Netdev Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH net-next 1/4] igb: move SDP config initialization to separate function
@ 2021-07-19  6:25 Ruud Bos
  0 siblings, 0 replies; 3+ messages in thread
From: Ruud Bos @ 2021-07-19  6:25 UTC (permalink / raw)
  To: netdev

Allow reuse of SDP config struct initialization by moving it to a
separate function.

Signed-off-by: Ruud Bos <ruud.bos@hbkworld.com>
---
 drivers/net/ethernet/intel/igb/igb_ptp.c | 27 +++++++++++++++++-------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_ptp.c b/drivers/net/ethernet/intel/igb/igb_ptp.c
index 0011b15e678c..c78d0c2a5341 100644
--- a/drivers/net/ethernet/intel/igb/igb_ptp.c
+++ b/drivers/net/ethernet/intel/igb/igb_ptp.c
@@ -69,6 +69,7 @@
 #define IGB_NBITS_82580                        40

 static void igb_ptp_tx_hwtstamp(struct igb_adapter *adapter);
+static void igb_ptp_sdp_init(struct igb_adapter *adapter);

 /* SYSTIM read access for the 82576 */
 static u64 igb_ptp_read_82576(const struct cyclecounter *cc)
@@ -1192,7 +1193,6 @@ void igb_ptp_init(struct igb_adapter *adapter)
 {
        struct e1000_hw *hw = &adapter->hw;
        struct net_device *netdev = adapter->netdev;
-       int i;

        switch (hw->mac.type) {
        case e1000_82576:
@@ -1233,13 +1233,7 @@ void igb_ptp_init(struct igb_adapter *adapter)
                break;
        case e1000_i210:
        case e1000_i211:
-               for (i = 0; i < IGB_N_SDP; i++) {
-                       struct ptp_pin_desc *ppd = &adapter->sdp_config[i];
-
-                       snprintf(ppd->name, sizeof(ppd->name), "SDP%d", i);
-                       ppd->index = i;
-                       ppd->func = PTP_PF_NONE;
-               }
+               igb_ptp_sdp_init(adapter);
                snprintf(adapter->ptp_caps.name, 16, "%pm", netdev->dev_addr);
                adapter->ptp_caps.owner = THIS_MODULE;
                adapter->ptp_caps.max_adj = 62499999;
@@ -1284,6 +1278,23 @@ void igb_ptp_init(struct igb_adapter *adapter)
        }
 }

+/**
+ * igb_ptp_sdp_init - utility function which inits the SDP config structs
+ * @adapter: Board private structure.
+ **/
+void igb_ptp_sdp_init(struct igb_adapter *adapter)
+{
+       int i;
+
+       for (i = 0; i < IGB_N_SDP; i++) {
+               struct ptp_pin_desc *ppd = &adapter->sdp_config[i];
+
+               snprintf(ppd->name, sizeof(ppd->name), "SDP%d", i);
+               ppd->index = i;
+               ppd->func = PTP_PF_NONE;
+       }
+}
+
 /**
  * igb_ptp_suspend - Disable PTP work items and prepare for suspend
  * @adapter: Board private structure
--
2.30.2


UNRESTRICTED
HBK Benelux B.V., Schutweg 15a, NL-5145 NP Waalwijk, The Netherlands www.hbkworld.com Registered as B.V. (Dutch limited liability company) in the Dutch commercial register 08183075 0000 Company domiciled in Waalwijk Managing Directors : Alexandra Hellemans, Jens Wiegand, Jorn Bagijn The information in this email is confidential. It is intended solely for the addressee. If you are not the intended recipient, please let me know and delete this email.

^ permalink raw reply	[flat|nested] 3+ messages in thread
* [PATCH net-next 0/4] igb: support PEROUT and EXTTS PTP pin functions on 82580/i354/i350
@ 2021-10-06 12:58 Ruud Bos
  2021-10-06 12:58 ` [PATCH net-next 1/4] igb: move SDP config initialization to separate function Ruud Bos
  0 siblings, 1 reply; 3+ messages in thread
From: Ruud Bos @ 2021-10-06 12:58 UTC (permalink / raw)
  To: netdev
  Cc: richardcochran, davem, kuba, jesse.brandeburg, anthony.l.nguyen,
	Ruud Bos

The igb driver provides support for PEROUT and EXTTS pin functions that
allow adapter external use of timing signals. At Hottinger Bruel & Kjaer we
are using the PEROUT function to feed a PTP corrected 1pps signal into an
FPGA as cross system synchronized time source.

Support for the PEROUT and EXTTS SDP functions is currently limited to
i210/i211 based adapters. This patch series enables these functions also
for 82580/i354/i350 based ones. Because the time registers of these
adapters do not have the nice split in second rollovers as the i210 has,
the implementation is slightly more complex compared to the i210
implementation.

