Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
	kernel@pengutronix.de, Faiz Abbas <faiz_abbas@ti.com>,
	Aswath Govindraju <a-govindraju@ti.com>,
	Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH net-next 14/46] can: m_can: Add support for transceiver as phy
Date: Mon, 26 Jul 2021 16:11:12 +0200	[thread overview]
Message-ID: <20210726141144.862529-15-mkl@pengutronix.de> (raw)
In-Reply-To: <20210726141144.862529-1-mkl@pengutronix.de>

From: Faiz Abbas <faiz_abbas@ti.com>

Add support for implementing transceiver node as phy. The max_bitrate
is obtained by getting a phy attribute.

Link: https://lore.kernel.org/r/20210724174001.553047-1-mkl@pengutronix.de
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/m_can/m_can.c          | 11 ++++++++++-
 drivers/net/can/m_can/m_can.h          |  2 ++
 drivers/net/can/m_can/m_can_platform.c | 13 +++++++++++++
 3 files changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 317cdc98c539..c430432c28ec 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -21,6 +21,7 @@
 #include <linux/iopoll.h>
 #include <linux/can/dev.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/phy/phy.h>
 
 #include "m_can.h"
 
@@ -1521,6 +1522,8 @@ static int m_can_close(struct net_device *dev)
 	close_candev(dev);
 	can_led_event(dev, CAN_LED_EVENT_STOP);
 
+	phy_power_off(cdev->transceiver);
+
 	return 0;
 }
 
@@ -1706,10 +1709,14 @@ static int m_can_open(struct net_device *dev)
 	struct m_can_classdev *cdev = netdev_priv(dev);
 	int err;
 
-	err = m_can_clk_start(cdev);
+	err = phy_power_on(cdev->transceiver);
 	if (err)
 		return err;
 
+	err = m_can_clk_start(cdev);
+	if (err)
+		goto out_phy_power_off;
+
 	/* open the can device */
 	err = open_candev(dev);
 	if (err) {
@@ -1766,6 +1773,8 @@ static int m_can_open(struct net_device *dev)
 	close_candev(dev);
 exit_disable_clks:
 	m_can_clk_stop(cdev);
+out_phy_power_off:
+	phy_power_off(cdev->transceiver);
 	return err;
 }
 
diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
index ace071c3e58c..38cad068abad 100644
--- a/drivers/net/can/m_can/m_can.h
+++ b/drivers/net/can/m_can/m_can.h
@@ -28,6 +28,7 @@
 #include <linux/iopoll.h>
 #include <linux/can/dev.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/phy/phy.h>
 
 /* m_can lec values */
 enum m_can_lec_type {
@@ -82,6 +83,7 @@ struct m_can_classdev {
 	struct workqueue_struct *tx_wq;
 	struct work_struct tx_work;
 	struct sk_buff *tx_skb;
+	struct phy *transceiver;
 
 	struct can_bittiming_const *bit_timing;
 	struct can_bittiming_const *data_timing;
diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
index 599de0e08cd7..8b5819cd4b80 100644
--- a/drivers/net/can/m_can/m_can_platform.c
+++ b/drivers/net/can/m_can/m_can_platform.c
@@ -6,6 +6,7 @@
 // Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
 
 #include <linux/platform_device.h>
+#include <linux/phy/phy.h>
 
 #include "m_can.h"
 
@@ -67,6 +68,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
 	struct resource *res;
 	void __iomem *addr;
 	void __iomem *mram_addr;
+	struct phy *transceiver;
 	int irq, ret = 0;
 
 	mcan_class = m_can_class_allocate_dev(&pdev->dev,
@@ -101,6 +103,16 @@ static int m_can_plat_probe(struct platform_device *pdev)
 		goto probe_fail;
 	}
 
+	transceiver = devm_phy_optional_get(&pdev->dev, NULL);
+	if (IS_ERR(transceiver)) {
+		ret = PTR_ERR(transceiver);
+		dev_err_probe(&pdev->dev, ret, "failed to get phy\n");
+		goto probe_fail;
+	}
+
+	if (transceiver)
+		mcan_class->can.bitrate_max = transceiver->attrs.max_link_rate;
+
 	priv->base = addr;
 	priv->mram_base = mram_addr;
 
