Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: davem@davemloft.net, kuba@kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, festevam@gmail.com,
	kernel@pengutronix.de, linux-imx@nxp.com, peppe.cavallaro@st.com,
	joabreu@synopsys.com, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next V1 2/3] dt-bindings: net: imx-dwmac: convert imx-dwmac bindings to yaml
Date: Wed, 21 Jul 2021 10:53:00 -0600	[thread overview]
Message-ID: <20210721165300.GA2430128@robh.at.kernel.org> (raw)
In-Reply-To: <20210719071821.31583-3-qiangqing.zhang@nxp.com>

On Mon, Jul 19, 2021 at 03:18:20PM +0800, Joakim Zhang wrote:
> In order to automate the verification of DT nodes covert imx-dwmac to
> nxp,dwmac-imx.yaml, and pass below checking.
> 
> $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> $ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> 
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> ---
>  .../devicetree/bindings/net/imx-dwmac.txt     | 56 -----------
>  .../bindings/net/nxp,dwmac-imx.yaml           | 93 +++++++++++++++++++
>  2 files changed, 93 insertions(+), 56 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/net/imx-dwmac.txt
>  create mode 100644 Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/imx-dwmac.txt b/Documentation/devicetree/bindings/net/imx-dwmac.txt
> deleted file mode 100644
> index 921d522fe8d7..000000000000
> --- a/Documentation/devicetree/bindings/net/imx-dwmac.txt
> +++ /dev/null
> @@ -1,56 +0,0 @@
> -IMX8 glue layer controller, NXP imx8 families support Synopsys MAC 5.10a IP.
> -
> -This file documents platform glue layer for IMX.
> -Please see stmmac.txt for the other unchanged properties.
> -
> -The device node has following properties.
> -
> -Required properties:
> -- compatible:  Should be "nxp,imx8mp-dwmac-eqos" to select glue layer
> -	       and "snps,dwmac-5.10a" to select IP version.
> -- clocks: Must contain a phandle for each entry in clock-names.
> -- clock-names: Should be "stmmaceth" for the host clock.
> -	       Should be "pclk" for the MAC apb clock.
> -	       Should be "ptp_ref" for the MAC timer clock.
> -	       Should be "tx" for the MAC RGMII TX clock:
> -	       Should be "mem" for EQOS MEM clock.
> -		- "mem" clock is required for imx8dxl platform.
> -		- "mem" clock is not required for imx8mp platform.
> -- interrupt-names: Should contain a list of interrupt names corresponding to
> -		   the interrupts in the interrupts property, if available.
> -		   Should be "macirq" for the main MAC IRQ
> -		   Should be "eth_wake_irq" for the IT which wake up system
> -- intf_mode: Should be phandle/offset pair. The phandle to the syscon node which
> -	     encompases the GPR register, and the offset of the GPR register.
> -		- required for imx8mp platform.
> -		- is optional for imx8dxl platform.
> -
> -Optional properties:
> -- intf_mode: is optional for imx8dxl platform.
> -- snps,rmii_refclk_ext: to select RMII reference clock from external.
> -
> -Example:
> -	eqos: ethernet@30bf0000 {
> -		compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
> -		reg = <0x30bf0000 0x10000>;
> -		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> -			     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
> -		interrupt-names = "eth_wake_irq", "macirq";
> -		clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
> -			 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
> -			 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
> -			 <&clk IMX8MP_CLK_ENET_QOS>;
> -		clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
> -		assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
> -				  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
> -				  <&clk IMX8MP_CLK_ENET_QOS>;
> -		assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
> -					 <&clk IMX8MP_SYS_PLL2_100M>,
> -					 <&clk IMX8MP_SYS_PLL2_125M>;
> -		assigned-clock-rates = <0>, <100000000>, <125000000>;
> -		nvmem-cells = <&eth_mac0>;
> -		nvmem-cell-names = "mac-address";
> -		nvmem_macaddr_swap;
> -		intf_mode = <&gpr 0x4>;
> -		status = "disabled";
> -	};
> diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> new file mode 100644
> index 000000000000..5629b2e4ccf8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
> @@ -0,0 +1,93 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX8 DWMAC glue layer Device Tree Bindings
> +
> +maintainers:
> +  - Joakim Zhang <qiangqing.zhang@nxp.com>
> +
> +# We need a select here so we don't match all nodes with 'snps,dwmac'
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - nxp,imx8mp-dwmac-eqos
> +          - nxp,imx8dxl-dwmac-eqos
> +  required:
> +    - compatible
> +
> +allOf:
> +  - $ref: "snps,dwmac.yaml#"
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:

Don't need 'oneOf' as there is only one entry.

> +          - enum:
> +              - nxp,imx8mp-dwmac-eqos
> +              - nxp,imx8dxl-dwmac-eqos
> +          - const: snps,dwmac-5.10a
> +
> +  clocks:
> +    minItems: 3
> +    maxItems: 5
> +    items:
> +      - description: MAC host clock
> +      - description: MAC apb clock
> +      - description: MAC timer clock
> +      - description: MAC RGMII TX clock
> +      - description: EQOS MEM clock
> +
> +  clock-names:
> +    minItems: 3
> +    maxItems: 5
> +    contains:

s/contains/items/

But really, like the other one, can't you define the order?

> +      enum:
> +        - stmmaceth
> +        - pclk
> +        - ptp_ref
> +        - tx
> +        - mem
> +
> +  intf_mode:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      Should be phandle/offset pair. The phandle to the syscon node which
> +      encompases the GPR register, and the offset of the GPR register.

Sounds like 2 cells:

maxItems: 2

> +
> +  snps,rmii_refclk_ext:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      To select RMII reference clock from external.
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/clock/imx8mp-clock.h>
> +
> +    eqos: ethernet@30bf0000 {
> +            compatible = "nxp,imx8mp-dwmac-eqos","snps,dwmac-5.10a";
> +            reg = <0x30bf0000 0x10000>;
> +            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "macirq", "eth_wake_irq";
> +            clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
> +                     <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
> +                     <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
> +                     <&clk IMX8MP_CLK_ENET_QOS>;
> +            clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
> +            phy-mode = "rgmii";
> +            status = "disabled";

Why are you disabling your example? Drop.

> +    };
> -- 
> 2.17.1
> 
> 

  reply	other threads:[~2021-07-21 16:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-19  7:18 [PATCH net-next V1 0/3] dt-bindings: net: dwmac-imx: convert Joakim Zhang
2021-07-19  7:18 ` [PATCH net-next V1 1/3] dt-bindings: net: snps,dwmac: add missing DWMAC IP version Joakim Zhang
2021-07-19  7:18 ` [PATCH net-next V1 2/3] dt-bindings: net: imx-dwmac: convert imx-dwmac bindings to yaml Joakim Zhang
2021-07-21 16:53   ` Rob Herring [this message]
2021-07-22 10:36     ` Joakim Zhang
2021-07-19  7:18 ` [PATCH net-next V1 3/3] arm64: dts: imx8mp: change interrupt order per dt-binding Joakim Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210721165300.GA2430128@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=joabreu@synopsys.com \
    --cc=kernel@pengutronix.de \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    --cc=qiangqing.zhang@nxp.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --subject='Re: [PATCH net-next V1 2/3] dt-bindings: net: imx-dwmac: convert imx-dwmac bindings to yaml' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).