

diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index c1f71dd464d3..5831a304e61b 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -441,7 +441,7 @@ struct sctp_af {
 					 int saddr);
 	void		(*from_sk)	(union sctp_addr *,
 					 struct sock *sk);
-	void		(*from_addr_param) (union sctp_addr *,
+	bool		(*from_addr_param) (union sctp_addr *,
 					    union sctp_addr_param *,
 					    __be16 port, int iif);
 	int		(*to_addr_param) (const union sctp_addr *,
diff --git a/net/sctp/bind_addr.c b/net/sctp/bind_addr.c
index 38d01cfb313e..f8a283245672 100644
--- a/net/sctp/bind_addr.c
+++ b/net/sctp/bind_addr.c
@@ -285,22 +285,19 @@ int sctp_raw_to_bind_addrs(struct sctp_bind_addr *bp, __u8 *raw_addr_list,
 		rawaddr = (union sctp_addr_param *)raw_addr_list;
 
 		af = sctp_get_af_specific(param_type2af(param->type));
-		if (unlikely(!af)) {
+		if (unlikely(!af) ||
+		    !af->from_addr_param(&addr, rawaddr, htons(port), 0)) {
 			retval = -EINVAL;
-			sctp_bind_addr_clean(bp);
-			break;
+			goto out_err;
 		}
 
-		af->from_addr_param(&addr, rawaddr, htons(port), 0);
 		if (sctp_bind_addr_state(bp, &addr) != -1)
 			goto next;
 		retval = sctp_add_bind_addr(bp, &addr, sizeof(addr),
 					    SCTP_ADDR_SRC, gfp);
-		if (retval) {
+		if (retval)
 			/* Can't finish building the list, clean up. */
-			sctp_bind_addr_clean(bp);
-			break;
-		}
+			goto out_err;
 
 next:
 		len = ntohs(param->length);
@@ -309,6 +306,12 @@ int sctp_raw_to_bind_addrs(struct sctp_bind_addr *bp, __u8 *raw_addr_list,
 	}
 
 	return retval;
+
+out_err:
+	if (retval)
+		sctp_bind_addr_clean(bp);
+
+	return retval;
 }
 
 /********************************************************************
diff --git a/net/sctp/input.c b/net/sctp/input.c
index fab6a34fb89f..7380f0a5949b 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -1081,7 +1081,8 @@ static struct sctp_association *__sctp_rcv_init_lookup(struct net *net,
 		if (!af)
 			continue;
 
-		af->from_addr_param(paddr, params.addr, sh->source, 0);
+		if (!af->from_addr_param(paddr, params.addr, sh->source, 0))
+			continue;
 
 		asoc = __sctp_lookup_association(net, laddr, paddr, transportp);
 		if (asoc)
@@ -1124,7 +1125,8 @@ static struct sctp_association *__sctp_rcv_asconf_lookup(
 	if (unlikely(!af))
 		return NULL;
 
-	af->from_addr_param(&paddr, param, peer_port, 0);
+	if (af->from_addr_param(&paddr, param, peer_port, 0))
+		return NULL;
 
 	return __sctp_lookup_association(net, laddr, &paddr, transportp);
 }
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index b61e9ed109f6..295466379ea0 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -490,15 +490,20 @@ static void sctp_v6_to_sk_daddr(union sctp_addr *addr, struct sock *sk)
 }
 
 /* Initialize a sctp_addr from an address parameter. */
-static void sctp_v6_from_addr_param(union sctp_addr *addr,
+static bool sctp_v6_from_addr_param(union sctp_addr *addr,
 				    union sctp_addr_param *param,
 				    __be16 port, int iif)
 {
+	if (ntohs(param->v6.param_hdr.length) < sizeof(struct sctp_ipv6addr_param))
+		return false;
+
 	addr->v6.sin6_family = AF_INET6;
 	addr->v6.sin6_port = port;
 	addr->v6.sin6_flowinfo = 0; /* BUG */
 	addr->v6.sin6_addr = param->v6.addr;
 	addr->v6.sin6_scope_id = iif;
+
+	return true;
 }
 
 /* Initialize an address parameter from a sctp_addr and return the length
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 8fe9c0646205..d5cf05efddfd 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -279,14 +279,19 @@ static void sctp_v4_to_sk_daddr(union sctp_addr *addr, struct sock *sk)
 }
 
 /* Initialize a sctp_addr from an address parameter. */
-static void sctp_v4_from_addr_param(union sctp_addr *addr,
+static bool sctp_v4_from_addr_param(union sctp_addr *addr,
 				    union sctp_addr_param *param,
 				    __be16 port, int iif)
 {
+	if (ntohs(param->v4.param_hdr.length) < sizeof(struct sctp_ipv4addr_param))
+		return false;
+
 	addr->v4.sin_family = AF_INET;
 	addr->v4.sin_port = port;
 	addr->v4.sin_addr.s_addr = param->v4.addr.s_addr;
 	memset(addr->v4.sin_zero, 0, sizeof(addr->v4.sin_zero));
+
+	return true;
 }
 