@@ -108,6 +120,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
 	mcan_class->pm_clock_support = 1;
 	mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);
 	mcan_class->dev = &pdev->dev;
+	mcan_class->transceiver = transceiver;
 
 	mcan_class->ops = &m_can_plat_ops;
 
-- 
2.30.2



  parent reply	other threads:[~2021-07-26 14:13 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-26 14:10 pull-request: can-next 2021-07-25 Marc Kleine-Budde
2021-07-26 14:10 ` [PATCH net-next 01/46] can: j1939: j1939_sk_sock_destruct(): correct a grammatical error Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 02/46] can: j1939: fix checkpatch warnings Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 03/46] can: j1939: replace fall through comment by fallthrough pseudo-keyword Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 04/46] can: j1939: j1939_session_completed(): use consistent name se_skb for the session skb Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 05/46] can: j1939: j1939_session_tx_dat(): use consistent name se_skcb for session skb control buffer Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 06/46] can: j1939: j1939_xtp_rx_dat_one(): use separate pointer " Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 07/46] can: rx-offload: add skb queue for use during ISR Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 08/46] can: rx-offload: can_rx_offload_irq_finish(): directly call napi_schedule() Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 09/46] can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 10/46] can: bittiming: fix documentation for struct can_tdc Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 11/46] can: netlink: clear data_bittiming if FD is turned off Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 12/46] can: netlink: remove redundant check in can_validate() Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 13/46] dt-bindings: net: can: Document transceiver implementation as phy Marc Kleine-Budde
2021-07-26 14:11 ` Marc Kleine-Budde [this message]
2021-07-26 14:11 ` [PATCH net-next 15/46] can: m_can: use devm_platform_ioremap_resource_byname Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 16/46] can: m_can: remove support for custom bit timing Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 17/46] can: mcp251xfd: mcp251xfd_probe(): try to get crystal clock rate from property Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 18/46] can: mcp251xfd: Fix header block to clarify independence from OF Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 19/46] can: mcp251xfd: mcp251xfd_open(): request IRQ as shared Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 20/46] can: esd_usb2: use DEVICE_ATTR_RO() helper macro Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 21/46] can: janz-ican3: use DEVICE_ATTR_RO/RW() " Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 22/46] can: at91_can: use DEVICE_ATTR_RW() " Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 23/46] net: at91_can: remove redundant blank lines Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 24/46] net: at91_can: add blank line after declarations Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 25/46] net: at91_can: fix the code style issue about macro Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 26/46] net: at91_can: use BIT macro Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 27/46] net: at91_can: fix the alignment issue Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 28/46] net: at91_can: add braces {} to all arms of the statement Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 29/46] net: at91_can: remove redundant space Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 30/46] net: at91_can: fix the comments style issue Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 31/46] can: peak_pci: convert comments to network style comments Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 32/46] can: peak_pci: fix checkpatch warnings Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 33/46] can: peak_pci: Add name and FW version of the card in kernel buffer Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 34/46] can: peak_usb: pcan_usb_get_device_id(): read value only in case of success Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 35/46] can: peak_usb: PCAN-USB: add support of loopback and one-shot mode Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 36/46] can: peak_usb: pcan_usb_encode_msg(): add information Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 37/46] can: peak_usb: pcan_usb_decode_error(): upgrade handling of bus state changes Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 38/46] can: etas_es58x: fix three typos in author name and documentation Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 39/46] can: etas_es58x: use error pointer during device probing Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 40/46] can: etas_es58x: use devm_kzalloc() to allocate device resources Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 41/46] can: etas_es58x: add es58x_free_netdevs() to factorize code Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 42/46] can: etas_es58x: use sizeof and sizeof_field macros instead of constant values Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 43/46] can: etas_es58x: rewrite the message cast in es58{1,_fd}_tx_can_msg to increase readability Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 44/46] can: flexcan: add platform data header Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 45/46] can: flexcan: add mcf5441x support Marc Kleine-Budde
2021-07-26 14:11 ` [PATCH net-next 46/46] can: flexcan: update Kconfig to enable coldfire Marc Kleine-Budde
2021-07-26 21:20 ` pull-request: can-next 2021-07-25 patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210726141144.862529-15-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=a-govindraju@ti.com \
    --cc=davem@davemloft.net \
    --cc=faiz_abbas@ti.com \
    --cc=kernel@pengutronix.de \
    --cc=kuba@kernel.org \
    --cc=linux-can@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --subject='Re: [PATCH net-next 14/46] can: m_can: Add support for transceiver as phy' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).