Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Casey Schaufler <casey@schaufler-ca.com>
To: Paul Moore <paul@paul-moore.com>
Cc: casey.schaufler@intel.com, James Morris <jmorris@namei.org>,
	linux-security-module@vger.kernel.org, selinux@vger.kernel.org,
	linux-audit@redhat.com, keescook@chromium.org,
	john.johansen@canonical.com, penguin-kernel@i-love.sakura.ne.jp,
	Stephen Smalley <sds@tycho.nsa.gov>,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	Casey Schaufler <casey@schaufler-ca.com>
Subject: Re: [PATCH v28 22/25] Audit: Add record for multiple process LSM attributes
Date: Fri, 13 Aug 2021 14:47:43 -0700	[thread overview]
Message-ID: <3ebad75f-1887-bb31-db23-353bfc9c0b4a@schaufler-ca.com> (raw)
In-Reply-To: <CAHC9VhQxG+LXxgtczhH=yVdeh9mTO+Xhe=TeQ4eihjtkQ2=3Fw@mail.gmail.com>

On 8/13/2021 1:43 PM, Paul Moore wrote:
> On Fri, Aug 13, 2021 at 2:48 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>> On 8/13/2021 8:31 AM, Paul Moore wrote:
>>> On Thu, Aug 12, 2021 at 6:38 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>>>> On 8/12/2021 1:59 PM, Paul Moore wrote:
>>>>> On Wed, Jul 21, 2021 at 9:12 PM Casey Schaufler <casey@schaufler-ca.com> wrote:
>>>>>> Create a new audit record type to contain the subject information
>>>>>> when there are multiple security modules that require such data.
>>> ...
>>>
>>>>> The local
>>>>> audit context is a hack that is made necessary by the fact that we
>>>>> have to audit things which happen outside the scope of an executing
>>>>> task, e.g. the netfilter audit hooks, it should *never* be used when
>>>>> there is a valid task_struct.
>>>> In the existing audit code a "current context" is only needed for
>>>> syscall events, so that's the only case where it's allocated. Would
>>>> you suggest that I track down the non-syscall events that include
>>>> subj= fields and add allocate a "current context" for them? I looked
>>>> into doing that, and it wouldn't be simple.
>>> This is why the "local context" was created.  Prior to these stacking
>>> additions, and the audit container ID work, we never needed to group
>>> multiple audit records outside of a syscall context into a single
>>> audit event so passing a NULL context into audit_log_start() was
>>> reasonable.  The local context was designed as a way to generate a
>>> context for use in a local function scope to group multiple records,
>>> however, for reasons I'll get to below I'm now wondering if the local
>>> context approach is really workable ...
>> I haven't found a place where it didn't work. What is the concern?
> The concern is that use of a local context can destroy any hopes of
> linking with other related records, e.g. SYSCALL and PATH records, to
> form a single cohesive event.  If the current task_struct is valid for
> a given function invocation then we *really* should be using current's
> audit_context.
>
> However, based on our discussion here it would seem that we may have
> some issues where current->audit_context is not being managed
> correctly.  I'm not surprised, but I will admit to being disappointed.

I'd believe that with syscall audit being a special case for other reasons
the multiple record situation got taken care of on a case-by-case basis
and no one really paid much attention to generality. It's understandable.

>>> What does your audit config look like?  Both the kernel command line
>>> and the output of 'auditctl -l' would be helpful.
>> On the fedora system:
>>
>> BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.14.0-rc5stack+
>> root=/dev/mapper/fedora-root ro resume=/dev/mapper/fedora-swap
>> rd.lvm.lv=fedora/root rd.lvm.lv=fedora/swap lsm.debug
>>
>> -a always,exit -F arch=b64 -S bpf -F key=testsuite-1628714321-EtlWIphW
>>
>> On the Ubuntu system:
>>
>> BOOT_IMAGE=/boot/vmlinuz-5.14.0-rc1stack+
>> root=UUID=39c25777-d413-4c2e-948c-dfa2bf259049 ro lsm.debug
>>
>> No rules
> The Fedora system looks to have some audit-testsuite leftovers, but
> that shouldn't have an impact on what we are discussing; in both cases
> I would expect current->audit_context to be allocated and non-NULL.

As would I.


