Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH net 1/1] net: dsa: qca: ar9331: make proper initial port defaults
@ 2021-08-03  6:54 Oleksij Rempel
  2021-08-03  8:14 ` DENG Qingfang
  0 siblings, 1 reply; 3+ messages in thread
From: Oleksij Rempel @ 2021-08-03  6:54 UTC (permalink / raw)
  To: Andrew Lunn, Vivien Didelot, Florian Fainelli, Vladimir Oltean,
	David S. Miller, Jakub Kicinski, Russell King
  Cc: Oleksij Rempel, Pengutronix Kernel Team, netdev, linux-kernel,
	linux-mips

Make sure that all external port are actually isolated from each other,
so no packets are leaked.

Fixes: ec6698c272de ("net: dsa: add support for Atheros AR9331 built-in switch")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/qca/ar9331.c | 99 +++++++++++++++++++++++++++++++++++-
 1 file changed, 98 insertions(+), 1 deletion(-)

diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index 6686192e1883..360417e6cd8c 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -101,6 +101,46 @@
 	 AR9331_SW_PORT_STATUS_RX_FLOW_EN | AR9331_SW_PORT_STATUS_TX_FLOW_EN | \
 	 AR9331_SW_PORT_STATUS_SPEED_M)
 
+#define AR9331_SW_REG_PORT_CTRL(_port)			(0x104 + (_port) * 0x100)
+#define AR9331_SW_PORT_CTRL_ING_MIRROR_EN		BIT(17)
+#define AR9331_SW_PORT_CTRL_EG_MIRROR_EN		BIT(16)
+#define AR9331_SW_PORT_CTRL_DOUBLE_TAG_VLAN		BIT(15)
+#define AR9331_SW_PORT_CTRL_LEARN_EN			BIT(14)
+#define AR9331_SW_PORT_CTRL_SINGLE_VLAN_EN		BIT(13)
+#define AR9331_SW_PORT_CTRL_MAC_LOOP_BACK		BIT(12)
+#define AR9331_SW_PORT_CTRL_HEAD_EN			BIT(11)
+#define AR9331_SW_PORT_CTRL_IGMP_MLD_EN			BIT(10)
+#define AR9331_SW_PORT_CTRL_EG_VLAN_MODE		GENMASK(9, 8)
+#define AR9331_SW_PORT_CTRL_EG_VLAN_MODE_KEEP		0
+#define AR9331_SW_PORT_CTRL_EG_VLAN_MODE_STRIP		1
+#define AR9331_SW_PORT_CTRL_EG_VLAN_MODE_ADD		2
+#define AR9331_SW_PORT_CTRL_EG_VLAN_MODE_DOUBLE		3
+#define AR9331_SW_PORT_CTRL_LEARN_ONE_LOCK		BIT(7)
+#define AR9331_SW_PORT_CTRL_PORT_LOCK_EN		BIT(6)
+#define AR9331_SW_PORT_CTRL_LOCK_DROP_EN		BIT(5)
+#define AR9331_SW_PORT_CTRL_PORT_STATE			GENMASK(2, 0)
+#define AR9331_SW_PORT_CTRL_PORT_STATE_DISABLED		0
+#define AR9331_SW_PORT_CTRL_PORT_STATE_BLOCKING		1
+#define AR9331_SW_PORT_CTRL_PORT_STATE_LISTENING	2
+#define AR9331_SW_PORT_CTRL_PORT_STATE_LEARNING		3
+#define AR9331_SW_PORT_CTRL_PORT_STATE_FORWARD		4
+
+#define AR9331_SW_REG_PORT_VLAN(_port)			(0x108 + (_port) * 0x100)
+#define AR9331_SW_PORT_VLAN_8021Q_MODE			GENMASK(31, 30)
+#define AR9331_SW_8021Q_MODE_SECURE			3
+#define AR9331_SW_8021Q_MODE_CHECK			2
+#define AR9331_SW_8021Q_MODE_FALLBACK			1
+#define AR9331_SW_8021Q_MODE_NONE			0
+#define AR9331_SW_PORT_VLAN_ING_PORT_PRI		GENMASK(29, 27)
+#define AR9331_SW_PORT_VLAN_FORCE_PORT_VLAN_EN		BIT(26)
+#define AR9331_SW_PORT_VLAN_PORT_VID_MEMBER		GENMASK(25, 16)
+#define AR9331_SW_PORT_VLAN_ARP_LEAKY_EN		BIT(15)
+#define AR9331_SW_PORT_VLAN_UNI_LEAKY_EN		BIT(14)
+#define AR9331_SW_PORT_VLAN_MULTI_LEAKY_EN		BIT(13)
+#define AR9331_SW_PORT_VLAN_FORCE_DEFALUT_VID_EN	BIT(12)
+#define AR9331_SW_PORT_VLAN_PORT_VID			GENMASK(11, 0)
+#define AR9331_SW_PORT_VLAN_PORT_VID_DEF		1
+
 /* MIB registers */
 #define AR9331_MIB_COUNTER(x)			(0x20000 + ((x) * 0x100))
 
