Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Tony Nguyen <anthony.l.nguyen@intel.com>
To: davem@davemloft.net, kuba@kernel.org
Cc: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
	netdev@vger.kernel.org, anthony.l.nguyen@intel.com,
	sassmann@redhat.com,
	Aleksandr Loktionov <aleksandr.loktionov@intel.com>,
	Tony Brelinski <tonyx.brelinski@intel.com>
Subject: [PATCH net 1/5] i40e: Fix logic of disabling queues
Date: Fri, 23 Jul 2021 10:10:19 -0700	[thread overview]
Message-ID: <20210723171023.296927-2-anthony.l.nguyen@intel.com> (raw)
In-Reply-To: <20210723171023.296927-1-anthony.l.nguyen@intel.com>

From: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>

Correct the message flow between driver and firmware when disabling
queues.

Previously in case of PF reset (due to required reinit after reconfig),
the error like: "VSI seid 397 Tx ring 60 disable timeout" could show up
occasionally. The error was not a real issue of hardware or firmware,
it was caused by wrong sequence of messages invoked by the driver.

Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 58 ++++++++++++---------
 1 file changed, 34 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 861e59a350bd..5297e6c59083 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4454,11 +4454,10 @@ int i40e_control_wait_tx_q(int seid, struct i40e_pf *pf, int pf_q,
 }
 
 /**
- * i40e_vsi_control_tx - Start or stop a VSI's rings
+ * i40e_vsi_enable_tx - Start a VSI's rings
  * @vsi: the VSI being configured
- * @enable: start or stop the rings
  **/
-static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
+static int i40e_vsi_enable_tx(struct i40e_vsi *vsi)
 {
 	struct i40e_pf *pf = vsi->back;
 	int i, pf_q, ret = 0;
@@ -4467,7 +4466,7 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
 	for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
 		ret = i40e_control_wait_tx_q(vsi->seid, pf,
 					     pf_q,
-					     false /*is xdp*/, enable);
+					     false /*is xdp*/, true);
 		if (ret)
 			break;
 
@@ -4476,7 +4475,7 @@ static int i40e_vsi_control_tx(struct i40e_vsi *vsi, bool enable)
 
 		ret = i40e_control_wait_tx_q(vsi->seid, pf,
 					     pf_q + vsi->alloc_queue_pairs,
-					     true /*is xdp*/, enable);
+					     true /*is xdp*/, true);
 		if (ret)
 			break;
 	}
@@ -4574,32 +4573,25 @@ int i40e_control_wait_rx_q(struct i40e_pf *pf, int pf_q, bool enable)
 }
 
 /**
- * i40e_vsi_control_rx - Start or stop a VSI's rings
+ * i40e_vsi_enable_rx - Start a VSI's rings
  * @vsi: the VSI being configured
- * @enable: start or stop the rings
  **/
-static int i40e_vsi_control_rx(struct i40e_vsi *vsi, bool enable)
+static int i40e_vsi_enable_rx(struct i40e_vsi *vsi)
 {
 	struct i40e_pf *pf = vsi->back;
 	int i, pf_q, ret = 0;
 
 	pf_q = vsi->base_queue;
 	for (i = 0; i < vsi->num_queue_pairs; i++, pf_q++) {
-		ret = i40e_control_wait_rx_q(pf, pf_q, enable);
+		ret = i40e_control_wait_rx_q(pf, pf_q, true);
 		if (ret) {
 			dev_info(&pf->pdev->dev,
-				 "VSI seid %d Rx ring %d %sable timeout\n",
-				 vsi->seid, pf_q, (enable ? "en" : "dis"));
+				 "VSI seid %d Rx ring %d enable timeout\n",
+				 vsi->seid, pf_q);
 			break;
 		}
 	}
 
-	/* Due to HW errata, on Rx disable only, the register can indicate done
-	 * before it really is. Needs 50ms to be sure
-	 */
-	if (!enable)
-		mdelay(50);
-
 	return ret;
 }
 
@@ -4612,29 +4604,47 @@ int i40e_vsi_start_rings(struct i40e_vsi *vsi)
 	int ret = 0;
 
 	/* do rx first for enable and last for disable */
-	ret = i40e_vsi_control_rx(vsi, true);
+	ret = i40e_vsi_enable_rx(vsi);
 	if (ret)
 		return ret;
-	ret = i40e_vsi_control_tx(vsi, true);
+	ret = i40e_vsi_enable_tx(vsi);
 
 	return ret;
 }
 
+#define I40E_DISABLE_TX_GAP_MSEC	50
+
 /**
  * i40e_vsi_stop_rings - Stop a VSI's rings
  * @vsi: the VSI being configured
  **/
 void i40e_vsi_stop_rings(struct i40e_vsi *vsi)
 {
+	struct i40e_pf *pf = vsi->back;
+	int pf_q, err, q_end;
+
 	/* When port TX is suspended, don't wait */
 	if (test_bit(__I40E_PORT_SUSPENDED, vsi->back->state))
 		return i40e_vsi_stop_rings_no_wait(vsi);
 
-	/* do rx first for enable and last for disable
-	 * Ignore return value, we need to shutdown whatever we can
-	 */
-	i40e_vsi_control_tx(vsi, false);
-	i40e_vsi_control_rx(vsi, false);
+	q_end = vsi->base_queue + vsi->num_queue_pairs;
+	for (pf_q = vsi->base_queue; pf_q < q_end; pf_q++)
+		i40e_pre_tx_queue_cfg(&pf->hw, (u32)pf_q, false);
+
+	for (pf_q = vsi->base_queue; pf_q < q_end; pf_q++) {
+		err = i40e_control_wait_rx_q(pf, pf_q, false);
+		if (err)
+			dev_info(&pf->pdev->dev,
+				 "VSI seid %d Rx ring %d dissable timeout\n",
+				 vsi->seid, pf_q);
+	}
+
+	msleep(I40E_DISABLE_TX_GAP_MSEC);
+	pf_q = vsi->base_queue;
+	for (pf_q = vsi->base_queue; pf_q < q_end; pf_q++)
+		wr32(&pf->hw, I40E_QTX_ENA(pf_q), 0);
+
+	i40e_vsi_wait_queues_disabled(vsi);
 }
 
 /**
-- 
2.26.2


  reply	other threads:[~2021-07-23 17:07 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-23 17:10 [PATCH net 0/5][pull request] Intel Wired LAN Driver Updates 2021-07-23 Tony Nguyen
2021-07-23 17:10 ` Tony Nguyen [this message]
2021-07-23 17:10 ` [PATCH net 2/5] i40e: Fix firmware LLDP agent related warning Tony Nguyen
2021-07-23 17:10 ` [PATCH net 3/5] i40e: Add additional info to PHY type error Tony Nguyen
2021-07-23 17:10 ` [PATCH net 4/5] i40e: Fix queue-to-TC mapping on Tx Tony Nguyen
2021-07-23 17:10 ` [PATCH net 5/5] i40e: Fix log TC creation failure when max num of queues is exceeded Tony Nguyen
2021-07-23 21:10 ` [PATCH net 0/5][pull request] Intel Wired LAN Driver Updates 2021-07-23 patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210723171023.296927-2-anthony.l.nguyen@intel.com \
    --to=anthony.l.nguyen@intel.com \
    --cc=aleksandr.loktionov@intel.com \
    --cc=arkadiusz.kubalewski@intel.com \
    --cc=davem@davemloft.net \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=sassmann@redhat.com \
    --cc=tonyx.brelinski@intel.com \
    --subject='Re: [PATCH net 1/5] i40e: Fix logic of disabling queues' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).