The PEROUT function has been successfully tested on an i350 based ethernet
adapter. Using the following user space code excerpt, the driver outputs a
PTP corrected 1pps signal on the SDP0 pin of an i350:

    struct ptp_pin_desc desc;
    memset(&desc, 0, sizeof(desc));
    desc.index = 0;
    desc.func = PTP_PF_PEROUT;
    desc.chan = 0;
    if (ioctl(fd, PTP_PIN_SETFUNC, &desc) == 0) {
        struct timespec ts;
        if (clock_gettime(clkid, &ts) == 0) {
            struct ptp_perout_request rq;
            memset(&rq, 0, sizeof(rq));
            rq.index = 0;
            rq.start.sec = ts.tv_sec + 1;
            rq.start.nsec = 500000000;
            rq.period.sec  = 1;
            rq.period.nsec = 0;
            if (ioctl(fd, PTP_PEROUT_REQUEST, &rq) == 0) {
                /* 1pps signal is now available on SDP0 */
            }
        }
    }

The added EXTTS function has not been tested. However, looking at the data
sheets, the layout of the registers involved match the i210 exactly except
for the time registers mentioned before. Hence the almost identical
implementation.

Ruud Bos (4):
  igb: move SDP config initialization to separate function
  igb: move PEROUT and EXTTS isr logic to separate functions
  igb: support PEROUT on 82580/i354/i350
  support EXTTS on 82580/i354/i350

 drivers/net/ethernet/intel/igb/igb_main.c | 141 ++++++++++++-----
 drivers/net/ethernet/intel/igb/igb_ptp.c  | 183 ++++++++++++++++++++--
 2 files changed, 279 insertions(+), 45 deletions(-)

-- 
2.30.2


^ permalink raw reply	[flat|nested] 3+ messages in thread
* [PATCH net-next 0/4][pull request] 1GbE Intel Wired LAN Driver Updates 2021-12-29
@ 2021-12-29 18:40 Tony Nguyen
  2021-12-29 18:40 ` [PATCH net-next 1/4] igb: move SDP config initialization to separate function Tony Nguyen
  0 siblings, 1 reply; 3+ messages in thread
From: Tony Nguyen @ 2021-12-29 18:40 UTC (permalink / raw)
  To: davem, kuba; +Cc: Tony Nguyen, netdev, kernel.hbk, richardcochran

Ruud Bos says:

The igb driver provides support for PEROUT and EXTTS pin functions that
allow adapter external use of timing signals. At Hottinger Bruel & Kjaer we
are using the PEROUT function to feed a PTP corrected 1pps signal into an
FPGA as cross system synchronized time source.

Support for the PEROUT and EXTTS SDP functions is currently limited to
i210/i211 based adapters. This patch series enables these functions also
for 82580/i354/i350 based ones. Because the time registers of these
adapters do not have the nice split in second rollovers as the i210 has,
the implementation is slightly more complex compared to the i210
implementation.

The PEROUT function has been successfully tested on an i350 based ethernet
adapter. Using the following user space code excerpt, the driver outputs a
PTP corrected 1pps signal on the SDP0 pin of an i350:

    struct ptp_pin_desc desc;
    memset(&desc, 0, sizeof(desc));
    desc.index = 0;
    desc.func = PTP_PF_PEROUT;
    desc.chan = 0;
    if (ioctl(fd, PTP_PIN_SETFUNC, &desc) == 0) {
        struct timespec ts;
        if (clock_gettime(clkid, &ts) == 0) {
            struct ptp_perout_request rq;
            memset(&rq, 0, sizeof(rq));
            rq.index = 0;
            rq.start.sec = ts.tv_sec + 1;
            rq.start.nsec = 500000000;
            rq.period.sec  = 1;
            rq.period.nsec = 0;
            if (ioctl(fd, PTP_PEROUT_REQUEST, &rq) == 0) {
                /* 1pps signal is now available on SDP0 */
            }
        }
    }

The added EXTTS function has not been tested. However, looking at the data
sheets, the layout of the registers involved match the i210 exactly except
for the time registers mentioned before. Hence the almost identical
implementation.

Acked-by: Richard Cochran <richardcochran@gmail.com>
---
Note: I made changes to fix RCT and checkpatch messages regarding
unnecessary parenthesis.

The following are changes since commit 9ed319e411915e882bb4ed99be3ae78667a70022:
  of: net: support NVMEM cells with MAC in text format
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 1GbE

Ruud Bos (4):
  igb: move SDP config initialization to separate function
  igb: move PEROUT and EXTTS isr logic to separate functions
  igb: support PEROUT on 82580/i354/i350
  igb: support EXTTS on 82580/i354/i350

 drivers/net/ethernet/intel/igb/igb_main.c | 148 +++++++++++++----
 drivers/net/ethernet/intel/igb/igb_ptp.c  | 188 ++++++++++++++++++++--
 2 files changed, 291 insertions(+), 45 deletions(-)

-- 
2.31.1


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-12-29 18:41 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-19  6:25 [PATCH net-next 1/4] igb: move SDP config initialization to separate function Ruud Bos
2021-10-06 12:58 [PATCH net-next 0/4] igb: support PEROUT and EXTTS PTP pin functions on 82580/i354/i350 Ruud Bos
2021-10-06 12:58 ` [PATCH net-next 1/4] igb: move SDP config initialization to separate function Ruud Bos
2021-12-29 18:40 [PATCH net-next 0/4][pull request] 1GbE Intel Wired LAN Driver Updates 2021-12-29 Tony Nguyen
2021-12-29 18:40 ` [PATCH net-next 1/4] igb: move SDP config initialization to separate function Tony Nguyen

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).