@@ -371,12 +411,63 @@ static int ar9331_sw_mbus_init(struct ar9331_sw_priv *priv)
 	return 0;
 }
 
-static int ar9331_sw_setup(struct dsa_switch *ds)
+static int ar9331_sw_setup_port(struct dsa_switch *ds, int port)
 {
 	struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
 	struct regmap *regmap = priv->regmap;
+	u32 port_mask, port_ctrl, val;
 	int ret;
 
+	/* Generate default port settings */
+	port_ctrl = FIELD_PREP(AR9331_SW_PORT_CTRL_PORT_STATE,
+			       AR9331_SW_PORT_CTRL_PORT_STATE_DISABLED);
+
+	if (dsa_is_cpu_port(ds, port)) {
+		/* CPU port should be allowed to communicate with all user
+		 * ports.
+		 */
+		port_mask = dsa_user_ports(ds);
+		/* Enable Atheros header on CPU port. This will allow us
+		 * communicate with each port separately
+		 */
+		port_ctrl |= AR9331_SW_PORT_CTRL_HEAD_EN;
+	} else if (dsa_is_user_port(ds, port)) {
+		/* User ports should communicate only with the CPU port.
+		 */
+		port_mask = BIT(dsa_to_port(ds, port)->cpu_dp->index);
+		port_ctrl |= AR9331_SW_PORT_CTRL_LEARN_EN;
+	} else {
+		/* Other ports do not need to communicate at all */
+		port_mask = 0;
+	}
+
+	val = FIELD_PREP(AR9331_SW_PORT_VLAN_8021Q_MODE,
+			 AR9331_SW_8021Q_MODE_NONE) |
+		FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, port_mask) |
+		FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID,
+			   AR9331_SW_PORT_VLAN_PORT_VID_DEF);
+
+	ret = regmap_write(regmap, AR9331_SW_REG_PORT_VLAN(port), val);
+	if (ret)
+		goto error;
+
+	ret = regmap_write(regmap, AR9331_SW_REG_PORT_CTRL(port), port_ctrl);
+	if (ret)
+		goto error;
+
+	return 0;
+error:
+	dev_err(priv->dev, "%s: error: %i\n", __func__, ret);
+
+	return ret;
+}
+
+static int ar9331_sw_setup(struct dsa_switch *ds)
+{
+	struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+	struct regmap *regmap = priv->regmap;
+	int ret, i;
+
 	ret = ar9331_sw_reset(priv);
 	if (ret)
 		return ret;
@@ -402,6 +493,12 @@ static int ar9331_sw_setup(struct dsa_switch *ds)
 	if (ret)
 		goto error;
 