 /* Initialize an address parameter from a sctp_addr and return the length
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 1cd22a38fe42..3a7bee87054a 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2341,11 +2341,13 @@ int sctp_process_init(struct sctp_association *asoc, struct sctp_chunk *chunk,
 
 	/* Process the initialization parameters.  */
 	sctp_walk_params(param, peer_init, init_hdr.params) {
-		if (!src_match && (param.p->type == SCTP_PARAM_IPV4_ADDRESS ||
-		    param.p->type == SCTP_PARAM_IPV6_ADDRESS)) {
+		if (!src_match &&
+		    (param.p->type == SCTP_PARAM_IPV4_ADDRESS ||
+		     param.p->type == SCTP_PARAM_IPV6_ADDRESS)) {
 			af = sctp_get_af_specific(param_type2af(param.p->type));
-			af->from_addr_param(&addr, param.addr,
-					    chunk->sctp_hdr->source, 0);
+			if (!af->from_addr_param(&addr, param.addr,
+						 chunk->sctp_hdr->source, 0))
+				continue;
 			if (sctp_cmp_addr_exact(sctp_source(chunk), &addr))
 				src_match = 1;
 		}
@@ -2523,7 +2525,8 @@ static int sctp_process_param(struct sctp_association *asoc,
 			break;
 do_addr_param:
 		af = sctp_get_af_specific(param_type2af(param.p->type));
-		af->from_addr_param(&addr, param.addr, htons(asoc->peer.port), 0);
+		if (!af->from_addr_param(&addr, param.addr, htons(asoc->peer.port), 0))
+			break;
 		scope = sctp_scope(peer_addr);
 		if (sctp_in_scope(net, &addr, scope))
 			if (!sctp_assoc_add_peer(asoc, &addr, gfp, SCTP_UNCONFIRMED))
@@ -2620,15 +2623,13 @@ static int sctp_process_param(struct sctp_association *asoc,
 		addr_param = param.v + sizeof(struct sctp_addip_param);
 
 		af = sctp_get_af_specific(param_type2af(addr_param->p.type));
-		if (af == NULL)
+		if (!af)
 			break;
 
-		af->from_addr_param(&addr, addr_param,
-				    htons(asoc->peer.port), 0);
+		if (!af->from_addr_param(&addr, addr_param,
+					 htons(asoc->peer.port), 0))
+			break;
 
-		/* if the address is invalid, we can't process it.
-		 * XXX: see spec for what to do.
-		 */
 		if (!af->addr_valid(&addr, NULL, NULL))
 			break;
 
@@ -3045,7 +3046,8 @@ static __be16 sctp_process_asconf_param(struct sctp_association *asoc,
 	if (unlikely(!af))
 		return SCTP_ERROR_DNS_FAILED;
 
-	af->from_addr_param(&addr, addr_param, htons(asoc->peer.port), 0);
+	if (!af->from_addr_param(&addr, addr_param, htons(asoc->peer.port), 0))
+		return SCTP_ERROR_DNS_FAILED;
 
 	/* ADDIP 4.2.1  This parameter MUST NOT contain a broadcast
 	 * or multicast address.
@@ -3310,7 +3312,8 @@ static void sctp_asconf_param_success(struct sctp_association *asoc,
 
 	/* We have checked the packet before, so we do not check again.	*/
 	af = sctp_get_af_specific(param_type2af(addr_param->p.type));
-	af->from_addr_param(&addr, addr_param, htons(bp->port), 0);
+	if (!af->from_addr_param(&addr, addr_param, htons(bp->port), 0))
+		return;
 
 	switch (asconf_param->param_hdr.type) {
 	case SCTP_PARAM_ADD_IP:
-- 
2.30.2

[PATCH AUTOSEL 4.14 45/45] sctp: add size validation when walking chunks

[Sasha Levin]

From: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>

[ Upstream commit 50619dbf8db77e98d821d615af4f634d08e22698 ]

The first chunk in a packet is ensured to be present at the beginning of
sctp_rcv(), as a packet needs to have at least 1 chunk. But the second
one, may not be completely available and ch->length can be over
uninitialized memory.

Fix here is by only trying to walk on the next chunk if there is enough to
hold at least the header, and then proceed with the ch->length validation
that is already there.

Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sctp/input.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sctp/input.c b/net/sctp/input.c
index 7380f0a5949b..1af35b69e99e 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -1197,7 +1197,7 @@ static struct sctp_association *__sctp_rcv_walk_lookup(struct net *net,
 
 		ch = (struct sctp_chunkhdr *)ch_end;
 		chunk_num++;
-	} while (ch_end < skb_tail_pointer(skb));
+	} while (ch_end + sizeof(*ch) < skb_tail_pointer(skb));
 
 	return asoc;
 }
-- 
2.30.2