Netdev Archive on
help / color / mirror / Atom feed
From: Hao Chen <>
Cc: Hao Chen <>
Subject: [net-next,v8] net: stmmac: optimize check in ops '.begin'
Date: Tue,  3 Aug 2021 10:37:23 +0800	[thread overview]
Message-ID: <> (raw)

I want to get permanent MAC address when the interface is down. And I think
it is more convenient to get statistics in the down state by 'ethtool -S'.
But current all of the ethool command return -EBUSY.

I don't think we should check that the network interface is up in '.begin',
which will cause that all the ethtool commands can't be used when the
network interface is down. If some ethtool commands can only be used in the
up state, check it in the corresponding ethool OPS function is better.
This is too rude and unreasonable.

Compile-tested on arm64. Tested on an arm64 system with an on-board
STMMAC chip.

Changes v7 ... v8:
- Optimize commit description information, optimization parameters of
  pm_runtime function.

Changes v6 ... v7:
- fix arg type error of 'dev' to 'priv->device'.

Changes v5 ... v6:
- The 4.19.90 kernel not support pm_runtime, so implemente '.begin' and
  '.complete' again. Add return value check of pm_runtime function.

Changes v4 ... v5:
- test the '.begin' will return -13 error on my machine based on 4.19.90
  kernel. The platform driver does not supported pm_runtime. So remove the
  implementation of '.begin' and '.complete'.

Changes v3 ... v4:
- implement '.complete' ethtool OPS.

Changes v2 ... v3:
- add linux/pm_runtime.h head file.

Changes v1 ... v2:
- fix spell error of dev.

Signed-off-by: Hao Chen <>
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c    | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index d0ce608b81c3..8e2ae0ff7f8f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -12,8 +12,9 @@
 #include <linux/ethtool.h>
 #include <linux/interrupt.h>
 #include <linux/mii.h>
-#include <linux/phylink.h>
 #include <linux/net_tstamp.h>
+#include <linux/phylink.h>
+#include <linux/pm_runtime.h>
 #include <asm/io.h>
 #include "stmmac.h"
@@ -410,11 +411,14 @@ static void stmmac_ethtool_setmsglevel(struct net_device *dev, u32 level)
-static int stmmac_check_if_running(struct net_device *dev)
+static int stmmac_ethtool_begin(struct net_device *dev)
-	if (!netif_running(dev))
-		return -EBUSY;
-	return 0;
+	return pm_runtime_resume_and_get(dev->dev);
+static void stmmac_ethtool_complete(struct net_device *dev)
+	pm_runtime_put(dev->dev);
 static int stmmac_ethtool_get_regs_len(struct net_device *dev)
@@ -1073,7 +1077,8 @@ static int stmmac_set_tunable(struct net_device *dev,
 static const struct ethtool_ops stmmac_ethtool_ops = {
 	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
-	.begin = stmmac_check_if_running,
+	.begin = stmmac_ethtool_begin,
+	.complete = stmmac_ethtool_complete,
 	.get_drvinfo = stmmac_ethtool_getdrvinfo,
 	.get_msglevel = stmmac_ethtool_getmsglevel,
 	.set_msglevel = stmmac_ethtool_setmsglevel,

             reply	other threads:[~2021-08-03  2:38 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-03  2:37 Hao Chen [this message]
2021-08-03  2:38 Hao Chen
2021-08-03  6:04 ` Heiner Kallweit
2021-08-03  9:01 ` kernel test robot
2021-08-03 10:33 ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \
    --subject='Re: [net-next,v8] net: stmmac: optimize check in ops '\''.begin'\''' \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).