+	for (i = 0; i < ds->num_ports; i++) {
+		ret = ar9331_sw_setup_port(ds, i);
+		if (ret)
+			goto error;
+	}
+
 	ds->configure_vlan_while_not_filtering = false;
 
 	return 0;
-- 
2.30.2


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH net 1/1] net: dsa: qca: ar9331: make proper initial port defaults
  2021-08-03  6:54 [PATCH net 1/1] net: dsa: qca: ar9331: make proper initial port defaults Oleksij Rempel
@ 2021-08-03  8:14 ` DENG Qingfang
  2021-08-03  8:44   ` Oleksij Rempel
  0 siblings, 1 reply; 3+ messages in thread
From: DENG Qingfang @ 2021-08-03  8:14 UTC (permalink / raw)
  To: Oleksij Rempel
  Cc: Andrew Lunn, Vivien Didelot, Florian Fainelli, Vladimir Oltean,
	David S. Miller, Jakub Kicinski, Russell King,
	Pengutronix Kernel Team, netdev, linux-kernel, linux-mips

On Tue, Aug 03, 2021 at 08:54:24AM +0200, Oleksij Rempel wrote:
> +	if (dsa_is_cpu_port(ds, port)) {
> +		/* CPU port should be allowed to communicate with all user
> +		 * ports.
> +		 */
> +		port_mask = dsa_user_ports(ds);
> +		/* Enable Atheros header on CPU port. This will allow us
> +		 * communicate with each port separately
> +		 */
> +		port_ctrl |= AR9331_SW_PORT_CTRL_HEAD_EN;
> +	} else if (dsa_is_user_port(ds, port)) {
> +		/* User ports should communicate only with the CPU port.
> +		 */
> +		port_mask = BIT(dsa_to_port(ds, port)->cpu_dp->index);
> +		port_ctrl |= AR9331_SW_PORT_CTRL_LEARN_EN;

All user ports should start with address learning disabled.
To toggle it, implement .port_pre_bridge_flags and .port_bridge_flags.

> +	} else {
> +		/* Other ports do not need to communicate at all */
> +		port_mask = 0;
> +	}
> +

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [PATCH net 1/1] net: dsa: qca: ar9331: make proper initial port defaults
  2021-08-03  8:14 ` DENG Qingfang
@ 2021-08-03  8:44   ` Oleksij Rempel
  0 siblings, 0 replies; 3+ messages in thread
From: Oleksij Rempel @ 2021-08-03  8:44 UTC (permalink / raw)
  To: DENG Qingfang
  Cc: Andrew Lunn, Florian Fainelli, linux-mips, netdev, Russell King,
	David S. Miller, Pengutronix Kernel Team, Jakub Kicinski,
	Vladimir Oltean, Vivien Didelot, linux-kernel

On Tue, Aug 03, 2021 at 04:14:35PM +0800, DENG Qingfang wrote:
> On Tue, Aug 03, 2021 at 08:54:24AM +0200, Oleksij Rempel wrote:
> > +	if (dsa_is_cpu_port(ds, port)) {
> > +		/* CPU port should be allowed to communicate with all user
> > +		 * ports.
> > +		 */
> > +		port_mask = dsa_user_ports(ds);
> > +		/* Enable Atheros header on CPU port. This will allow us
> > +		 * communicate with each port separately
> > +		 */
> > +		port_ctrl |= AR9331_SW_PORT_CTRL_HEAD_EN;
> > +	} else if (dsa_is_user_port(ds, port)) {
> > +		/* User ports should communicate only with the CPU port.
> > +		 */
> > +		port_mask = BIT(dsa_to_port(ds, port)->cpu_dp->index);
> > +		port_ctrl |= AR9331_SW_PORT_CTRL_LEARN_EN;
> 
> All user ports should start with address learning disabled.
> To toggle it, implement .port_pre_bridge_flags and .port_bridge_flags.

Ok, thx! Will move it to the separate patch

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-08-03  8:44 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-03  6:54 [PATCH net 1/1] net: dsa: qca: ar9331: make proper initial port defaults Oleksij Rempel
2021-08-03  8:14 ` DENG Qingfang
2021-08-03  8:44   ` Oleksij Rempel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).