Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v4 0/2] MCAN: Add support for implementing transceiver as a phy
@ 2021-05-10  5:25 Aswath Govindraju
  2021-05-10  5:25 ` [PATCH v4 1/2] dt-bindings: net: can: Document transceiver implementation as phy Aswath Govindraju
                   ` (2 more replies)
  0 siblings, 3 replies; 9+ messages in thread
From: Aswath Govindraju @ 2021-05-10  5:25 UTC (permalink / raw)
  Cc: Chandrasekar Ramakrishnan, Wolfgang Grandegger,
	Marc Kleine-Budde, David S . Miller, Jakub Kicinski, Rob Herring,
	linux-can, netdev, devicetree, linux-kernel, Vignesh Raghavendra,
	Lokesh Vutla, Kishon Vijay Abraham I, Aswath Govindraju

The following series of patches add support for implementing the
transceiver as a phy of m_can_platform driver.

TCAN1042 has a standby signal that needs to be pulled high for
sending/receiving messages[1]. TCAN1043 has a enable signal along with
standby signal that needs to be pulled up for sending/receiving
messages[2], and other combinations of the two lines can be used to put the
transceiver in different states to reduce power consumption. On boards
like the AM654-idk and J721e-evm these signals are controlled using gpios.

These gpios are set in phy driver, and the transceiver can be put in
different states using phy API. The phy driver is added in the series [3].

This patch series is dependent on [4].

changes since v3:
- Added phy_power_off() in case of an error in m_can_open().

changes since v2:
- changed dev_err to dev_err_probe in patch 2
- used mcan_class instead of priv to assign max bit rate
- Picked up  Rob Herring's acked-by for patch 1

changes since v1:
- Used the API devm_phy_get_optional() instead of
  devm_of_phy_get_optional_by_index()

[1] - https://www.ti.com/lit/ds/symlink/tcan1042h.pdf
[2] - https://www.ti.com/lit/ds/symlink/tcan1043-q1.pdf
[3] - https://lore.kernel.org/patchwork/project/lkml/list/?series=498359
[4] - https://lore.kernel.org/patchwork/patch/1413286/

Faiz Abbas (2):
  dt-bindings: net: can: Document transceiver implementation as phy
  can: m_can: Add support for transceiver as phy

 .../devicetree/bindings/net/can/bosch,m_can.yaml    |  3 +++
 drivers/net/can/m_can/m_can.c                       | 11 +++++++++++
 drivers/net/can/m_can/m_can.h                       |  2 ++
 drivers/net/can/m_can/m_can_platform.c              | 13 +++++++++++++
 4 files changed, 29 insertions(+)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2021-07-28  5:19 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-10  5:25 [PATCH v4 0/2] MCAN: Add support for implementing transceiver as a phy Aswath Govindraju
2021-05-10  5:25 ` [PATCH v4 1/2] dt-bindings: net: can: Document transceiver implementation as phy Aswath Govindraju
2021-05-10  5:25 ` [PATCH v4 2/2] can: m_can: Add support for transceiver " Aswath Govindraju
2021-07-24 17:56   ` Marc Kleine-Budde
2021-06-14 12:32 ` [PATCH v4 0/2] MCAN: Add support for implementing transceiver as a phy Aswath Govindraju
2021-06-16  9:17   ` Marc Kleine-Budde
2021-07-19 14:17     ` Aswath Govindraju
2021-07-27  6:54       ` Marc Kleine-Budde
2021-07-28  5:19         ` Aswath Govindraju

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).