Re: [PATCH net-next] net: dpaa2-mac: add support for more ethtool 10G link modes

[Ioana Ciornei <ciorneiioana@gmail.com>]

On Fri, Sep 03, 2021 at 11:33:58AM +0100, Russell King (Oracle) wrote:
> On Mon, Aug 16, 2021 at 05:47:52PM +0300, Ioana Ciornei wrote:
> > On Tue, Jul 20, 2021 at 03:11:34PM +0100, Russell King (Oracle) wrote:
> > > On Tue, Jul 20, 2021 at 03:51:35PM +0200, Andrew Lunn wrote:
> > > > On Tue, Jul 20, 2021 at 10:57:43AM +0100, Russell King wrote:
> > > > > Phylink documentation says:
> > > > >   Note that the PHY may be able to transform from one connection
> > > > >   technology to another, so, eg, don't clear 1000BaseX just
> > > > >   because the MAC is unable to BaseX mode. This is more about
> > > > >   clearing unsupported speeds and duplex settings. The port modes
> > > > >   should not be cleared; phylink_set_port_modes() will help with this.
> > > > > 
> > > > > So add the missing 10G modes.
> > > > 
> > > > Hi Russell
> > > > 
> > > > Would a phylink_set_10g(mask) helper make sense? As you say, it is
> > > > about the speed, not the individual modes.
> > > 
> > > Yes, good point, and that will probably help avoid this in the future.
> > > We can't do that for things like e.g. SGMII though, because 1000/half
> > > isn't universally supported.
> > > 
> > > Shall we get this patch merged anyway and then clean it up - as such
> > > a change will need to cover multiple drivers anyway?
> > > 
> > 
> > This didn't get merged unfortunately.
> > 
> > Could you please resend it? Alternatively, I can take a look into adding
> > that phylink_set_10g() helper if that is what's keeping it from being
> > merged.
> 
> It looks like the original patch didn't appear in patchwork for some
> reason - at least google can find it in lore's netdev archives, but
> not in patchwork. I can only put this down to some kernel.org
> unreliability - we've seen this unreliability in the past with netdev,
> and it seems to be an ongoing issue.
> 

Yes, it cannot be found though google but the patch appears in
patchwork, it was tagged with 'Changes requested'.
https://patchwork.kernel.org/project/netdevbpf/patch/E1m5mVT-00032g-Km@rmk-PC.armlinux.org.uk/


> It's now too late to re-send for this merge window - net-next is
> currently closed. Whether I remember in a fortnight or so time when
> net-next re-opens is another problem.
> 
> And yes, I also have the phylink_set_10g() patches in my tree, which
> was waiting for this patch to have been merged.
> 

Ok, thanks!

Ioana