Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Gerhard Engleder <gerhard@engleder-embedded.com>
To: davem@davemloft.net, kuba@kernel.org, robh+dt@kernel.org,
	michal.simek@xilinx.com
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
	Gerhard Engleder <gerhard@engleder-embedded.com>
Subject: [PATCH net-next v3 0/5] TSN endpoint Ethernet MAC driver
Date: Mon, 26 Jul 2021 21:40:31 +0200	[thread overview]
Message-ID: <20210726194036.14516-1-gerhard@engleder-embedded.com> (raw)

This series adds a driver for my FPGA based TSN endpoint Ethernet MAC.
It also includes device tree binding and a device tree for the reference
platform.

The device is designed as Ethernet MAC for TSN networks. It will be used
in PLCs with real-time requirements up to isochronous communication with
protocols like OPC UA Pub/Sub.

I'm looking forward to your comments!

Gerhard Engleder (5):
  dt-bindings: Add vendor prefix for Engleder
  dt-bindings: net: Add tsnep Ethernet controller
  dt-bindings: arm: Add Engleder bindings
  tsnep: Add TSN endpoint Ethernet MAC driver
  arm64: dts: zynqmp: Add ZCU104 based TSN endpoint

 .../devicetree/bindings/arm/engleder.yaml     |   22 +
 .../bindings/net/engleder,tsnep.yaml          |   77 +
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 arch/arm64/boot/dts/xilinx/Makefile           |    1 +
 arch/arm64/boot/dts/xilinx/zynqmp-tsnep.dts   |   50 +
 drivers/net/ethernet/Kconfig                  |    1 +
 drivers/net/ethernet/Makefile                 |    1 +
 drivers/net/ethernet/engleder/Kconfig         |   28 +
 drivers/net/ethernet/engleder/Makefile        |    9 +
 drivers/net/ethernet/engleder/tsnep.h         |  199 +++
 drivers/net/ethernet/engleder/tsnep_ethtool.c |  287 ++++
 drivers/net/ethernet/engleder/tsnep_hw.h      |  276 ++++
 drivers/net/ethernet/engleder/tsnep_main.c    | 1418 +++++++++++++++++
 drivers/net/ethernet/engleder/tsnep_ptp.c     |  224 +++
 drivers/net/ethernet/engleder/tsnep_stream.c  |  489 ++++++
 drivers/net/ethernet/engleder/tsnep_tc.c      |  443 +++++
 drivers/net/ethernet/engleder/tsnep_test.c    |  811 ++++++++++
 17 files changed, 4338 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/engleder.yaml
 create mode 100644 Documentation/devicetree/bindings/net/engleder,tsnep.yaml
 create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-tsnep.dts
 create mode 100644 drivers/net/ethernet/engleder/Kconfig
 create mode 100644 drivers/net/ethernet/engleder/Makefile
 create mode 100644 drivers/net/ethernet/engleder/tsnep.h
 create mode 100644 drivers/net/ethernet/engleder/tsnep_ethtool.c
 create mode 100644 drivers/net/ethernet/engleder/tsnep_hw.h
 create mode 100644 drivers/net/ethernet/engleder/tsnep_main.c
 create mode 100644 drivers/net/ethernet/engleder/tsnep_ptp.c
 create mode 100644 drivers/net/ethernet/engleder/tsnep_stream.c
 create mode 100644 drivers/net/ethernet/engleder/tsnep_tc.c
 create mode 100644 drivers/net/ethernet/engleder/tsnep_test.c

-- 
2.20.1


                 reply	other threads:[~2021-07-26 19:41 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210726194036.14516-1-gerhard@engleder-embedded.com \
    --to=gerhard@engleder-embedded.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=kuba@kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH net-next v3 0/5] TSN endpoint Ethernet MAC driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).