>>> I'm beginning to suspect that you have the default
>>> we-build-audit-into-the-kernel-because-product-management-said-we-have-to-but-we-don't-actually-enable-it-at-runtime
>>> audit configuration that is de rigueur for many distros these days.
>> Yes, but I've also fiddled about with it so as to get better event coverage.
>> I've run the audit-testsuite, which has got to fiddle about with the audit
>> configuration.
> Yes, it looks like my hunch was wrong.
>
>>> If that is the case, there are many cases where you would not see a
>>> NULL current->audit_context simply because the config never allocated
>>> one, see kernel/auditsc.c:audit_alloc().
>> I assume you mean that I *would* see a NULL current->audit_context
>> in the "event not enabled" case.
> Yep, typo.
>
>>> Regardless, assuming that is the case we probably need to find an
>>> alternative to the local context approach as it currently works.  For
>>> reasons we already talked about, we don't want to use a local
>>> audit_context if there is the possibility for a proper
>>> current->audit_context, but we need to do *something* so that we can
>>> group these multiple events into a single record.
>> I tried a couple things, but neither was satisfactory.
>>
>>> Since this is just occurring to me now I need a bit more time to think
>>> on possible solutions - all good ideas are welcome - but the first
>>> thing that pops into my head is that we need to augment
>>> audit_log_end() to potentially generated additional, associated
>>> records similar to what we do on syscall exit in audit_log_exit().
>> I looked into that. You need a place to save the timestamp
>> that doesn't disappear. That's the role the audit_context plays
>> now.
> Yes, I've spent a few hours staring at the poorly planned struct that
> is audit_context ;)
>
> Regardless, the obvious place for such a thing is audit_buffer; we can
> stash whatever we need in there.

I had considered doing that, but was afraid that moving the timestamp
out of the audit_context might have dire consequences.


>>>  Of
>>> course the audit_log_end() changes would be much more limited than
>>> audit_log_exit(), just the LSM subject and audit container ID info,
>>> and even then we might want to limit that to cases where the ab->ctx
>>> value is NULL and let audit_log_exit() handle it otherwise.  We may
>>> need to store the event type in the audit_buffer during
>>> audit_log_start() so that we can later use that in audit_log_end() to
>>> determine what additional records are needed.
>>>
>>> Regardless, let's figure out why all your current->audit_context
>>> values are NULL
>> That's what's maddening, and why I implemented audit_alloc_for_lsm().
>> They aren't all NULL. Sometimes current->audit_context is NULL,
>> sometimes it isn't, for the same event. I thought it might be a
>> question of the netlink interface being treated specially, but
>> that doesn't explain all the cases.
> Your netlink changes are exactly what made me think, "this is
> obviously wrong", but now I'm wondering if a previously held
> assumption of "current is valid and points to the calling process" in
> the case of the kernel servicing netlink messages sent from userspace.

If that's the case the subject data in the audit record is going
to be bogus. From what I've seen that data appears to be correct.

> Or rather, perhaps that assumption is still true but something is
> causing current->audit_context to be NULL in that case.

I can imagine someone deciding not to set up audit_context in
situations like netlink because they knew that nothing following
that would be a syscall event. I've been looking into the audit
userspace and there are assumptions like that all over the place.

> Friday the 13th indeed.

I've been banging my head against this for a couple months.
My biggest fear is that I may have learned enough about the
audit system to make useful contributions. 




  reply	other threads:[~2021-08-13 21:47 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20210722004758.12371-1-casey@schaufler-ca.com>
2021-07-22  0:47 ` [PATCH v28 07/25] LSM: Use lsmblob in security_secctx_to_secid Casey Schaufler
2021-07-22  0:47 ` [PATCH v28 08/25] LSM: Use lsmblob in security_secid_to_secctx Casey Schaufler
2021-07-22  0:47 ` [PATCH v28 10/25] LSM: Use lsmblob in security_task_getsecid Casey Schaufler
2021-07-22  0:47 ` [PATCH v28 15/25] LSM: Ensure the correct LSM context releaser Casey Schaufler
2021-07-22  0:47 ` [PATCH v28 16/25] LSM: Use lsmcontext in security_secid_to_secctx Casey Schaufler
2021-07-22  0:47 ` [PATCH v28 18/25] LSM: security_secid_to_secctx in netlink netfilter Casey Schaufler
2021-07-22  0:47 ` [PATCH v28 19/25] NET: Store LSM netlabel data in a lsmblob Casey Schaufler
2021-07-22  0:47 ` [PATCH v28 22/25] Audit: Add record for multiple process LSM attributes Casey Schaufler
2021-08-12 20:59   ` Paul Moore
2021-08-12 22:38     ` Casey Schaufler
2021-08-13 15:31       ` Paul Moore
2021-08-13 18:48         ` Casey Schaufler
2021-08-13 20:43           ` Paul Moore
2021-08-13 21:47             ` Casey Schaufler [this message]
2021-08-16 18:57               ` Paul Moore

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3ebad75f-1887-bb31-db23-353bfc9c0b4a@schaufler-ca.com \
    --to=casey@schaufler-ca.com \
    --cc=casey.schaufler@intel.com \
    --cc=jmorris@namei.org \
    --cc=john.johansen@canonical.com \
    --cc=keescook@chromium.org \
    --cc=linux-audit@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-security-module@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=paul@paul-moore.com \
    --cc=penguin-kernel@i-love.sakura.ne.jp \
    --cc=sds@tycho.nsa.gov \
    --cc=selinux@vger.kernel.org \
    --subject='Re: [PATCH v28 22/25] Audit: Add record for multiple process LSM attributes' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).