Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jakub Kicinski <kuba@kernel.org>
To: Jonathan Lemon <jonathan.lemon@gmail.com>
Cc: davem@davemloft.net, richardcochran@gmail.com,
netdev@vger.kernel.org, kernel-team@fb.com, abyagowi@fb.com
Subject: Re: [PATCH net-next 09/11] ptp: ocp: Add debugfs entry for timecard
Date: Wed, 1 Sep 2021 17:06:41 -0700 [thread overview]
Message-ID: <20210901170641.0e9c9481@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com> (raw)
In-Reply-To: <20210830235236.309993-10-jonathan.lemon@gmail.com>
On Mon, 30 Aug 2021 16:52:34 -0700 Jonathan Lemon wrote:
> Provide a view into the timecard internals for debugging.
>
> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
> +#ifdef CONFIG_DEBUG_FS
> +#define gpio_map(gpio, bit, pri, sec, def) ({ \
> + char *_ans; \
> + if (gpio & (1 << bit)) \
> + _ans = pri; \
> + else if (gpio & (1 << (bit + 16))) \
> + _ans = sec; \
> + else \
> + _ans = def; \
> + _ans; \
> +})
> +
> +#define gpio_multi_map(buf, gpio, bit, pri, sec, def) ({ \
> + char *_ans; \
> + _ans = buf; \
> + strcpy(buf, def); \
> + if (gpio & (1 << (bit + 16))) \
> + _ans += sprintf(_ans, "%s ", pri); \
> + if (gpio & (1 << bit)) \
> + _ans += sprintf(_ans, "%s ", sec); \
> +})
These can't be static inlines?
> +static int
> +ptp_ocp_summary_show(struct seq_file *s, void *data)
> +{
> + struct device *dev = s->private;
> + struct ts_reg __iomem *ts_reg;
> + u32 sma_in, sma_out, val;
> + struct timespec64 ts;
> + struct ptp_ocp *bp;
> + char *buf, *src;
> + bool on;
> +
> + buf = (char *)__get_free_page(GFP_KERNEL);
> + if (!buf)
> + return -ENOMEM;
> +
> + sma1_out_show(dev, NULL, buf);
> + seq_printf(s, " sma1: out from %s", buf);
> +
> + sma2_out_show(dev, NULL, buf);
> + seq_printf(s, " sma2: out from %s", buf);
> +
> + sma3_in_show(dev, NULL, buf);
> + seq_printf(s, " sma3: input to %s", buf);
> +
> + sma4_in_show(dev, NULL, buf);
> + seq_printf(s, " sma4: input to %s", buf);
Why duplicate the data already available via sysfs?
> +static int
> +ptp_ocp_debugfs_add_device(struct ptp_ocp *bp)
> +{
> + struct dentry *d;
> +
> + d = debugfs_create_dir(dev_name(&bp->dev), ptp_ocp_debugfs_root);
> + if (IS_ERR(d))
> + return PTR_ERR(d);
Driver's are not supposed to depend on debugfs, you should be able to
carry on and all debugfs functions you pass an error pointer as a
parent will just return the same error right back.
> + bp->debug_root = d;
> +
> + d = debugfs_create_file("summary", 0444, bp->debug_root,
> + &bp->dev, &ptp_ocp_summary_fops);
> + if (IS_ERR(d))
> + goto fail;
> +
> + return 0;
> +
> +fail:
> + debugfs_remove_recursive(bp->debug_root);
> + bp->debug_root = NULL;
> +
> + return PTR_ERR(d);
> +}
> +
> +static void
> +ptp_ocp_debugfs_remove_device(struct ptp_ocp *bp)
> +{
> + debugfs_remove_recursive(bp->debug_root);
> +}
> +
> +static int
> +ptp_ocp_debugfs_init(void)
> +{
> + struct dentry *d;
> +
> + d = debugfs_create_dir("timecard", NULL);
> + if (IS_ERR(d))
> + return PTR_ERR(d);
> +
> + ptp_ocp_debugfs_root = d;
> +
> + return 0;
> +}
> +
> +static void
> +ptp_ocp_debugfs_fini(void)
> +{
> + debugfs_remove_recursive(ptp_ocp_debugfs_root);
> +}
> +#else
> +#define ptp_ocp_debugfs_init() 0
> +#define ptp_ocp_debugfs_fini()
> +#define ptp_ocp_debugfs_add_device(bp) 0
> +#define ptp_ocp_debugfs_remove_device(bp)
> +#endif
This should not be necessary. Compiler should remove all those
functions as dead code when debugfs is not compiled in.
> static void
> ptp_ocp_dev_release(struct device *dev)
> {
next prev parent reply other threads:[~2021-09-02 0:06 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-30 23:52 [PATCH net-next 00/11] ocp timecard updates Jonathan Lemon
2021-08-30 23:52 ` [PATCH net-next 01/11] ptp: ocp: parameterize the i2c driver used Jonathan Lemon
2021-08-30 23:52 ` [PATCH net-next 02/11] ptp: ocp: Parameterize the TOD information display Jonathan Lemon
2021-08-30 23:52 ` [PATCH net-next 03/11] ptp: ocp: Skip I2C flash read when there is no controller Jonathan Lemon
2021-08-30 23:52 ` [PATCH net-next 04/11] ptp: ocp: Skip resources with out of range irqs Jonathan Lemon
2021-08-30 23:52 ` [PATCH net-next 05/11] ptp: ocp: Add third timestamper Jonathan Lemon
2021-08-30 23:52 ` [PATCH net-next 06/11] ptp: ocp: Add SMA selector and controls Jonathan Lemon
2021-09-01 23:56 ` Jakub Kicinski
2021-09-02 16:55 ` Jonathan Lemon
2021-08-30 23:52 ` [PATCH net-next 07/11] ptp: ocp: Add IRIG-B and DCF blocks Jonathan Lemon
2021-08-30 23:52 ` [PATCH net-next 08/11] ptp: ocp: Add sysfs attribute utc_tai_offset Jonathan Lemon
2021-09-01 23:56 ` Jakub Kicinski
2021-09-02 16:57 ` Jonathan Lemon
2021-08-30 23:52 ` [PATCH net-next 09/11] ptp: ocp: Add debugfs entry for timecard Jonathan Lemon
2021-09-02 0:06 ` Jakub Kicinski [this message]
2021-09-02 17:00 ` Jonathan Lemon
2021-08-30 23:52 ` [PATCH net-next 10/11] ptp: ocp: Add IRIG-B output mode control Jonathan Lemon
2021-09-02 0:07 ` Jakub Kicinski
2021-09-02 17:02 ` Jonathan Lemon
2021-09-02 22:41 ` Jakub Kicinski
2021-08-30 23:52 ` [PATCH net-next 11/11] docs: ABI: Add sysfs documentation for timecard Jonathan Lemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210901170641.0e9c9481@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com \
--to=kuba@kernel.org \
--cc=abyagowi@fb.com \
--cc=davem@davemloft.net \
--cc=jonathan.lemon@gmail.com \
--cc=kernel-team@fb.com \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
--subject='Re: [PATCH net-next 09/11] ptp: ocp: Add debugfs entry for timecard' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).