Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Vladimir Oltean <olteanv@gmail.com>
To: DENG Qingfang <dqfext@gmail.com>
Cc: Sean Wang <sean.wang@mediatek.com>,
Landen Chao <Landen.Chao@mediatek.com>,
Andrew Lunn <andrew@lunn.ch>,
Vivien Didelot <vivien.didelot@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [RFC net-next 2/2] net: dsa: mt7530: trap packets from standalone ports to the CPU
Date: Wed, 28 Jul 2021 21:47:42 +0300 [thread overview]
Message-ID: <20210728184742.cyoh7ucvxwlbdpnu@skbuf> (raw)
In-Reply-To: <20210728175327.1150120-3-dqfext@gmail.com>
On Thu, Jul 29, 2021 at 01:53:26AM +0800, DENG Qingfang wrote:
> /* Register for setup vlan and acl write data */
> @@ -153,6 +162,35 @@ enum mt7530_vlan_cmd {
> #define PORT_MEM_SHFT 16
> #define PORT_MEM_MASK 0xff
>
> +/* ACL rule pattern */
> +#define BIT_CMP(x) (((x) & 0xffff) << 16)
> +#define CMP_PAT(x) ((x) & 0xffff)
not used
> +
> +/* ACL rule action */
> +#define ACL_MANG BIT(29)
> +#define ACL_INT_EN BIT(28)
> +#define ACL_CNT_EN BIT(27)
> +#define ACL_CNT_IDX(x) (((x) & 0x7) << 24)
> +#define VLAN_PORT_EN BIT(23)
> +#define DA_SWAP BIT(22)
> +#define SA_SWAP BIT(21)
> +#define PPP_RM BIT(20)
> +#define LKY_VLAN BIT(19)
> +#define ACL_EG_TAG(x) (((x) & 0x7) << 16)
> +#define ACL_PORT(x) (((x) & 0xff) << 8)
> +#define ACL_PORT_EN BIT(7)
> +#define PRI_USER(x) (((x) & 0x7) << 4)
> +#define ACL_MIR_EN BIT(3)
> +#define ACL_PORT_FW(x) ((x) & 0x7)
> +
> +enum mt7530_to_cpu_port_fw {
> + PORT_FW_DEFAULT,
> + PORT_FW_EXCLUDE_CPU = 4,
> + PORT_FW_INCLUDE_CPU,
> + PORT_FW_CPU_ONLY,
> + PORT_FW_DROP,
> +};
not used
> +
> #define MT7530_VAWD2 0x98
> /* Egress Tag Control */
> #define ETAG_CTRL_P(p, x) (((x) & 0x3) << ((p) << 1))
> @@ -164,6 +202,23 @@ enum mt7530_vlan_egress_attr {
> MT7530_VLAN_EGRESS_STACK = 3,
> };
>
> +/* ACL rule pattern */
> +#define ACL_TABLE_EN BIT(19)
> +#define OFST_TP(x) (((x) & 0x7) << 16)
> +#define ACL_SP(x) (((x) & 0xff) << 8)
> +#define WORD_OFST(x) (((x) & 0x7f) << 1)
> +#define CMP_SEL BIT(0)
not used
> +
> +enum mt7530_acl_offset_type {
> + MT7530_ACL_MAC_HEADER,
> + MT7530_ACL_L2_PAYLOAD,
> + MT7530_ACL_IP_HEADER,
> + MT7530_ACL_IP_DATAGRAM,
> + MT7530_ACL_TCP_UDP_HEADER,
> + MT7530_ACL_TCP_UDP_DATAGRAM,
> + MT7530_ACL_IPV6_HEADER,
> +};
not used
> +
> /* Register for address age control */
> #define MT7530_AAC 0xa0
> /* Disable ageing */
> @@ -192,6 +247,7 @@ enum mt7530_stp_state {
>
> /* Register for port control */
> #define MT7530_PCR_P(x) (0x2004 + ((x) * 0x100))
> +#define PORT_ACL_EN BIT(10)
> #define PORT_TX_MIR BIT(9)
> #define PORT_RX_MIR BIT(8)
> #define PORT_VLAN(x) ((x) & 0x3)
> --
> 2.25.1
>
next prev parent reply other threads:[~2021-07-28 18:47 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-28 17:53 [RFC net-next 0/2] mt7530 software fallback bridging fix DENG Qingfang
2021-07-28 17:53 ` [RFC net-next 1/2] net: dsa: tag_mtk: skip address learning on transmit to standalone ports DENG Qingfang
2021-07-28 18:37 ` Vladimir Oltean
2021-07-30 16:24 ` Vladimir Oltean
2021-07-30 17:32 ` DENG Qingfang
2021-07-30 17:39 ` Vladimir Oltean
2021-07-30 17:41 ` Vladimir Oltean
2021-07-30 17:58 ` DENG Qingfang
2021-07-30 19:00 ` DENG Qingfang
2021-07-30 19:07 ` Vladimir Oltean
2021-07-30 19:25 ` DENG Qingfang
2021-07-30 19:30 ` Vladimir Oltean
2021-07-28 17:53 ` [RFC net-next 2/2] net: dsa: mt7530: trap packets from standalone ports to the CPU DENG Qingfang
2021-07-28 18:47 ` Vladimir Oltean [this message]
2021-07-29 15:28 ` Vladimir Oltean
2021-07-29 16:11 ` DENG Qingfang
2021-07-29 16:50 ` Vladimir Oltean
2021-07-30 15:45 ` DENG Qingfang
2021-07-30 15:58 ` DENG Qingfang
2021-07-30 16:18 ` Vladimir Oltean
2021-07-30 17:21 ` DENG Qingfang
2021-07-30 17:35 ` Vladimir Oltean
2021-07-30 17:51 ` DENG Qingfang
2021-07-28 18:08 ` [RFC net-next 0/2] mt7530 software fallback bridging fix Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210728184742.cyoh7ucvxwlbdpnu@skbuf \
--to=olteanv@gmail.com \
--cc=Landen.Chao@mediatek.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=dqfext@gmail.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=sean.wang@mediatek.com \
--cc=vivien.didelot@gmail.com \
--subject='Re: [RFC net-next 2/2] net: dsa: mt7530: trap packets from standalone ports to the CPU' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).