Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
	kernel@pengutronix.de,
	Vincent Mailhol <mailhol.vincent@wanadoo.fr>,
	Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH net-next 11/46] can: netlink: clear data_bittiming if FD is turned off
Date: Mon, 26 Jul 2021 16:11:09 +0200	[thread overview]
Message-ID: <20210726141144.862529-12-mkl@pengutronix.de> (raw)
In-Reply-To: <20210726141144.862529-1-mkl@pengutronix.de>

From: Vincent Mailhol <mailhol.vincent@wanadoo.fr>

When the FD is turned off through the netlink interface, the data bit
timing values still remain in data_bittiming and are displayed despite
of the feature being disabled.

Example:

| $ ip link set can0 type can bitrate 500000 dbitrate 2000000 fd on
| $ ip --details link show can0
| 1:  can0: <NOARP,ECHO> mtu 72 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10
|     link/can  promiscuity 0 minmtu 0 maxmtu 0
|     can <FD> state STOPPED restart-ms 0
| 	  bitrate 500000 sample-point 0.875
| 	  tq 12 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 1
| 	  ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 brp-inc 1
| 	  dbitrate 2000000 dsample-point 0.750
| 	  dtq 12 dprop-seg 14 dphase-seg1 15 dphase-seg2 10 dsjw 1
| 	  ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 dbrp-inc 1
| 	  clock 80000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
|
| $ ip link set can0 type can bitrate 500000 fd off
| $ ip --details link show can0
| 1:  can0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 10
|     link/can  promiscuity 0 minmtu 0 maxmtu 0
|     can state STOPPED restart-ms 0
| 	  bitrate 500000 sample-point 0.875
| 	  tq 12 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 1
| 	  ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 brp-inc 1
| 	  dbitrate 2000000 dsample-point 0.750
| 	  dtq 12 dprop-seg 14 dphase-seg1 15 dphase-seg2 10 dsjw 1
| 	  ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 dbrp-inc 1
| 	  clock 80000000 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535

Remark: once FD is turned off, it is not possible to turn fd back on
and reuse the previously input data bit timing values:

| $ ip link set can0 type can bitrate 500000 fd on
| RTNETLINK answers: Operation not supported

This means that the user will need to re-configure the data bit timing
in order to turn fd on again.

Because old data bit timing values cannot be reused, this patch clears
priv->data_bit timing whenever FD is turned off. This way, the data
bit timing variables are not displayed anymore.

Link: https://lore.kernel.org/r/20210618081904.141114-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/dev/netlink.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/dev/netlink.c b/drivers/net/can/dev/netlink.c
index e38c2566aff4..b567fd628c17 100644
--- a/drivers/net/can/dev/netlink.c
+++ b/drivers/net/can/dev/netlink.c
@@ -132,10 +132,13 @@ static int can_changelink(struct net_device *dev, struct nlattr *tb[],
 		priv->ctrlmode |= maskedflags;
 
 		/* CAN_CTRLMODE_FD can only be set when driver supports FD */
-		if (priv->ctrlmode & CAN_CTRLMODE_FD)
+		if (priv->ctrlmode & CAN_CTRLMODE_FD) {
 			dev->mtu = CANFD_MTU;
-		else
+		} else {
 			dev->mtu = CAN_MTU;
+			memset(&priv->data_bittiming, 0,
+			       sizeof(priv->data_bittiming));
+		}
 	}
 
 	if (data[IFLA_CAN_RESTART_MS]) {
-- 
2.30.2



  parent reply	other threads:[~2021-07-26 14:12 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-26 14:10 pull-request: can-next 2021-07-25 Marc Kleine-Budde
2021-07-26 14:10 ` [PATCH net-next 01/46] can: j1939: j1939_sk_sock_destruct(): correct a grammatical error Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 02/46] can: j1939: fix checkpatch warnings Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 03/46] can: j1939: replace fall through comment by fallthrough pseudo-keyword Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 04/46] can: j1939: j1939_session_completed(): use consistent name se_skb for the session skb Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 05/46] can: j1939: j1939_session_tx_dat(): use consistent name se_skcb for session skb control buffer Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 06/46] can: j1939: j1939_xtp_rx_dat_one(): use separate pointer " Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 07/46] can: rx-offload: add skb queue for use during ISR Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 08/46] can: rx-offload: can_rx_offload_irq_finish(): directly call napi_schedule() Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 09/46] can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 10/46] can: bittiming: fix documentation for struct can_tdc Marc Kleine-Budde
2021-07-26 14:11 ` Marc Kleine-Budde [this message]
2021-07-26 14:11 ` [PATCH net-next 12/46] can: netlink: remove redundant check in can_validate() Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 13/46] dt-bindings: net: can: Document transceiver implementation as phy Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 14/46] can: m_can: Add support for transceiver " Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 15/46] can: m_can: use devm_platform_ioremap_resource_byname Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 16/46] can: m_can: remove support for custom bit timing Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 17/46] can: mcp251xfd: mcp251xfd_probe(): try to get crystal clock rate from property Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 18/46] can: mcp251xfd: Fix header block to clarify independence from OF Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 19/46] can: mcp251xfd: mcp251xfd_open(): request IRQ as shared Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 20/46] can: esd_usb2: use DEVICE_ATTR_RO() helper macro Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 21/46] can: janz-ican3: use DEVICE_ATTR_RO/RW() " Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 22/46] can: at91_can: use DEVICE_ATTR_RW() " Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 23/46] net: at91_can: remove redundant blank lines Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 24/46] net: at91_can: add blank line after declarations Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 25/46] net: at91_can: fix the code style issue about macro Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 26/46] net: at91_can: use BIT macro Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 27/46] net: at91_can: fix the alignment issue Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 28/46] net: at91_can: add braces {} to all arms of the statement Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 29/46] net: at91_can: remove redundant space Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 30/46] net: at91_can: fix the comments style issue Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 31/46] can: peak_pci: convert comments to network style comments Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 32/46] can: peak_pci: fix checkpatch warnings Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 33/46] can: peak_pci: Add name and FW version of the card in kernel buffer Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 34/46] can: peak_usb: pcan_usb_get_device_id(): read value only in case of success Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 35/46] can: peak_usb: PCAN-USB: add support of loopback and one-shot mode Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 36/46] can: peak_usb: pcan_usb_encode_msg(): add information Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 37/46] can: peak_usb: pcan_usb_decode_error(): upgrade handling of bus state changes Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 38/46] can: etas_es58x: fix three typos in author name and documentation Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 39/46] can: etas_es58x: use error pointer during device probing Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 40/46] can: etas_es58x: use devm_kzalloc() to allocate device resources Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 41/46] can: etas_es58x: add es58x_free_netdevs() to factorize code Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 42/46] can: etas_es58x: use sizeof and sizeof_field macros instead of constant values Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 43/46] can: etas_es58x: rewrite the message cast in es58{1,_fd}_tx_can_msg to increase readability Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 44/46] can: flexcan: add platform data header Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 45/46] can: flexcan: add mcf5441x support Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 46/46] can: flexcan: update Kconfig to enable coldfire Marc Kleine-Budde
2021-07-26 21:20 ` pull-request: can-next 2021-07-25 patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210726141144.862529-12-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=davem@davemloft.net \
    --cc=kernel@pengutronix.de \
    --cc=kuba@kernel.org \
    --cc=linux-can@vger.kernel.org \
    --cc=mailhol.vincent@wanadoo.fr \
    --cc=netdev@vger.kernel.org \
    --subject='Re: [PATCH net-next 11/46] can: netlink: clear data_bittiming if FD is turned off' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).